| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| DLL hijacking vulnerabilities, caused by an uncontrolled search path in Silicon Labs (8-bit) IDE installer can lead to privilege escalation and arbitrary code execution when running the impacted installer. |
| Uncontrolled search path in some Intel(R) PCM software before version 202311 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| RemoteView PC Application Console versions prior to 6.0.2 contain an uncontrolled search path element vulnerability. If a crafted DLL is placed in the same folder with the affected product, it may cause an arbitrary code execution. |
| A vulnerability has been identified in Siemens Software Center (All versions < V3.5), Solid Edge SE2025 (All versions < V225.0 Update 10). The affected application is vulnerable to DLL hijacking. This could allow an attacker to execute arbitrary code via placing a crafted DLL file on the system. |
| Uncontrolled search path for some Display Virtualization for Windows OS software before version 1797 within Ring 2: Device Drivers may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| An Uncontrolled Search Path Element vulnerability in B&R Industrial Automation Scene Viewer, B&R Industrial Automation Automation Runtime, B&R Industrial Automation mapp Vision, B&R Industrial Automation mapp View, B&R Industrial Automation mapp Cockpit, B&R Industrial Automation mapp Safety, B&R Industrial Automation VC4, B&R Industrial Automation APROL, B&R Industrial Automation CAN Driver, B&R Industrial Automation CAN Driver CC770, B&R Industrial Automation CAN Driver SJA1000, B&R Industrial Automation Tou0ch Lock, B&R Industrial Automation B&R Single-Touch Driver, B&R Industrial Automation Serial User Mode Touch Driver, B&R Industrial Automation Windows Settings Changer (LTSC), B&R Industrial Automation Windows Settings Changer (2019 LTSC), B&R Industrial Automation Windows 10 Recovery Solution, B&R Industrial Automation ADI driver universal, B&R Industrial Automation ADI Development Kit, B&R Industrial Automation ADI .NET SDK, B&R Industrial Automation SRAM driver, B&R Industrial Automation HMI Service Center, B&R Industrial Automation HMI Service Center Maintenance, B&R Industrial Automation Windows 10 IoT Enterprise 2019 LTSC, B&R Industrial Automation KCF Editor could allow an authenticated local attacker to execute malicious code by placing specially crafted files in the loading search path..This issue affects Scene Viewer: before 4.4.0; Automation Runtime: before J4.93; mapp Vision: before 5.26.1; mapp View: before 5.24.2; mapp Cockpit: before 5.24.2; mapp Safety: before 5.24.2; VC4: before 4.73.2; APROL: before 4.4-01; CAN Driver: before 1.1.0; CAN Driver CC770: before 3.3.0; CAN Driver SJA1000: before 1.3.0; Tou0ch Lock: before 2.1.0; B&R Single-Touch Driver: before 2.0.0; Serial User Mode Touch Driver: before 1.7.1; Windows Settings Changer (LTSC): before 3.2.0; Windows Settings Changer (2019 LTSC): before 2.2.0; Windows 10 Recovery Solution: before 3.2.0; ADI driver universal: before 3.2.0; ADI Development Kit: before 5.5.0; ADI .NET SDK: before 4.1.0; SRAM driver: before 1.2.0; HMI Service Center: before 3.1.0; HMI Service Center Maintenance: before 2.1.0; Windows 10 IoT Enterprise 2019 LTSC: through 1.1; KCF Editor: before 1.1.0. |
| A security vulnerability has been detected in LibreWolf up to 143.0.4-1 on Windows. This affects an unknown function of the file assets/setup.nsi of the component Installer. Such manipulation leads to uncontrolled search path. The attack must be carried out locally. Attacks of this nature are highly complex. The exploitability is reported as difficult. Upgrading to version 144.0-1 mitigates this issue. The name of the patch is dd10e31dd873e9cb309fad8aed921d45bf905a55. It is suggested to upgrade the affected component. |
| An issue was discovered in the Agent in Delinea Privilege Manager (formerly Thycotic Privilege Manager) before 12.0.1096 on Windows. Sometimes, a non-administrator user can copy a crafted DLL file to a temporary directory (used by .NET Shadow Copies) such that privilege escalation can occur if the core agent service loads that file. |
| Sub::HandlesVia for Perl before 0.050002 allows untrusted code from the current working directory ('.') to be loaded similar to CVE-2016-1238.
If an attacker can place a malicious file in current working directory, it may be loaded instead of the intended file, potentially leading to arbitrary code execution.
Sub::HandlesVia uses Mite to produce the affected code section due to CVE-2025-30672 |
| The affected setup component is vulnerable to DLL hijacking. This could allow an attacker to execute arbitrary code when a legitimate user installs an application that uses the affected setup component. |
| DLL hijacking vulnerabilities, caused by an uncontrolled search path in the USBXpress Dev Kit
installer can lead to privilege escalation and arbitrary code execution when running the impacted installer. |
| BleachBit cleans files to free disk space and to maintain privacy. BleachBit for Windows up to version 4.6.2 is vulnerable to a DLL Hijacking vulnerability. By placing a malicious DLL with the name uuid.dll in the folder C:\Users\<username>\AppData\Local\Microsoft\WindowsApps\, an attacker can execute arbitrary code every time BleachBit is run. This issue has been patched in version 4.9.0. |
| Uncontrolled search path in some Libva software maintained by Intel(R) before version 2.20.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Uncontrolled search path for some Intel(R) RealSense(TM) Dynamic Calibrator software before version 2.14.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Uncontrolled search path in Intel(R) Graphics Command Center Service bundled in some Intel(R) Graphics Windows DCH driver software before versions 31.0.101.3790/31.0.101.2114 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Uncontrolled search path for some Intel(R) QAT software before version 2.3.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| DLL's are not digitally signed when loaded in ASPECT's configuration toolset exposing the application to binary planting during device commissioning.This issue affects ASPECT-Enterprise: through 3.*; NEXUS Series: through 3.*; MATRIX Series: through 3.*. |
| The Auto-update service for Okta Verify for Windows is vulnerable to two flaws which in combination could be used to execute arbitrary code. |
| Uncontrolled search path element issue exists in SonicDICOM Media Viewer 2.3.2 and earlier, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with the privileges of the running application. |
| `gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue.
In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original.
On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors. |
