Export limit exceeded: 396426 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14464 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93140 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while writing the Logical Volume Integrity Descriptor (LVID) buffer to the block device, the block layer's completion handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the buffer. However, the buffer still contains valid LVID data in memory. If the filesystem is subsequently remounted read-write or synced, `udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call `mark_buffer_dirty()`. This triggers a spurious `WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()` because the buffer is not marked uptodate, even though its in-memory contents are valid and are about to be overwritten. To prevent this spurious warning, unconditionally set the `BH_Uptodate` flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and `udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and matches the workaround previously applied to `udf_close_lvid()` in commit 853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty"). Extending this workaround ensures consistent behavior across all LVID updates. Buffer I/O error on dev loop0, logical block 128, lost sync page write ------------[ cut here ]------------ !buffer_uptodate(bh) WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087 ... Call Trace: <TASK> udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078 udf_reconfigure+0x336/0x540 fs/udf/super.c:679 reconfigure_super+0x232/0x8f0 fs/super.c:1080 vfs_cmd_reconfigure fs/fsopen.c:268 [inline] vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297 __do_sys_fsconfig fs/fsopen.c:463 [inline] __se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350 do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 </TASK> | ||||
| CVE-2026-93173 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks __bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs. security_bpf_prog_free() called from there fires bpf_prog_free in softirq; if a sleepable LSM prog is attached to that hook, might_fault() BUGs: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038 preempt_count: 101, expected: 0 Call Trace: <IRQ> __bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255 bpf_trampoline_6442549705+0x53/0xd7 security_bpf_prog_free+0xde/0x130 security/security.c:5465 __bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365 rcu_do_batch kernel/rcu/tree.c:2617 [inline] handle_softirqs+0x236/0x800 kernel/softirq.c:622 </IRQ> The call_rcu/call_rcu_tasks_trace split reflects the freed program's sleepability, not that of any attached observer. security_bpf_prog_free() also frees prog->aux->security, which has to stay after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks rather than move the call. Non-sleepable observers still run there. | ||||
| CVE-2026-93182 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix overflow in update_tg_cfs_runnable() A divide-by-zero crash is observed when running hackbench: [14697.488452] CPU: 112 UID: 0 PID: 124791 Comm: hackbench Not tainted 7.1.0-rc2+ [14697.492627] RIP: 0010:propagate_entity_load_avg+0x35f/0x3e0 [14697.506799] <TASK> [14697.507411] __dequeue_task+0x2b4/0xc70 [14697.508677] dequeue_task_fair+0x36/0x370 [14697.509047] dequeue_task+0x101/0x2f0 [14697.509426] __schedule+0x1b1/0x1a00 [14697.510868] anon_pipe_read+0x3da/0x450 [14697.511400] vfs_read+0x361/0x390 [14697.512053] __x64_sys_read+0x19/0x30 The divide-by-zero happens here: if (scale_load_down(gcfs_rq->load.weight)) { load_sum = div_u64(gcfs_rq->avg.load_sum, scale_load_down(gcfs_rq->load.weight)); } gcfs_rq->load.weight is an insane large value and is truncated to the lower 32 bits by div_u64, which happen to be 0. Using AI for investigation, the cause is a u32 overflow in update_tg_cfs_runnable(), and flat pickup became a victim when using tg_tasks(): u32 new_sum, divider; ... new_sum = se->avg.runnable_avg * divider; <-- boom The following sequence shows how this triggers the crash: propagate_entity_load_avg() update_tg_cfs_runnable() # u32 overflow corrupts runnable_sum __update_load_avg_cfs_rq() ___update_load_avg() # computes insane runnable_avg update_tg_load_avg() # propagates to tg->runnable_avg update_cfs_group() calc_concur_shares() tg_tasks() # long-to-int truncation, negative nr reweight_entity() # corrupted se->load.weight update_load_add() # corrupted cfs_rq->load.weight propagate_entity_load_avg() update_tg_cfs_load() div_u64() # divide-by-zero Fix by widening new_sum from u32 to u64 (no need to force tg_tasks() to return unsigned long after this fix) | ||||
