| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: Add a check for packet size after reading from shared memory
Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
Function kvm_io_bus_read() is called in function send_ipi_data(), buffer
size of parameter *val should be at least 8 bytes. Since some emulation
functions like loongarch_ipi_readl() and kvm_eiointc_read() will write
the buffer *val with 8 bytes signed extension regardless parameter len.
Otherwise there will be buffer overflow issue when CONFIG_STACKPROTECTOR
is enabled. The bug report is shown as follows:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: send_ipi_data+0x194/0x1a0 [kvm]
CPU: 11 UID: 107 PID: 2692 Comm: CPU 0/KVM Not tainted 6.17.0-rc1+ #102 PREEMPT(full)
Stack : 9000000005901568 0000000000000000 9000000003af371c 900000013c68c000
900000013c68f850 900000013c68f858 0000000000000000 900000013c68f998
900000013c68f990 900000013c68f990 900000013c68f6c0 fffffffffffdb058
fffffffffffdb0e0 900000013c68f858 911e1d4d39cf0ec2 9000000105657a00
0000000000000001 fffffffffffffffe 0000000000000578 282049464555206e
6f73676e6f6f4c20 0000000000000001 00000000086b4000 0000000000000000
0000000000000000 0000000000000000 9000000005709968 90000000058f9000
900000013c68fa68 900000013c68fab4 90000000029279f0 900000010153f940
900000010001f360 0000000000000000 9000000003af3734 000000004390000c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000003af3734>] show_stack+0x5c/0x180
[<9000000003aed168>] dump_stack_lvl+0x6c/0x9c
[<9000000003ad0ab0>] vpanic+0x108/0x2c4
[<9000000003ad0ca8>] panic+0x3c/0x40
[<9000000004eb0a1c>] __stack_chk_fail+0x14/0x18
[<ffff8000023473f8>] send_ipi_data+0x190/0x1a0 [kvm]
[<ffff8000023313e4>] __kvm_io_bus_write+0xa4/0xe8 [kvm]
[<ffff80000233147c>] kvm_io_bus_write+0x54/0x90 [kvm]
[<ffff80000233f9f8>] kvm_emu_iocsr+0x180/0x310 [kvm]
[<ffff80000233fe08>] kvm_handle_gspr+0x280/0x478 [kvm]
[<ffff8000023443e8>] kvm_handle_exit+0xc0/0x130 [kvm] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix a race when updating an existing write
After nfs_lock_and_join_requests() tests for whether the request is
still attached to the mapping, nothing prevents a call to
nfs_inode_remove_request() from succeeding until we actually lock the
page group.
The reason is that whoever called nfs_inode_remove_request() doesn't
necessarily have a lock on the page group head.
So in order to avoid races, let's take the page group lock earlier in
nfs_lock_and_join_requests(), and hold it across the removal of the
request in nfs_inode_remove_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: tas2781: Fix wrong reference of tasdevice_priv
During the conversion to unify the calibration data management, the
reference to tasdevice_priv was wrongly set to h->hda_priv instead of
h->priv. This resulted in memory corruption and crashes eventually.
Unfortunately it's a void pointer, hence the compiler couldn't know
that it's wrong. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/sclp: Fix SCCB present check
Tracing code called by the SCLP interrupt handler contains early exits
if the SCCB address associated with an interrupt is NULL. This check is
performed after physical to virtual address translation.
If the kernel identity mapping does not start at address zero, the
resulting virtual address is never zero, so that the NULL checks won't
work. Subsequently this may result in incorrect accesses to the first
page of the identity mapping.
Fix this by introducing a function that handles the NULL case before
address translation. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Limit access to parser->buffer when trace_get_user failed
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer
The data->block[0] variable comes from user. Without proper check,
the variable may be very large to cause an out-of-bounds bug.
Fix this bug by checking the value of data->block[0] first.
1. commit 39244cc75482 ("i2c: ismt: Fix an out-of-bounds bug in
ismt_access()")
2. commit 92fbb6d1296f ("i2c: xgene-slimpro: Fix out-of-bounds bug in
xgene_slimpro_i2c_xfer()") |
| In the Linux kernel, the following vulnerability has been resolved:
gve: prevent ethtool ops after shutdown
A crash can occur if an ethtool operation is invoked
after shutdown() is called.
shutdown() is invoked during system shutdown to stop DMA operations
without performing expensive deallocations. It is discouraged to
unregister the netdev in this path, so the device may still be visible
to userspace and kernel helpers.
In gve, shutdown() tears down most internal data structures. If an
ethtool operation is dispatched after shutdown(), it will dereference
freed or NULL pointers, leading to a kernel panic. While graceful
shutdown normally quiesces userspace before invoking the reboot
syscall, forced shutdowns (as observed on GCP VMs) can still trigger
this path.
Fix by calling netif_device_detach() in shutdown().
