| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| vLLM through 0.29.0 contains a resource exhaustion vulnerability in MooncakeConnector where rejected prefill requests create ownerless transfer placeholders that are never reclaimed. Attackers can send rejected requests to exhaust sender task pools, causing valid requests to be delayed by up to 480 seconds while health checks continue returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: close shrinker/GC/fsnotify vs per-net shutdown race in filecache
The shrinker, GC worker, and fsnotify/lease callbacks can unhash an
nfsd_file from the rhashtable and then call
nfsd_file_dispose_list_delayed() to move it to the per-net dispose list.
If nfsd_file_cache_shutdown_net() runs concurrently, its rhashtable walk
misses the already-unhashed file, and its drain of the per-net dispose
list can run before the file has been queued. The file then sits on
the per-net list with no thread to drain it, leaking both the file and
its associated state.
The GC worker and shrinker already hold nfsd_gc_lock while walking the
LRU, but in the original code they release it before calling
nfsd_file_dispose_list_delayed(). The fsnotify/lease path
(nfsd_file_close_inode) has no synchronization at all.
Fix this by:
1. Widening nfsd_gc_lock in both nfsd_file_gc() and nfsd_file_lru_scan()
to cover the nfsd_file_dispose_list_delayed() call.
2. Wrapping nfsd_file_close_inode() in nfsd_gc_lock so that all three
callers of nfsd_file_dispose_list_delayed() hold the lock.
3. Adding a spin_lock/unlock(nfsd_gc_lock) barrier in
nfsd_file_cache_shutdown_net() after the purge, so that any
in-progress disposal has fully completed before the per-net list
is drained.
All operations inside the lock are non-sleeping (rhashtable lookups,
atomic bit/refcount ops, list moves, svc_wake_up), so the spinlock is
appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the newly created
one.
Check the error from btrfs_create_dio_extent() before replacing the
map and drop the input extent map on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix err_chunk memory leaks in INIT handling
When sctp_verify_init() encounters unrecognized parameters, it allocates an
err_chunk to report them. However, this chunk is leaked in several code
paths:
1. In sctp_sf_do_5_1B_init(), if security_sctp_assoc_request() fails after
sctp_verify_init() has populated err_chunk, the function returns
immediately without freeing it.
2. In sctp_sf_do_unexpected_init(), the same leak occurs on the
security_sctp_assoc_request() failure path.
3. In sctp_sf_do_unexpected_init(), on the success path after copying
unrecognized parameters to the INIT-ACK, the function returns without
freeing err_chunk, unlike sctp_sf_do_5_1B_init() which properly frees
it.
Fix all three leaks by adding sctp_chunk_free(err_chunk) calls before
returning in the error paths and on the success path in
sctp_sf_do_unexpected_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: fix wrong list iterated in add_direct_chain error path
In add_direct_chain(), newly allocated direct MR entries are added to
the local list 'tmp', which is spliced into mr->head only on success.
On the error path, the cleanup loop was incorrectly iterating over
mr->head instead of tmp.
Fix by iterating over 'tmp' in the err_alloc cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
The IIO core does not filter duplicate writes to the event enable
attribute, so writing the same value twice invokes
write_event_config() twice. Enabling twice leaks a runtime PM
reference, preventing the device from ever suspending again;
disabling twice underflows the usage count and triggers a
"Runtime PM usage count underflow" warning.
Bail out early when the requested state matches the current state.
While at it, switch to pm_runtime_resume_and_get() so a failed
resume is propagated to userspace instead of silently marking the
event enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix FF device cleanup on init failure
hidpp_ff_init() creates the input force-feedback device with
input_ff_create(), then allocates the HID++ FF private data,
effect ID array, and workqueue.
If any of those allocations fail after input_ff_create() succeeds,
the function returns an error without destroying the FF device.
Add an unwind path that frees the private allocations made by
hidpp_ff_init() and calls input_ff_destroy() for failures after
input_ff_create() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during early boot, real
module unload of a clk driver that owns GDSCs, or an OF-overlay tear-
down) the next gdsc_init() will end up trying to re-register a name
that is still in the list and pm_genpd_init() returns -EEXIST.
While we are here, flip the order so the consumer-facing OF provider
entry is the first thing removed -- otherwise a fresh
of_genpd_get_from_provider() call racing with the teardown could
attach to a domain that is mid-removal.
Iterate the scs[] array and pm_genpd_remove() each registered domain
after the subdomain links are torn down. The regulators stay devm-
managed (devm_regulator_get_optional() in gdsc_register()), so the
release happens automatically when the underlying device is unbound;
just the genpd accounting needs to be undone explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release the folio batch on iomap callback failures
A sashiko review of an unrelated patch points out that the folio
batch mechanism used for iomap zero range fails to release the batch
in a couple error scenarios. If either calls to ->iomap_end() or
->iomap_begin() fail, the direct return paths bypass the batch
cleanup.
The ->iomap_end() case is not a practical issue at the moment
because there is no user of the mechanism that returns an error from
this path. The ->iomap_begin() case is theoretically possible
because XFS can invoke the fill helper and error out at various
points thereafter. This subtly complicates things because XFS does
not transfer iomap_flags to the iomap data structure in the error
path.
