| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: staging/ipu7: fix async notifier UAF on probe error path
isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.
As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
corruption and a use-after-free the next time the list is walked.
The remove path already does the right thing by calling
isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on
the probe error path so the notifier is unregistered and cleaned up
before the device is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user()
Commit 9e91f8a6c868 ("ipmi:msghandler: Remove srcu for the
ipmi_interfaces list") dropped the synchronize_rcu() between unlinking
the command receivers from intf->cmd_rcvrs and freeing them, updating
only the comment that explains why the barrier is needed.
The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr()
walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows
rcvr->user from that lookup within the same read-side section. Without
the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a
reader still holds a pointer to it, causing a use-after-free.
The rework only made srcu unnecessary for the interfaces list; the
cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu()
before freeing the receivers. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/msm: Unwind probe state on registration failure
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global list entry in reverse setup order on
the corresponding failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix UAF in selftest IOPF reporting
IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from
group->pasid_array without synchronizing against PASID detach,
then a concurrent iommu_report_device_fault() can dereference
that borrowed handle's domain pointer after the detach erases
the handle and frees the backing struct iommufd_attach_handle.
TRIGGER_IOPF then dereferences the freed handle, causing a UAF.
Fix by adding a iopf_rwsem in mock_dev to follow the expected design
of a real driver. Hold its read side across the whole
iommu_report_device_fault() call, and its write side around every
path that attaches, detaches, or replaces a device domain.
This can block new reports and drains in-flight reports before an old
attach handle or the IOPF fault parameter can be removed.
Also take the write side while registering a mock device, since
it can invoke the mock driver's default-domain attach callback. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the interrupt through via_reset_pcictrl(); mask it again
afterwards.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Remove all sysfs files on registration failure
ipmi_add_smi() creates the nr_users and nr_msgs files before trying to
create the maintenance_mode file. If that last creation fails, the error
path removes only nr_users before dropping the final reference to the
interface.
Remove nr_msgs as well so no sysfs attribute embedded in the freed
interface remains registered. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix stalled modem TX queue after runtime resume
ipa_start_xmit() unconditionally stops the TX queue before calling
pm_runtime_get(), relying on the wake scheduled by runtime resume
(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.
But that work is queued from within the runtime resume callback,
before the device's power state reaches RPM_ACTIVE, so it can run
while the device is still RPM_RESUMING. The wake is then consumed
too early: the transmit it restarts stops the queue again,
pm_runtime_get() returns -EINPROGRESS without arranging any future
wake (deferred_resume exists only for RPM_SUSPENDING), and after the
resume completes nothing is left to wake the queue. Transmit stalls
permanently: packets pile up in the qdisc behind the stopped queue,
the device runtime-suspends, and since the netdev registers no
ndo_tx_timeout the watchdog never fires. Observed on SM7635
(Fairphone 6) as the cellular data path going permanently deaf
within hours, RX included, since nothing resumes the suspended
endpoints.
Close the window by making the wake work wait for the resume to
complete (pm_runtime_get_sync()) before waking the queue. Every
queue stop is then guaranteed a later wake that happens while power
is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules
the work. If the device could not be resumed, wake the queue anyway
so pending packets are dropped by the transmit path rather than
stranded.
The STARTED power flag used to narrow this window: a wake running
before the transmit path's stop suppressed that stop, but only once,
as the flag was cleared by the first stop it absorbed. Removing the
flag made a single transmit during an in-flight resume sufficient to
strand the queue, which is the form observed.
With an accelerated reproducer (autosuspend delay shortened to 5 ms,
~20 packets/s of TX), an unpatched kernel stalled three times in
230 s / 4380 packets; with this patch the same test ran 3601 s /
70298 packets without a stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: hold a reference to the route device in mctp_route_lookup()
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link()
smc_llc_srv_add_link() keeps add_llc pointing into the queue entry:
add_llc = &qentry->msg.add_link; smc_llc.c:1482
...
smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494
smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495
...
u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ?
(u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504
smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506
smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared
v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is
already freed. Before the Fixes: commit that branch always used
lgr->wr_rx_buf_v2 and add_llc was not used after the free.
Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot
and a link forced to max_recv_sge == 1: the entry is freed and read by
the same call, and the freeing frame is smc_llc_srv_add_link() itself.
[ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11
[ 2.523789]
[ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy)
[ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.523866] Workqueue: smc_hs_wq smc_listen_work
[ 2.523869] Call Trace:
[ 2.523870] <TASK>
[ 2.523871] dump_stack_lvl+0x53/0x70
[ 2.523872] print_report+0xd0/0x630
[ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523878] kasan_report+0xce/0x100
[ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660
[ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50
[ 2.523888] ? _printk+0xba/0xf0
[ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10
[ 2.523899] ? down_write+0xb0/0x130
[ 2.523903] ? __pfx_down_write+0x10/0x10
[ 2.523905] smc_listen_work+0x489e/0x4d00
[ 2.523907] ? kmem_cache_free+0x1c6/0x3a0
[ 2.523911] ? __pfx_smc_listen_work+0x10/0x10
[ 2.523913] ? release_sock+0x148/0x1d0
[ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0
[ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0
[ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 2.523920] process_one_work+0x633/0x1030
[ 2.523922] ? assign_work+0x11d/0x370
[ 2.523924] worker_thread+0x45b/0xd10
[ 2.523926] ? __pfx_worker_thread+0x10/0x10
[ 2.523928] ? __pfx_worker_thread+0x10/0x10
[ 2.523929] kthread+0x2c6/0x3b0
[ 2.523931] ? recalc_sigpending+0x15c/0x1e0
[ 2.523934] ? __pfx_kthread+0x10/0x10
[ 2.523935] ret_from_fork+0x36e/0x5a0
[ 2.523937] ? __pfx_ret_from_fork+0x10/0x10
[ 2.523938] ? __switch_to+0x572/0xdd0
[ 2.523943] ? __pfx_kthread+0x10/0x10
[ 2.523944] ret_from_fork_asm+0x1a/0x30
[ 2.523947] </TASK>
[ 2.523948]
[ 2.531253] Allocated by task 48:
[ 2.531399] kasan_save_stack+0x33/0x60
[ 2.531570] kasan_save_track+0x14/0x30
[ 2.531737] __kasan_kmalloc+0x8f/0xa0
[ 2.531905] __kmalloc_cache_noprof+0x158/0x370
[ 2.532100] smc_llc_enqueue+0x72/0x560
[ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.532491] tasklet_action_common+0x20f/0x8a0
[ 2.532714] handle_softirqs+0x18e/0x590
[ 2.532886] do_softirq+0x3b/0x60
[ 2.533036] __local_bh_enable_ip+0x61/0x70
[ 2.533221] __alloc_skb+0x732/0x890
[ 2.533384] rxe_init_packet+0x16b/0x4f0
[ 2.533567] prepare_ack_packet+0xb8/0x830
[ 2.533760] rxe_receiver+0x495/0x96e0
[ 2.533933] do_work+0x144/0x470
[ 2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: fix use-after-free and invalid seg operations in kset_replay()
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Check that the transfer is valid before accessing it
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clear any status flags and disable all
the interrupts to avoid triggering the same interrupts again. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe. |
| Axolotl before 0.19.0 contains a remote code execution vulnerability in the multipack patch path where trust_remote_code defaults to None instead of False, causing the security guard to be bypassed. Attackers can execute arbitrary Python code by crafting a malicious Hugging Face model repository selected as base_model, which is loaded with hardcoded trust_remote_code=True during AutoModelForCausalLM.from_pretrained. |
| Untrusted pointer dereference in Windows Failover Cluster allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: thunderbolt: Disable work before freeing tbt on remove
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent post-shutdown use-after-free in unlock_filesystem
Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs
nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the
handler confirms that nn->nfsd_serv is set. Once nfsd has shut down,
nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the
pointer intact, so the cancel helper iterates freed slab memory as an
array of struct list_head and then dereferences a bogus nfs4_client
when it takes clp->async_lock. A local administrator holding
CAP_SYS_ADMIN can reach this use-after-free by stopping the server and
then writing to unlock_filesystem; KASAN reports a slab-use-after-free
read in nfsd4_cancel_copy_by_sb().
nfsd4_revoke_states() walks the same state tables and for that reason
already runs only under nfsd_mutex with nn->nfsd_serv confirmed
present. Move the async COPY cancel into that protected section so
every NFSv4 state-table walker on this path observes a running server.
Async copies exist only while the server runs, so gating the cancel on
nn->nfsd_serv loses nothing. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from
run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru
runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and
hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip.
tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID
check and the BUG_ON would leave a window where destroy_dsq() can
invalidate the id between the two reads and still trigger the BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Guard legacy bundles without method_elm
The legacy write() path dispatches through a uverbs_api_write_method, but
the uverbs_attr_bundle passed to provider code does not have an ioctl
method element. If malformed provider input causes the common uverbs
validation code to emit an error message, uverbs_get_handler_fn()
dereferences the uninitialized method_elm pointer.
Initialize method_elm explicitly for legacy bundles and make
uverbs_get_handler_fn() return NULL when no ioctl method is present. The
legacy dispatcher continues to use its local write method, while the ioctl
path continues to use the registered ioctl handler. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: fix use-after-free
qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service
comes up, and the worker recovers battmgr through container_of() to issue
firmware requests. The PMIC GLINK client stays on the client list until
its devres release action runs, so a PDR notification can keep queueing
the work, and a pending or running worker can access battmgr after devres
frees it.
Make enable_work device-managed with devm_work_autocancel(), registered
before the PMIC GLINK client is allocated. The devres cleanup then
releases the client first, so no further notification can queue the work,
and cancels the work before battmgr is freed.
This issue was found by an in-house static analysis tool. |