This marks the device as detached so the ethtool ioctl handler
will skip dispatching operations to the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net: kcm: Fix race condition in kcm_unattach()
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix slab-out-of-bounds in hfs_bnode_read()
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),
hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent
the access out of allocated memory and triggering the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read()
The hfsplus_bnode_read() method can trigger the issue:
[ 174.852007][ T9784] ==================================================================
[ 174.852709][ T9784] BUG: KASAN: slab-out-of-bounds in hfsplus_bnode_read+0x2f4/0x360
[ 174.853412][ T9784] Read of size 8 at addr ffff88810b5fc6c0 by task repro/9784
[ 174.854059][ T9784]
[ 174.854272][ T9784] CPU: 1 UID: 0 PID: 9784 Comm: repro Not tainted 6.16.0-rc3 #7 PREEMPT(full)
[ 174.854281][ T9784] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 174.854286][ T9784] Call Trace:
[ 174.854289][ T9784] <TASK>
[ 174.854292][ T9784] dump_stack_lvl+0x10e/0x1f0
[ 174.854305][ T9784] print_report+0xd0/0x660
[ 174.854315][ T9784] ? __virt_addr_valid+0x81/0x610
[ 174.854323][ T9784] ? __phys_addr+0xe8/0x180
[ 174.854330][ T9784] ? hfsplus_bnode_read+0x2f4/0x360
[ 174.854337][ T9784] kasan_report+0xc6/0x100
[ 174.854346][ T9784] ? hfsplus_bnode_read+0x2f4/0x360
[ 174.854354][ T9784] hfsplus_bnode_read+0x2f4/0x360
[ 174.854362][ T9784] hfsplus_bnode_dump+0x2ec/0x380
[ 174.854370][ T9784] ? __pfx_hfsplus_bnode_dump+0x10/0x10
[ 174.854377][ T9784] ? hfsplus_bnode_write_u16+0x83/0xb0
[ 174.854385][ T9784] ? srcu_gp_start+0xd0/0x310
[ 174.854393][ T9784] ? __mark_inode_dirty+0x29e/0xe40
[ 174.854402][ T9784] hfsplus_brec_remove+0x3d2/0x4e0
[ 174.854411][ T9784] __hfsplus_delete_attr+0x290/0x3a0
[ 174.854419][ T9784] ? __pfx_hfs_find_1st_rec_by_cnid+0x10/0x10
[ 174.854427][ T9784] ? __pfx___hfsplus_delete_attr+0x10/0x10
[ 174.854436][ T9784] ? __asan_memset+0x23/0x50
[ 174.854450][ T9784] hfsplus_delete_all_attrs+0x262/0x320
[ 174.854459][ T9784] ? __pfx_hfsplus_delete_all_attrs+0x10/0x10
[ 174.854469][ T9784] ? rcu_is_watching+0x12/0xc0
[ 174.854476][ T9784] ? __mark_inode_dirty+0x29e/0xe40
[ 174.854483][ T9784] hfsplus_delete_cat+0x845/0xde0
[ 174.854493][ T9784] ? __pfx_hfsplus_delete_cat+0x10/0x10
[ 174.854507][ T9784] hfsplus_unlink+0x1ca/0x7c0
[ 174.854516][ T9784] ? __pfx_hfsplus_unlink+0x10/0x10
[ 174.854525][ T9784] ? down_write+0x148/0x200
[ 174.854532][ T9784] ? __pfx_down_write+0x10/0x10
[ 174.854540][ T9784] vfs_unlink+0x2fe/0x9b0
[ 174.854549][ T9784] do_unlinkat+0x490/0x670
[ 174.854557][ T9784] ? __pfx_do_unlinkat+0x10/0x10
[ 174.854565][ T9784] ? __might_fault+0xbc/0x130
[ 174.854576][ T9784] ? getname_flags.part.0+0x1c5/0x550
[ 174.854584][ T9784] __x64_sys_unlink+0xc5/0x110
[ 174.854592][ T9784] do_syscall_64+0xc9/0x480
[ 174.854600][ T9784] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 174.854608][ T9784] RIP: 0033:0x7f6fdf4c3167
[ 174.854614][ T9784] Code: f0 ff ff 73 01 c3 48 8b 0d 26 0d 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 08
[ 174.854622][ T9784] RSP: 002b:00007ffcb948bca8 EFLAGS: 00000206 ORIG_RAX: 0000000000000057
[ 174.854630][ T9784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6fdf4c3167
[ 174.854636][ T9784] RDX: 00007ffcb948bcc0 RSI: 00007ffcb948bcc0 RDI: 00007ffcb948bd50
[ 174.854641][ T9784] RBP: 00007ffcb948cd90 R08: 0000000000000001 R09: 00007ffcb948bb40
[ 174.854645][ T9784] R10: 00007f6fdf564fc0 R11: 0000000000000206 R12: 0000561e1bc9c2d0
[ 174.854650][ T9784] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 174.854658][ T9784] </TASK>
[ 174.854661][ T9784]
[ 174.879281][ T9784] Allocated by task 9784:
[ 174.879664][ T9784] kasan_save_stack+0x20/0x40
[ 174.880082][ T9784] kasan_save_track+0x14/0x30
[ 174.880500][ T9784] __kasan_kmalloc+0xaa/0xb0
[ 174.880908][ T9784] __kmalloc_noprof+0x205/0x550
[ 174.881337][ T9784] __hfs_bnode_create+0x107/0x890
[ 174.881779][ T9784] hfsplus_bnode_find+0x2d0/0xd10
[ 174.882222][ T9784] hfsplus_brec_find+0x2b0/0x520
[ 174.882659][ T9784] hfsplus_delete_all_attrs+0x23b/0x3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add sanity check for file name
The length of the file name should be smaller than the directory entry size. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: fix race between polling and detaching
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch. |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: Fix OOB read due to missing payload bound check
Currently, The event_seq_changed() handler processes a variable number
of properties sent by the firmware. The number of properties is indicated
by the firmware and used to iterate over the payload. However, the
payload size is not being validated against the actual message length.
