| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause use of a hard-coded password. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. |
| When tarfile extracts a link on a system that doesn't support links, it falls back to extracting a member from the archive. In this case, the filter function is run twice: once for the extracted member, and once with name set to the location of the link. For one of the calls, the return value was ignored. Instead, the member should be skipped if either call returns None. |
| MaxKB is an open-source AI assistant for enterprise. Prior to version 2.10.5-lts, assistants with a tool, MCP tool, skill, or sub-application use SandboxShellBackend, which exposes an execute shell tool without excluding it and omits execute from interrupt_on, so human approval is not required. Untrusted chat or ingested content can therefore cause command execution; source deployments with MAXKB_SANDBOX disabled run commands directly as the application user, while the official root container's string-based gosu wrapper allowed shell metacharacters to execute outside the intended sandbox. This issue is fixed in version 2.10.5-lts. |
| A vulnerability in CRI-O checkpoint restore allows a user who can create a pod from a malicious checkpointed container to bypass the destination Kubernetes security context. The restored process may retain credentials, Linux capabilities, no_new_privs, and seccomp state from the checkpoint instead of enforcing the destination configuration. This can allow execution with elevated privileges across the container security boundary.
Affected upstream supported versions are CRI-O 1.34 and later. Downstream Red Hat products are affected from OCP 4.17 onward. Fixes have been applied to supported branches but are not yet released.
Exploitation requires permission to create a pod from a malicious checkpoint image and checkpoint restore functionality to be available. |
| Dell Update Package Framework, versions prior to 26.07.03, contains an Unchecked Return Value vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create()
nfsd4_create() stores the return value of nfsd4_acl_to_attr() in
status, but the switch(create->cr_type) block unconditionally
overwrites it in every branch. ACL translation errors are silently
discarded, and the CREATE proceeds without the requested ACL.
Add an early exit check after nfsd4_acl_to_attr(), matching the
pattern already used in nfsd4_setattr().
[ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Proper rollback if the ioremap fails
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status. |
| A flaw was found in the RHOAI training-operator. This vulnerability allows a user with standard edit or admin roles in any Kubernetes namespace to escalate their privileges. Through the creation of training jobs, an attacker can impersonate service accounts, access the host filesystem, and potentially execute arbitrary code remotely. This issue arises from the aggregation of training job permissions onto native Kubernetes edit and admin ClusterRoles, coupled with unrestricted PodTemplateSpec passthrough. |
| A flaw was found in the Data Science Pipelines Operator (DSPO). The operator's ClusterRole, which defines its permissions, includes extensive privileges beyond what is necessary for its operation. These excessive permissions, such as the ability to execute commands within pods and manage cluster-wide roles, could be exploited. If the DSPO pod were compromised, an attacker could leverage these privileges to gain full administrative control over the entire Kubernetes cluster. |
| Authentication Bypass via Hardcoded Master Verification Code vulnerability in Siam Ordering (siam-server) 1.0.0 allows remote unauthenticated attackers to log in as any user, merchant, or administrator. |
| A security flaw has been discovered in aiyiyi121 SxDevOps 1.0/1.1. This issue affects some unknown processing of the file backend/sxdevops/settings.py of the component Settings Handler. The manipulation results in hard-coded credentials. The attack may be performed from remote. The patch is identified as 2b4bf8585c3e731e7a8af30801ea46680bc783f9. Applying a patch is advised to resolve this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability was identified in aiyiyi121 SxDevOps 1.0/1.1. This vulnerability affects the function ensure_default_superuser of the file rbac/services.py. The manipulation leads to hard-coded credentials. The attack is possible to be carried out remotely. The identifier of the patch is 2b4bf8585c3e731e7a8af30801ea46680bc783f9. It is recommended to apply a patch to fix this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
| A weakness has been identified in dromara orion-visor up to 2.5.7. Affected by this issue is the function ExposeApiAspect.beforeExposeApi of the file ExposeApiAspect.java. Executing a manipulation can lead to hard-coded credentials. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| CM2507 IP cameras accept an empty password for a privileged account exposed through its ONVIF management service. An attacker with network access to the affected device could access privileged management functions and obtain device, user, media-profile, and stream configuration information. |
| Snipe-IT versions <= 8.6.3 (fixed in 8.7.0) do not check the return value of storage write operations in ImageUploadRequest::handleImages(). Because Laravel's default disk mode does not throw on failure, a silently failed Storage::disk('public')->put(...) call still caused the application to delete the previous image via deleteExistingImage() and to reassign and persist the model's image reference to the new filename, destroying the existing image and leaving the database row pointing at a file that was never written. A mirror problem existed in deleteExistingImage(), where a failed Storage::delete() still nulled the model's image field, orphaning the file on disk. The condition is not directly attacker-controlled: it is triggered when any legitimate authenticated user submits an image upload while the storage backend transiently fails (for example an S3 network error, a local filesystem permission problem, or quota exhaustion). The result is unrecoverable loss of the prior image and a durable inconsistency between the database and disk that requires manual reconciliation. All models whose controllers route through ImageUploadRequest::handleImages (assets, asset models, users, companies, manufacturers, locations, categories, suppliers, departments, and other image-carrying models) are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sa2ul - stop probe if context pool creation fails
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if
root is readonly while setting security xattr").
Always check if the root is read-only before performing the set acl
operation. |
| On affected platforms running Arista EOS with OpenConfig-related services (i.e., gNMI, gNSI, RESTCONF and NETCONF), sensitive requests and responses may be unintentionally logged. These may be stored on the local EOS device or recorded on remote accounting servers. Note that gRPC-based streaming via Streaming Telemetry Agent to CloudVision is not affected by this vulnerability.
Examples of sensitive information include:
- Sensitive CLI commands (e.g., "username bob secret myPass")
- Sensitive OpenConfig YANG leafs (e.g., "system/aaa/global/tacacs/config/secret-key")
This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks. |
| Browsertrix is a high-fidelity, browser-based crawling service for web archiving that can be self-hosted or used through Webrecorder's hosted instance. From 1.15.0 until 1.22.8, Browsertrix improperly sanitizes Git URLs specified as Custom Behaviors, allowing command injection through /api/orgs/*/crawlconfigs/validate/custom-behavior. A user with crawler or administrator permission on the specific instance can supply a crafted Git URL that executes arbitrary operating-system commands in the backend pod. Open registration or hosted free-trial access can make the required role broadly obtainable. Successful exploitation can expose, modify, or delete application database records, archived items, browser profiles, storage data, proxy credentials, and other configured service data. This issue is fixed in version 1.22.8. |
