| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA
topology information for the PCI device, such as single-socket boards
that don't expose device-to-node affinity. Passing -1 directly into
cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds
array read caught by UBSAN:
UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
Fall back to cpu_online_mask when no NUMA node is available, rather than
assuming dev_to_node() always returns a valid node index. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix uninitialized transport header access in alb_determine_nd()
alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers.
However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets
or forwarded packets), skb->transport_header is not guaranteed to be
initialized. While pskb_network_may_pull() ensures the packet data is
linear starting from the network header, it does not set or adjust the
transport header offset.
Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory.
Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(),
and reload ipv6hdr in case pskb_may_pull() reallocated skb->head.
Also remove the unused bond argument from alb_determine_nd(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_micfil: balance mclk enable/disable
hw_params() enables mclk unconditionally and hw_free() disables it
unconditionally, but the PCM core does not guarantee 1:1 pairing:
hw_free() can run without hw_params(), and hw_params() can be called
multiple times from the SETUP state. This triggers an "already
disabled" WARN() in the first case and leaks an enable reference in
the second, leaving the clock ungateable.
Guard both sides with the existing mclk_flag, as fsl_sai.c does with
mclk_streams. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: fbtft: make dirty_lock IRQ-safe
fbtft_mkdirty() can be reached from the fbcon rendering path while
processing printk() in hardirq context. Meanwhile, dirty_lock is also
taken by fbtft_deferred_io() in workqueue context with local interrupts
enabled.
Lockdep reports a possible IRQ lock inversion involving dirty_lock and
console_owner. A hardirq can interrupt a CPU holding dirty_lock and
enter the console rendering path, which can attempt to acquire
dirty_lock again.
The following lockdep report was observed on an RK3566 system with
CONFIG_PROVE_LOCKING enabled:
WARNING: possible irq lock inversion dependency detected
swapper/2/0 just changed the state of lock:
(console_owner){-...}-{0:0}
but this lock took another, HARDIRQ-unsafe lock in the past:
(&par->dirty_lock){+.+.}-{2:2}
CPU0 CPU1
---- ----
lock(&par->dirty_lock);
local_irq_disable();
lock(console_owner);
lock(&par->dirty_lock);
<Interrupt>
lock(console_owner);
*** DEADLOCK ***
Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for
fbtft_deferred_io(). They only access the dirty line range, so the
IRQ-off regions remain short. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header().
syzbot reported BUG() in sock_sendmsg_nosec(). [0]
The problem is that tpacket_parse_header() casts user-provided
tpacket_hdr.tp_len, which is u32, to int.
If the length is larger than INT_MAX, the following condition
in tpacket_parse_header() passes,
if (unlikely(tp_len > size_max))
and any negative value can be returned to the caller, up to
sock_sendmsg_nosec().
The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast
to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec().
*(uint64_t*)0x200000000008 = 0xfffffdef;
...
syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul);
Let's define the local tp_len as u32 in tpacket_parse_header().
[0]:
kernel BUG at net/socket.c:803!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803
Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28
RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293
RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80
RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef
RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8
R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001
R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310
FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0
Call Trace:
<TASK>
__sock_sendmsg net/socket.c:815 [inline]
sock_write_iter+0x2de/0x3e0 net/socket.c:1266
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f173130ecb9
Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9
RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388
R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: restore network header before routing and forwarding
ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH)
while skb_network_header() points at the IPv6 header.
When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data
position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately
followed the fixed IPv6 header. If another extension header (such as a
Hop-by-Hop options header) precedes the SRH, skb_network_offset()
remained negative.
This led to two problems:
1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes
__skb_flow_dissect() which passes the negative skb_network_offset()
to flow dissection, breaking BPF and C flow dissector logic.
2. If forwarded via ip6_forward() or redirected via act_mirred, downstream
handlers (like sch_fragment() or neighbour output) pass the negative
offset as an unsigned length, triggering OOB memcpy or buffer overflows.
Fix this by pushing -skb_network_offset(skb) before routing, ensuring
skb_network_offset(skb) is 0 for route lookup / flow dissection as well as
downstream forwarding. On the loopback path, pull skb_transport_offset(skb)
to restore skb->data to the SRH before looping back. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Dont send random pad bytes in RESET/ACTIVATE messages
The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer.
Replace the strcpy(data, l->if_name) with memcpy() so that the
pad bytes are actually written (l->if_name[] is zero padded)
rather than sending random bytes from the skb to the remote system.
Replace two other strcpy() with strscpy(). |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL deref in tipc_named_node_up() on empty publication list
User-space applications can bind a large number of service addresses to
one or more sockets. Each binding of a local-scope service address inserts
one entry (publication) into the TIPC name table. If the number of these
publications exceeds TIPC_MAX_PUBL (65535), protocol service types
(such as node state and link state) are no longer inserted into the name
table. This causes two issues:
1. User-space applications subscribing to node or link up/down events
stop receiving notifications.
2. A NULL pointer dereference can occur:
BUG: kernel NULL pointer dereference, address: 00000000000000d0
...
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full)
...
RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221)
...
Call Trace:
<IRQ>
tipc_node_write_unlock (net/tipc/node.c:428)
tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189)
tipc_udp_recv (net/tipc/udp_media.c:389)
Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute)
-----------------------------|-----------------------------
| ...
| list_for_each_entry(publ, pls, binding_node) {
| ...
| __skb_queue_tail(list, skb);
| ...
| }
| ...
| hdr = buf_msg(skb_peek_tail(list));
... |
tipc_nametbl_publish(); |
If 'tipc_nametbl_publish()' (Thread 1) fails because the number of
local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a
result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference.
