| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata()
sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a
strong reference under hdev->lock:
hci_dev_lock(hdev);
hcon = hci_conn_hash_lookup_handle(hdev, handle);
...
conn = sco_conn_hold_unless_zero(hcon->sco_data);
hci_dev_unlock(hdev);
but the pointer is cleared from the other side without that lock. When
the last sco_conn reference is dropped, sco_conn_free() ran
conn->hcon->sco_data = NULL;
with no hdev->lock held, so the RX path could read hcon->sco_data and
call kref_get_unless_zero() on an sco_conn that was concurrently freed:
BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160
Write of size 4 by task kworker/u17:0
Workqueue: hci0 hci_rx_work
Call Trace:
sco_conn_hold_unless_zero+0xbe/0x160
sco_recv_scodata+0x13f/0x490
hci_rx_work+0x3af/0x730
kref_get_unless_zero() only guards against a zero refcount, not against
the backing memory already being freed.
Give hcon->sco_data an actual reference on the sco_conn it points to, so
the object cannot be freed while the pointer is still installed, and only
clear and drop it from sco_conn_del(), which runs under hdev->lock (its
callers, sco_connect_cfm() and sco_disconn_cfm(), hold it). The reader in
sco_recv_scodata() also takes hdev->lock, so the store and the read are
now serialised: the RX path either observes NULL or a reference that is
guaranteed to stay valid until it drops its own.
sco_conn_add() no longer hands its kref_init() reference to the caller as
the connection's only reference; that initial reference is the one owned
by hcon->sco_data, and callers get their own via sco_conn_hold().
Because the sco_conn can now outlive the socket (the association keeps it
alive until the link goes down), the hci_conn can no longer be dropped
from sco_conn_free() without regressing socket close: closing a connected
SCO socket must still tear the link down. Move hci_conn ownership to the
socket instead: __sco_chan_add() takes an hci_conn reference and it is
released from sco_chan_del() and sco_sock_destruct(), exactly once. The
sco_conn no longer owns an hci_conn reference, so sco_conn_add() stops
consuming one and sco_connect() drops the hci_connect_sco() reference on
every path; sco_connect_cfm() no longer needs its hci_conn_hold() dance. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix use-after-free in dynamic port cleanup
ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic
port from pf->dyn_ports. However, it frees the VSI before reading the
index for the erase, resulting in a use-after-free.
Follow the reverse of the allocation order in ice_alloc_dynamic_port()
by erasing the xarray entry before freeing the VSI. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: reset the vring metadata cache on vring reconfiguration
vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring
metadata region, and iotlb_access_ok() returns early on a cache hit,
taking the hit as proof that the region has already been validated:
if (vhost_vq_meta_fetch(vq, addr, len, type))
return true;
The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on
device IOTLB (re)initialisation and on vq reset, but not when
VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when
VHOST_SET_VRING_NUM changes the region sizes.
With a device IOTLB attached both ioctls are accepted while the vq is
live, and neither validates the addresses at ioctl time: vq_access_ok()
and vq_log_used_access_ok() return true early because the addresses are
GIOVAs, deferring validation to prefetch time. Once the cache has been
populated that deferred validation no longer runs -- vq_meta_prefetch()
hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps
translating through the old mapping as
map->addr + addr - map->start
for an address the mapping no longer covers. vhost_copy_to_user() and
vhost_copy_from_user() consume the result with __copy_to_user() and
__copy_from_user(), which do not check it either, so a subsequent used
ring update or descriptor fetch accesses memory outside the region the
IOTLB actually maps.
Reset the metadata cache whenever the vring is reconfigured, so the new
addresses are pushed back through iotlb_access_ok()'s slow path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| Race condition, use-after-free in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Internally found bugs present in Firefox 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154 and Thunderbird 154. |
| A use after free caused by missing lifecycle management of gesture sprites in GestureBuildSprite() in X.Org X Server before 21.1.25 and XWayland before 24.1.14 could be used by authenticated X clients to crash the X server or potentially execute code. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: prevent unregistering a power supply while a callback runs
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore slip in between the check and the
free. remap_pfn_range() installs writable PTEs for the old buffer's
pages without taking page references, and the subsequent
do_free_pages() returns those pages to the page allocator while the
VMA still maps them. This leaves a stale, writable mapping of freed
pages: a page-level use-after-free that can be leveraged for local
privilege escalation.
Make snd_pcm_mmap_data() participate in the buffer-access scheme
introduced for hw_params/hw_free: acquire runtime->buffer_accessing
before validating and remapping, and release it afterwards. Buffer
reallocation already fails with -EBUSY while accessors are active,
and the mmap side now fails with -EBUSY while a reallocation is in
progress, so the validate/remap sequence and the check/free sequence
can no longer interleave.