To deal with both of these issues, first make sure to invoke the
cleanup helper in the error path for either fs callback. Second,
update the helper to clear the flag unconditionally and release the
batch so long as it is populated. This more clearly delineates the
purpose of the flag to control the I/O path and not necessarily the
status of the fbatch, so add a comment around this as well. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix dio leak on metadata mapping error
A failed integrity mapping holds a dio reference, so we need to go
through the full bio ending in case there were previously submitted
bio's in the sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
fat: release buffer head after rebuilding parent
fat_scan_logstart() leaves the matching directory entry's buffer head in
sinfo.bh for the caller to release, just like fat_scan().
fat_rebuild_parent() uses the directory entry to rebuild the parent inode
for the nostale_ro NFS export path, but does not release sinfo.bh after a
successful scan. Release it once fat_build_inode() has consumed the
directory entry data. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix request buffer leak in smb2_new_read_req()
smb2_new_read_req() allocates the request buffer with
smb2_plain_req_init() but only publishes it to the caller with
*buf = req at the very end of the function. Two error returns sit in
between:
rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server,
(void **) &req, total_len);
if (rc)
return rc;
if (server == NULL)
return -ECONNABORTED;
[...]
rdata->mr = smbd_register_mr(server->smbd_conn,
&rdata->subreq.io_iter,
true, need_invalidate);
if (!rdata->mr)
return -EAGAIN;
On either of them the buffer is neither released nor handed back, so
it is leaked. The caller cannot clean up after it: smb2_async_readv()
does 'goto out' on a non-zero return, which skips the
cifs_small_buf_release(buf) at async_readv_out, and buf has not been
assigned at that point in any case.
The write path has never had this problem. smb2_async_writev()
registers the memory region inline and jumps to its release label
instead of returning:
wdata->mr = smbd_register_mr(...);
if (!wdata->mr) {
rc = -EAGAIN;
goto async_writev_out;
}
Commit b7972092199f ("cifs: smbd: Retry on memory registration
failure") changed both sides from -ENOBUFS to -EAGAIN in a single
patch, which puts the two shapes next to each other.
Only the -EAGAIN return is reachable in practice, because
smb2_plain_req_init() calls smb2_reconnect() first and that already
fails with -EIO when server is NULL, before anything is allocated.
Both returns are given the same treatment here rather than leaving
one of them correct only by accident.
Because -EAGAIN is a replayable error, the failure also reaches the
retry block at the end of smb2_async_readv(), which marks the
subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be
retried rather than ending the I/O, and every attempt that reaches it
leaks another buffer. smb2_should_replay() short-circuits on
tcon->retry, so on a hard mount the attempt count is not bounded by
the retrans setting.
Only the asynchronous read path is affected. The synchronous
SMB2_read() caller passes rdata == NULL and the memory registration
block is guarded on rdata.
The memory registration failure path was pointed out by the Sashiko
AI reviewer while it was reviewing an unrelated patch to
smb2_async_readv(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free pending qentry in smc_llc_flow_stop() before memset
smc_llc_flow_stop() resets a flow struct with a blind memset:
spin_lock_bh(&lgr->llc_flow_lock);
memset(flow, 0, sizeof(*flow));
flow->type = SMC_LLC_FLOW_NONE;
spin_unlock_bh(&lgr->llc_flow_lock);
If flow->qentry is non-NULL at this point the pointer is overwritten without the
allocation being freed, leaking one kmalloc object.
A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set
flow->qentry after the legitimate message has been consumed by the waiter via
smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type
non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that
window the duplicate is stashed into flow->qentry, and then lost when
smc_llc_flow_stop() zeros the struct.
Call smc_llc_flow_qentry_del() inside the lock before the memset.
smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the
normal case where no entry is pending is a no-op. |
| Apache Karaf's XmlUtils cached XML parser/transformer factories in static ThreadLocal fields on long-lived container threads. Because a ThreadLocal value outlives the OSGi bundle that created it, repeated bundle or feature install, update, or refresh operations can leave successive bundle ClassLoader's pinned in memory and unreachable for garbage collection, leading to unbounded Metaspace growth and eventual denial of service of the Karaf instance. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 3.0.8 until 3.0.12, a client with maxConnections or maxConnectionsPerHost set above zero leaks one connection permit whenever TLS connection establishment fails before the handshake completes. NettyConnectListener removes the partitionKeyLock permit from NettyResponseFuture before every failure path is bound to the channel closeFuture, so an abort can leave the permit unreleased. Repeated failures can permanently lock out one host under a per-host limit or drain the shared pool under a global limit, blocking later requests even when no connection remains open. The default unlimited connection setting is not affected. This issue is fixed in version 3.0.12. |
| InternLM LMDeploy through 0.17.0 in DistServe prefill/decode disaggregation mode fails to release scheduler sessions because the proxy uses user-facing session IDs instead of internal scheduler keys. Unauthenticated attackers can send completion requests to the proxy endpoint that accumulate unreleased scheduler metadata and memory until the prefill worker is out-of-memory killed. |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-http2 prior to versions 4.1.135.Final and 4.2.15.Final, the `DelegatingDecompressorFrameListener` class orchestrates HTTP/2 decompression by embedding a per-stream `EmbeddedChannel` that runs the appropriate decompression codec (gzip, deflate, zstd) and forwards decompressed chunks to a wrapped listener. Each decompressed chunk is a pooled `ByteBuf` handed to an anonymous `ChannelInboundHandlerAdapter` tail handler, which becomes the sole owner responsible for releasing it. A remote peer could send frames that would result in the flow-controller throwing and so trigger a resource leak which at the end might take down the whole JVM due OOME. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, the RedisArrayAggregator handler permanently leaks pooled direct-memory buffers when a Redis pipeline connection closes before a RESP array aggregate completes. The handler retains child messages in per-handler state (`depths` field) but defines no `channelInactive`, `handlerRemoved`, or `exceptionCaught` method to release them when the pipeline tears down. Because the leaked buffers are slices of `PooledByteBufAllocator` chunks, they prevent those chunks from being returned to the JVM-wide direct-memory pool. Repeated connection churn by any network peer monotonically drains this shared pool, eventually causing allocation failures on all Netty channels in the process. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