Fix these issues by allowing protocol service types (node state, link state,
and topology server) to be inserted into the name table unconditionally.
This ensures that users subscribing to these types always receive
notifications. In addition, the maximum number of local user publications is
reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size
calculated in tipc_link_set_queue_limits() remains valid. |
| A flaw was found in NetworkManager-iodine, the iodine VPN plugin for NetworkManager. A local unprivileged user can exploit a vulnerability in how the 'nameserver' setting is processed when establishing an iodine VPN connection. By embedding shell metacharacters (special characters that can execute commands) in the 'nameserver' value, an attacker can inject and execute arbitrary commands. These commands run with root privileges before the application drops its elevated permissions, leading to local privilege escalation. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3, Stored XSS via TLS peer-certificate DN in stream-management UI (sibling of V-11). lines 102/106/110 render peercertsubject / peercertissuer with raw <%= %> and no fmtstring(). RFC4514 backslash-escaping of </> is HTML-inert and bypassable (<img ... //>). Requires non-default config: a stream TLS listener with verifypeer and an attacker-obtainable trusted cert with a malicious Same as the connection.ejs finding, against operators viewing the stream-connection detail rabbitmqstream + rabbitmqstreammanagement enabled with a TLS listener using verifypeer Attacker can obtain a certificate signed by a CA the listener trusts, with attacker-chosen DN An operator views the. This issue is fixed in versions 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, AMQP 1.0 management exchange.declare skips alternate-exchange permission check. pUT /exchanges/:name (lines 192-240) checks only configure on the declared exchange and passes XArgs straight to rabbitexchange:declare/7. It omits the checkreadpermitted(X) + checkwritepermitted(AE) that rabbitchannel.erl:2540-2548 enforces for the alternate-exchange argument on the AMQP 0-9-1 path. The same file already implements the analogous DLX check for queues (lines 708-719), confirming this is a missing-check bug rather than intentional A user with only configure on exchange X can route X's unroutable messages into an alternate exchange they have no write permission AMQP 1.0 enabled (default in RabbitMQ 4.x) Attacker has configure on at least one exchange but lacks write on the target. This issue is fixed in versions 4.2.9 and 4.3.3. |
| Adobe Commerce is affected by an Incorrect Authorization vulnerability that could result in privilege escalation. An attacker with high privileges could exploit this vulnerability to gain elevated access to restricted resources. Exploitation of this issue does not require user interaction. |
| Adobe Commerce is affected by an Incorrect Authorization vulnerability that could result in a Security feature bypass. An attacker with high privileges could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue does not require user interaction. |
| Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6, protected tag bypass via bulk-delete. dELETE /api/users/:name refuses to delete users tagged protected (rabbitmgmtwmuser:deleteresource/2 checks isprotecteduser). POST /api/users/bulk-delete iterates the supplied username list and calls rabbitauthbackendinternal:deleteuser/2 directly , that function has no protected-tag check , so the guard is silently An administrator can delete protected-tagged service accounts via the bulk endpoint, bypassing a safeguard the test suite confirms is rabbitmqmanagement enabled Attacker has the administrator tag A protected-tagged user. This issue is fixed in versions 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6. |
| Adobe Commerce is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Exploit depends on conditions beyond the attacker's control. Scope is changed. |
| Adobe Commerce is affected by an Incorrect Authorization vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized read and write access, causing a limited disruption to availability. Exploitation of this issue does not require user interaction. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6, Atom table exhaustion via management API node field. pUT /api/queues/:vhost/:name (and the exchanges and bindings endpoints) accepts a node JSON field. The value goes through rabbitnodes:make → listtoatom with no cluster membership check first. Each unique value permanently leaks one atom. A March 2026 refactoring (ea61ce2563) introduced safe helpers in rabbitmgmtnodes.erl (parsenodename, safeatom, and requirenodename, using binarytoexistingatom) and fixed several callers (QQ replica ops, wmauthattempts, wmnodememoryets, getsortreverse, and rabbitfederationmgmt), but getnode/1 in rabbitmgmtutil.erl:880-885, the primary vector used by directrequest/6, was not Roughly 900K requests crash the VM via systemlimit, and all tenants lose Any user with the management tag and one vhost, the lowest privilege This issue is fixed in versions 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6. |
| BerriAI LiteLLM before 1.101.0-rc.1 contains a tenant isolation bypass vulnerability in the semantic cache layer that allows authenticated users to read other tenants' cached responses by exploiting a metadata key mismatch between _get_semantic_cache_tenant_scope() and _get_metadata_variable_name(). Attackers holding a valid virtual key can submit semantically similar prompts on affected routes such as /v1/responses and /bedrock/* to retrieve cached responses containing other tenants' personally identifiable information, financial data, or source code, and can cause agentic front-ends to auto-execute attacker-supplied tool calls under victim credentials by returning cached function_call or tool_calls payloads to a different principal. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, get_auth_mechanism/1 used term_to_binary/1 on the strict_auth_mechanism or preferred_auth_mechanism atom when clearing the corresponding cookie, producing a non-ASCII cookie name that violates RFC 6265 and can prevent the browser from deleting the preference. The issue is not directly exploitable for code execution or data exfiltration; its security relevance is limited to stale authentication-mechanism preferences persisting across logout and login cycles. This issue is fixed in versions 4.2.8 and 4.3.2. |