This can lead to out-of-bounds memory access if the firmware provides a
property count that exceeds the data available in the payload. Such a
condition can result in kernel crashes or potential information leaks if
memory beyond the buffer is accessed.
Fix this by properly validating the remaining size of the payload before
each property access and updating bounds accordingly as properties are
parsed.
This ensures that property parsing is safely bounded within the received
message buffer and protects against malformed or malicious firmware
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in dnode page
As Jiaming Zhang reported:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x17e/0x800 mm/kasan/report.c:480
kasan_report+0x147/0x180 mm/kasan/report.c:593
data_blkaddr fs/f2fs/f2fs.h:3053 [inline]
f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline]
f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855
f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195
prepare_write_begin fs/f2fs/data.c:3395 [inline]
f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594
generic_perform_write+0x2c7/0x910 mm/filemap.c:4112
f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline]
f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x546/0xa90 fs/read_write.c:686
ksys_write+0x149/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in the corrupted image, there is a dnode has the same
node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to
access block address in dnode at offset 934, however it parses the dnode
as inode node, so that get_dnode_addr() returns 360, then it tries to
access page address from 360 + 934 * 4 = 4096 w/ 4 bytes.
To fix this issue, let's add sanity check for node id of all direct nodes
during f2fs_get_dnode_of_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: initialize state_ptrs earlier in xfrm_state_find
In case of preemption, xfrm_state_look_at will find a different
pcpu_id and look up states for that other CPU. If we matched a state
for CPU2 in the state_cache while the lookup started on CPU1, we will
jump to "found", but the "best" state that we got will be ignored and
we will enter the "acquire" block. This block uses state_ptrs, which
isn't initialized at this point.
Let's initialize state_ptrs just after taking rcu_read_lock. This will
also prevent a possible misuse in the future, if someone adjusts this
function. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
Given mt8365_dai_set_priv allocate priv_size space to copy priv_data which
means we should pass mt8365_i2s_priv[i] or "struct mtk_afe_i2s_priv"
instead of afe_priv which has the size of "struct mt8365_afe_private".
Otherwise the KASAN complains about.
[ 59.389765] BUG: KASAN: global-out-of-bounds in mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm]
...
[ 59.394789] Call trace:
[ 59.395167] dump_backtrace+0xa0/0x128
[ 59.395733] show_stack+0x20/0x38
[ 59.396238] dump_stack_lvl+0xe8/0x148
[ 59.396806] print_report+0x37c/0x5e0
[ 59.397358] kasan_report+0xac/0xf8
[ 59.397885] kasan_check_range+0xe8/0x190
[ 59.398485] asan_memcpy+0x3c/0x98
[ 59.399022] mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm]
[ 59.399928] mt8365_dai_i2s_register+0x1e8/0x2b0 [snd_soc_mt8365_pcm]
[ 59.400893] mt8365_afe_pcm_dev_probe+0x4d0/0xdf0 [snd_soc_mt8365_pcm]
[ 59.401873] platform_probe+0xcc/0x228
[ 59.402442] really_probe+0x340/0x9e8
[ 59.402992] driver_probe_device+0x16c/0x3f8
[ 59.403638] driver_probe_device+0x64/0x1d8
[ 59.404256] driver_attach+0x1dc/0x4c8
[ 59.404840] bus_for_each_dev+0x100/0x190
[ 59.405442] driver_attach+0x44/0x68
[ 59.405980] bus_add_driver+0x23c/0x500
[ 59.406550] driver_register+0xf8/0x3d0
[ 59.407122] platform_driver_register+0x68/0x98
[ 59.407810] mt8365_afe_pcm_driver_init+0x2c/0xff8 [snd_soc_mt8365_pcm] |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: alienware-wmi-wmax: Fix `dmi_system_id` array
Add missing empty member to `awcc_dmi_table`. |
