| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject >8 byte return values on return-reading trampoline paths
btf_distill_func_proto() builds the function model used for the
fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has
accepted a 16-byte __int128 return value since the trampoline was
introduced: __get_type_size() returns the integer's type size, and the
return-type check only rejected ret < 0.
But the BPF trampoline preserves only 8 bytes of the return value (RAX on
x86, i.e. R0). For an attach type that reads the target's return value the
second half (RDX / R3) is neither saved nor restored, so a program
attached to a function returning a 16-byte value corrupts the value seen
by the real caller and itself observes only half of it. struct_ops
trampolines have the same limitation.
This affects the attach types that read the target's return value: fexit,
fmod_ret and fsession (plus the _multi variants of fexit and fsession),
and struct_ops. fentry/fentry_multi run before the target returns and are
unaffected.
Reject a >8 byte return value for these attach types in
bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for
struct_ops in bpf_struct_ops_desc_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args
On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc
args. However, the RV64 JIT currently does not perform sign-extension for
such kfunc args.
Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register
liveness analysis"), state pruning could potentially omit zero-extension
of 32-bit subregisters, which inadvertently masked the above issue by making
the args appear as if they had been properly sign-extended. After that
commit, the problem is exposed, causing the kfunc_call/kfunc_call_test4
selftest to fail.
Fix this by extending the existing sign-extension logic to handle signed
1-byte and 2-byte kfunc args as well. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and
ha->max_qpairs are u8. Deriving the queue count as
"ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board
(or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X
vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X
count of 1 zeroes it as well, and in target mode the subsequent
"ha->max_req_queues--" then underflows 0 to 255.
When the count is 0, qla2x00_alloc_queues() calls
kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is
not NULL, so the allocation check passes and the following
"ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory
or crashing the kernel.
Add qla_calc_queue_count() to clamp the derived value into
[1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and
use it at all three derivation sites (qla25xx_iospace_config(),
qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the
target-mode decrement so it cannot reintroduce a zero (which would in
turn underflow max_qpairs). |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readField in read.go reads the length of an AMQP byte-array field with type tag x into a signed int32 and passes the value directly to make when allocating the field buffer. A malicious or compromised broker can encode a value such as 0xFFFFFFFF, which becomes -1 and causes a len out of range runtime panic. The panic escapes the network reader goroutine and terminates the client process, including during connection.start server properties or message header table parsing. This issue is fixed in version 1.13.0. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field
tegra241_vintf_init_vsid() programs the guest-provided vSID into SID_MATCH,
whose VIRT_SID field spans bits [20:1] with bit 0 as the match-enable flag.
The HW therefore matches only a 20-bit Stream ID.
The bound check rejects only virt_sid > UINT_MAX, which admits a value far
wider than the field. The write "virt_sid << 1 | 0x1" then drops every bit
above 20: a virt_sid of 0x80000000 lands as SID_MATCH = 0x1, a valid match
on vSID 0, so the entry aliases the wrong Stream ID. Because vdev->virt_id
is guest-controlled, a VMM can trigger it.
Validate virt_sid against the field width with FIELD_MAX(), and program the
register with FIELD_PREP() so the value and the field stay consistent. |
| Incorrect conversion between numeric types in Microsoft JScript allows an unauthorized attacker to execute code over a network. |
| A numeric truncation weakness exists in the JSON parsing component of the MongoDB C++ Driver's BSON library. An actor who controls the text that an embedding application hands to the library's public JSON parsing interface, when that text is very large, can cause the library to read memory beyond the supplied buffer and return it to the caller, to silently accept only part of the input as a complete document, or to terminate the process. No MongoDB server, credentials, or non-default configuration is required; the effect is confined to the process that uses the library. |
| An incorrect numeric type conversion in the BSON document building component of the MongoDB C++ Driver may cause a length value to be interpreted incorrectly. When an application supplies an extremely large, non-terminated field name to the builder, the library may read memory outside the intended buffer and terminate the calling process. No authentication is required, but the calling application must pass the oversized name in a specific form. |
| An incorrect numeric conversion in the JSON parsing component of the MongoDB C Driver's BSON library may cause an unusually large text value to be silently shortened, or the corresponding field to be omitted, while the parsing operation still reports success and returns no error. An unauthenticated party who can supply the input processed by an application that uses this component may cause that application to hold data that does not match what was submitted, which may result in unintended alteration of data. |
| libjxl before 0.12 contains an integer underflow vulnerability in the container box parser that allows remote attackers to inject arbitrary metadata by exploiting 64-bit box size truncation to size_t on 32-bit platforms. Attackers can supply a crafted JPEG XL file causing the decoder to parse attacker-controlled codestream bytes as phantom box headers, enabling injection of arbitrary metadata (Exif, XMP, IPTC, JUMBF) and potential out-of-bounds reads. |
| Date::Manip versions through 7.00 for Perl return corrupted dates via non-ASCII decimal digits that pass the numeric range tests in check.
The parse regexes capture year, month and day with the `\d` shorthand, which on a character string matches the whole Unicode decimal digit property `\p{Nd}` and not just `[0-9]`. Date::Manip::Base::check then validates the captured fields with numeric comparisons alone (`$y<1 || $y>9999`, `$m<1 || $m>12`, `$d<1 || $d>$days`), and _parse_check stores the numified fields (`$y+0`). Perl truncates a string at the first character that is not an ASCII digit, so a field whose leading characters are ASCII digits numifies to an in-range prefix and satisfies every test: a year field of three ASCII digits followed by U+0664 ARABIC-INDIC DIGIT FOUR numifies to 202, giving the year 0202, and one non-ASCII digit in the month or day field shifts those fields the same way. The hour, minute and second fields match explicit ASCII character classes (`0?[0-9]`, `[0-5][0-9]`) and do not shift, though a non-ASCII digit in a fractional hour or minute field truncates the fraction.
Any caller that passes an untrusted character string to ParseDate() or Date::Manip::Date->parse() can get back a date that differs from the string it parsed, with no parse error. Where the parsed date gates logic such as an expiry check or a retention window, the shift goes unnoticed. |
| su-exec through 0.3 fails to validate numeric user and group identifiers parsed with strtol before assigning to uid_t and gid_t, allowing truncation of out-of-range values to zero. Attackers can supply large numeric identifiers that truncate to root's identifier, causing su-exec to execute target programs with root privileges instead of intended unprivileged accounts. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| FFmpeg before commit b4c199c contains an incorrect integer narrowing conversion in the AV1 RTP packetizer (libavformat/rtpenc_av1.c). The OBU size is cast to long before comparison against the remaining frame size. On targets where long is 32 bits, including 64-bit Windows, sufficiently large OBU size values are sign-flipped by the narrowing cast, producing a negative value that passes the payload size check. This allows an oversized OBU to bypass the safety bound on affected platforms, leading to out-of-bounds memory access when the oversized value is subsequently used as a copy length. |
| Incorrect conversion between numeric types in VC1 codec in libsavsvc.so prior to SMR Aug-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| A flaw was found in Undertow, an HTTP server, within its HTTP response header writing path. The `writeString()` method performs a silent narrowing cast from 16-bit Unicode characters to 8-bit bytes when writing HTTP response header values. A remote attacker can exploit this by supplying specific Unicode characters in user-controlled input that an application places into response headers. This can lead to the truncation of these characters into ASCII control characters or special symbols, potentially resulting in limited integrity impact or information disclosure if the application does not properly sanitize user input. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf()
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