| CVE-2026-93184 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_audmix: rework runtime PM handling in probe After pm_runtime_enable() the AUDMIX block is powered off and stays suspended until the first runtime resume. Register writes issued between probe() and the first resume (e.g. from DAPM or ALSA control paths) target unpowered hardware and cause a system hang. Fix this by calling pm_runtime_resume_and_get() immediately after pm_runtime_enable() to power the hardware up and enable its clocks. Release the reference afterwards with pm_runtime_put() to allow the runtime PM framework to suspend the device and switch the regmap to cache-only mode when idle. When CONFIG_PM is disabled or runtime PM is not enabled, pm_runtime_* calls are stubs that do not power up the hardware. Handle this case explicitly by calling fsl_audmix_runtime_resume() directly so the hardware is always initialised and its clocks are enabled, ensuring register accesses succeed regardless of PM configuration. | ||||
| CVE-2026-93198 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate the persisted dirty_tail chain at load The writeback worker follows the persisted dirty_tail chain, which is decoded from the cache device independently of the key_tail chain that cache_replay() walks and bounds. A crafted image, whose on-media fields are authenticated only by a crc32c with a fixed seed, can aim dirty_tail at a chain of last ksets that never terminates, so cache_writeback_fn() re-arms itself with no delay forever. Walk the dirty_tail chain once at load with the same hop cap cache_replay() uses and fail the table load with -EIO if it does not reach an end within n_segs hops. | ||||
| CVE-2026-93199 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Do not treat master device as a duplicate target i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C device with the same PID as the reference device. The search can match master->this, causing the controller itself to be returned as a duplicate. Since the controller is not a target device, it cannot be a duplicate of one. Exclude master->this from matching so that the function only returns real duplicate target devices. | ||||
| CVE-2026-93450 | 1 Go-openapi | 1 Swag | 2026-09-19 | 7.5 High |
| go-openapi/swag jsonutils before 0.27.1 contains a stack overflow vulnerability in ordered JSON parsing and serialization due to unbounded recursion with no depth limit. Remote unauthenticated attackers can submit deeply nested JSON documents to services accepting OpenAPI specifications, causing fatal stack overflow that terminates the process and all in-flight requests. | ||||
| CVE-2026-93156 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rk3288 - fail ahash requests on HASH idle timeout rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the final DMA transfer, but ignores the poll result. If the hash engine never becomes idle, the driver still reads the digest registers and finalizes the request with the previous success value. Store the poll result and finalize the request with the timeout error before reading the digest registers. | ||||
| CVE-2026-93157 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: xilinx-trng - propagate timeout before any data is read xtrng_readblock32() polls for 16-byte chunks but returns the number of bytes read even when the first poll times out. Its caller then treats a zero return as a short successful read, and partial reads for full 32-byte blocks can make the tail copy use a fixed block offset rather than the amount already produced. Return the poll error when no data has been read, preserve partial positive returns after some data is available, stop the generator on all collection exits, and append tail bytes at the current output count. | ||||
| CVE-2026-93160 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-ecc - reject hardware ECDH without a public key The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the private key stored in the device. However, the public key is cached only after atmel_ecdh_set_secret() successfully generated that private key for the current tfm. atmel_ecdh_generate_public_key() already rejects requests when no public key is cached. Add the same check to atmel_ecdh_compute_shared_secret() to prevent the device from using a private key that was not generated for the current tfm. | ||||
| CVE-2026-93082 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind P2A receiver mailbox setup failure mailbox_chan_setup() can request an additional P2A receiver channel after successfully acquiring the primary P2A channel. If that later request fails, the function returns immediately and leaves the primary channel allocated. Unwind the primary mailbox channel before returning the error so probe deferral or other setup failures do not leave the channel busy for later probe attempts. | ||||
| CVE-2026-93097 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: Break poison list loop on an empty payload A device that returns count == 0 with CXL_POISON_FLAG_MORE set on every iteration never advances nr_records, so the max_errors guard never trips and the do/while loops forever while holding poison.mutex. That hangs the sysfs-triggered scan thread and blocks all subsequent poison operations on the device. The existing "Protect against an uncleared _FLAG_MORE" guard was intended to bound a misbehaving device but does not cover the count == 0 case. Stop the loop on an empty payload so a malfunctioning or malicious device cannot wedge the poison scan. | ||||