A reproducer that turns this race into a stale writable mapping of
the freed DMA buffer pages is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue
A deferred reenqueue can read a freed user DSQ. The request stays on its
CPU's deferred list until run_deferred() takes it, and the RCU callback that
frees the DSQ assumes that the grace period has flushed it, so exit_dsq()
checks the per-CPU node without the deferred list lock. A grace period waits
for readers in flight, not for a pending run_deferred(). A run_deferred()
which starts after the grace period began can detach the request right
before the callback looks and then read the freed DSQ's id.
Cancel the pending requests before the grace period instead. The irq work
that frees the DSQ unlinks every CPU's request under the per-CPU deferred
list lock, and schedule_dsq_reenq() ignores a new request under the same
lock once the id is invalid. Only a run_deferred() that started before the
grace period can hold a request, and it runs with IRQs disabled, so the
grace period waits for it and nothing touches the DSQ after the callback. |
| A use-after-free caused by lack of lifecycle management when adding / removing XInput master devices in X.org X Server before 21.1.25 and XWayland before 24.1.14 could be used by authenticated X Clients to crash the X server or potentially execute code in X server context. |
| A use-after-free in present_clear_window_notifies() in the X.org X Server before 21.1.25 and X Wayland before 24.1.14 could be used by malicious X clients to crash or potentially execute code in the X server context. |
| When Thunderbird asked for a security device password (for example a smartcard PIN or the Primary Password) while decrypting an S/MIME message, the message load could finish or be cancelled while the prompt was open. This freed the message decoder while it was still in use, causing a use-after-free and a potentially exploitable crash. This vulnerability was fixed in Thunderbird 158.0.1 and Thunderbird 153.6. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: Fix use after free in debug code
We're not allowed to dereference "urb" after calling
usb_hcd_giveback_urb() so save the urb->status ahead of time. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh after handling HAO option
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep the domain reference while processing hotplug
We process hotplug events in a workqueue that may run after the domain
has been removed by tb_domain_remove(). For example if user unloads the
driver while at the same time plugging a device router we may have
scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by
taking the domain reference before scheduling the hotplug handler in
tb_queue_hotplug(). |
| Pillow is a Python imaging library. From 11.3.0 until 13.0.0, Pillow has a heap use-after-free when libtiff rejects a tag while encoding TIFF data to an in-memory buffer. When an application saves attacker-influenced TIFF tags to BytesIO, libtiff can reject a tag during encoding in ImagingLibTiffEncode; the error path then frees the output buffer without closing or clearing the TIFF handle, and later cleanup flushes through the write callback into freed memory, which can crash the process and may enable code execution. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential UAF in TTM object purge
TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(),
move casting it to an i915_tt object later to actually get the right
pointer.
A user reported hitting the following bug under heavy use on DG2:
[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI
[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)
[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025
[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915]
[26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78
[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282
[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000
[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff
[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000
[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0
[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0
[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000
[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0
[26620.095612] PKRU: 55555554
[26620.095612] Call Trace:
[26620.095615] <TASK>
[26620.095615] i915_ttm_move+0x2b9/0x420 [i915]
[26620.095642] ? ttm_tt_init+0x65/0x80 [ttm]
[26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915]
[26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm]
[26620.095669] ttm_bo_evict+0x100/0x150 [ttm]
[26620.095671] ? preempt_count_add+0x64/0xa0
[26620.095673] ? _raw_spin_lock+0xe/0x30
[26620.095675] ? _raw_spin_unlock+0xd/0x30
[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915]
[26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm]
[26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm]
[26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm]
[26620.095709] ? init_object+0x62/0xd0
[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm]
[26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915]
[26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915]
[26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095786] ? alloc_debug_processing+0xd0/0x100
[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915]
[26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915]
[26620.095848] i915_vma_pin_ww+0x706/0x980 [i915]
[26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095904] eb_validate_vmas+0x170/0xa00 [i915]
[26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915]
[26620.095953] ? alloc_debug_processing+0xd0/0x100
[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.095977] ? __wake_up_sync_key+0x32/0x50
[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.096001] ? __slab_alloc.isra.0+0x67/0xc0
[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]
Results from decode_stacktrace.sh pointed to dereference of a file pointer
field of a i915 TTM page vector container associated with an object being
purged on eviction. That path is taken when the object is marked as no
longer needed.
Code analysis revealed a possibility of the i915 TTM page vector container
being replaced with a new instance inside a function that purges content
of the object, should it be still busy. That function is called,
indirectly via a more general function that changes the object's placement
and caching policy,
---truncated--- |