| CVE-2026-93103 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the device was inserted into the unit table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the zero-initialized unit remains zero, so full cleanup can remove an unrelated device from index 0. Release only the rdmavt allocation and return immediately while the unit table has not acquired the device. | ||||
| CVE-2026-93045 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the clipped range. | ||||
| CVE-2026-93058 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and confirmed by manual source review. Patchwork: https://patchwork.freedesktop.org/patch/738905/ | ||||
| CVE-2026-92495 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap flags, but a read-only mapping can still retain VM_MAYWRITE. nd later be upgraded with mprotect(PROT_WRITE). This can bypass the write check that only runs at mmap time. Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page branch, matching the existing policy that userspace writes are not expected for these pages. | ||||
| CVE-2026-93072 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-irqc: Fix generic interrupt chip leak on remove The driver allocates domain generic chips probe. However, on driver removal, the generic chips are not automatically freed when the interrupt domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by setting IRQ_DOMAIN_FLAG_DESTROY_GC on the interrupt domain; this lets the interrupt domain core automatically release all generic chips when irq_domain_remove() is invoked, removing the need for manual cleanup calls in error paths and remove callback. | ||||
| CVE-2026-93076 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear vmemmap_shift when binding static pgmap Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static device from device_dax (which may set vmemmap_shift based on alignment) to fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly zero it before devm_memremap_pages() so the vmemmap is built for order-0 folios as fsdev requires. | ||||
| CVE-2026-93081 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the same ID while the old device is still registered. The final device release callback is also a possible cleanup path when SCMI children are deleted by driver core recursion rather than __scmi_device_destroy(). Release the SCMI bus ID from a common helper used by destroy, register-failure and final-release paths, and clear scmi_dev->id after freeing it so the final release cannot free the same ID again. | ||||
| CVE-2026-92502 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, the writeback thread can hit the WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the superblock is being remounted read-only during reboot: Workqueue: writeback wb_workfn (flush-253:0) RIP: 0010:ext4_journal_check_start+0x8b/0xd0 Call Trace: __ext4_journal_start_sb+0x3c/0x1e0 mpage_prepare_extent_to_map+0x4af/0x580 ext4_do_writepages+0x3c0/0x1080 ext4_writepages+0xc8/0x1a0 do_writepages+0xc4/0x180 __writeback_single_inode+0x45/0x2f0 writeback_sb_inodes+0x26b/0x5d0 __writeback_inodes_wb+0x54/0x100 wb_writeback+0x1ac/0x320 wb_workfn+0x394/0x470 And followed by the warning: EXT4-fs warning (device vda1): ext4_evict_inode:195: inode #6263: comm (sd-umount): data will be lost This issue is not reproduced every time, but frequently. The reproduction step is to create a VM with 8 CPUs, 16G memory and setup data=journal: sudo tune2fs -o journal_data /dev/vda1 Run fio: rm -f fiotest fio --name=fiotest --rw=randwrite --bs=4k --runtime=6 --ioengine=libaio --iodepth=256 --numjobs=8 --filename=fiotest --filesize=30G --group_reporting Reboot the VM, and check the console output from: virsh console testvm But there is no dirty inode, folio_clear_dirty_for_io clears PG_dirty but leaves tags PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE set which are only cleared by __folio_start_writeback. In data=journal mode, jbd2 checkpoints the journalled data to its final location and clears its own dirty flag without touching folio PG_dirty or xarray dirty flags. The commit f4a2b42e7891 ("ext4: fix stale xarray tags after writeback") fixes when PG_dirty is still set but there is no dirty page. Another case is PG_dirty is cleared, but PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE is still set. In this case, writeback thread checks clean folio and skips it in mpage_prepare_extent_to_map: if (!folio_test_dirty(folio) || ... folio_unlcok(folio); continue And never reaches ext4_bio_write_folio where the commit f4a2b42e7891 clears the stale xarray tags. Print debug logs after the filesystem is remounted read-only: writepages RDONLY nrpages=2048 dirtytag=1 wbtag=0 towrite=1 sync=0 And all folios are actually clean: folio idx=3 dirty=0 wb=0 checked=0 dirtybuf=0 jbddirty=0 mapped=1 ... We need to clear the xarray stale tags for such clean folios by cycling them through writeback in the skip path, the same way f4a2b42e7891 does in ext4_bio_write_folio. | ||||