| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`.
int fifo_info_length =
sizeof(struct ec_response_motion_sense_fifo_info) +
sizeof(u16) * sensorhub->sensor_num;
This means the number of read bytes could be less than expected. As a
result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler()
overreads the `resp->fifo_info` buffer.
Check the return value of cros_ec_cmd_xfer_status() and abort if the
number of bytes read does not match the expected length. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: bound SNL TLV parsing to the skb and add length checks
nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length
pair derived from skb->len, without bounding reads to the actual skb
data. Three problems followed:
- For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed.
- The per-TLV header (type, length) was read without checking that two
bytes remained.
- A declared TLV length could run past the end of the buffer, and an
SDREQ with length == 0 made "service_name_len = length - 1" underflow
(size_t), driving an out-of-bounds read in the following strncmp() /
nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3]
without a length check.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Walk the TLV list by pointer, bounded by skb_tail_pointer() over the
linear skb data, and validate each TLV declared length before use. Add
explicit length checks for SDREQ (>= 1) and SDRES (exactly 2).
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib()
ntfs_ir_to_ib copies all entries from index_root into a freshly allocated
index_block_size-byte buffer without verifying that the entries fit in the
available space. The entries in index_root may be larger than the usable
entry space in the index block.
This can cause OOB writes past the end of the allocation.
The validator ntfs_index_root_inconsistent() checks that entries are
self-consistent within the IR value, but never cross-checks them against
index_block_size. There is no bounds check in ntfs_ir_to_ib() before the
memcpy.
Fixing this at the sink in ntfs_ir_to_ib() since
ntfs_index_root_inconsistent() validates the logical consistency of
index_root as a structure and a root with large entries is a structurally
valid root. The bug is a size conflict of ntfs_ir_to_ib().
Also, the validator is called once per inode load in
ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a
reparent, a check there adds no overhead to the common path.
Moreover, even a future call path that bypasses the validator would still
be protected.
With NULL as first parameter of ntfs_error(), the volume error flag is
never set by this call, so the device name will be absent from the error
message. In any case, that the caller, ntfs_ir_reparent(), prints an error
message that includes the device name on NULL returns.
I think this is the best solution available without adding
'struct super_block *sb' as a parameter to ntfs_ir_to_ib().
This heap out-of-bounds write is triggered by a crafted filesystem image,
which is not in the kernel threat model, anyway, fixing memory errors would
be nice to keep things secure. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size
smb_check_perm_dacl() validates that the DACL fits inside the NT
security descriptor, but then bounds its two ACE walks by the
remaining NTSD length (acl_size) rather than the DACL's declared
size (pdacl_size).
When pdacl->size is smaller than the trailing NTSD buffer, bytes
after the declared DACL boundary - still inside the stored security
descriptor - are parsed as ACEs during access checks. A crafted
DACL can place an access-granting ACE beyond pdacl->size, and the
current code accepts it during SMB2_CREATE access validation, while
parse_dacl() and smb_inherit_dacl() stop at pdacl_size.
Bound both ACE walks by pdacl_size to match the DACL boundary
semantics used elsewhere in the server.
Validation:
- semantic KUnit harness shows the post-boundary ACE is selected
before the fix and rejected (EACCES) after it
- linux master (7.2-rc6), x86_64 |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS loader assigns file-controlled wsmp.loop_start and wsmp.loop_length values to samples without calling fluid_sample_validate() or fluid_sample_sanitize_loop(). A crafted DLS file can place sample loop points beyond the sample buffer, causing out-of-bounds reads during audio rendering, undefined behavior, possible memory disclosure, and denial of service. Builds compiled with the CMake option enable-native-dls set to OFF do not expose the affected parser. This issue is fixed in version 2.5.6. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent
memcpy() destination advances by sizeof(full struct) per slot via C
pointer arithmetic, not by the clamped len. When firmware sends short
TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check block offset is not negative
If a negative offset is read off disk (for example the offset into the
decompressed fragment block), this will cause squashfs_copy_data() to
perform an out of bounds access.
Fix by checking if offset is negative, and returning 0. This matches
existing behaviour where an offset beyond the block returns 0 bytes
copied.
To trigger this out of bounds access requires a crafted Squashfs
filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be
able to mount such a filesystem, but once mounted, an unprivileged user
can trigger the out of bounds access by reading the crafted file with the
negative offset. |
| FreeRDP before 3.31.0 contains a buffer over-read vulnerability in the rts_read_result function within the RPC gateway transport parser. Attackers can send a malicious BIND_ACK PDU with a truncated result entry to trigger an out-of-bounds read causing process abort. |
| SIPp through 3.7.7 contains a buffer overflow vulnerability in the get_header() function in src/sip_parser.cpp when processing SIP messages with header content exceeding 20,490 bytes. Unauthenticated remote attackers can send crafted SIP messages with oversized headers to overflow the static buffer and crash the process. |
| zstd-jni before 1.5.7-14 fails to validate the samples buffer capacity in Zstd.trainFromBufferDirect, allowing attackers to read past buffer boundaries by supplying oversized per-sample lengths. Attackers can trigger out-of-bounds memory access by providing crafted sample length arrays that cause the native implementation to walk past the buffer allocation, resulting in JVM termination. |
| Ghostscript before 10.08.0 contains a heap-based buffer overflow vulnerability in the JPEG 2000 output adapter (base/sjpx_openjpeg.c) that allows attackers to cause memory corruption by supplying a crafted PDF containing a JPEG 2000 image with mismatched component subsampling factors. When image components declare different subsampling values, the non-samescale sub-byte-depth output path allocates a row buffer sized for packed output but writes a full byte per output column regardless of bit depth, overflowing the allocation and corrupting internal chunk-allocator metadata to achieve code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. From 1.7.0 until 1.7.4, POST /account-pool/page allows an authenticated caller with MODULE_SETTING_UPDATE to place an arbitrary database function in SortRequest.name because CustomerPoolController.page omits Spring request validation, SortRequest.getName relies on an incomplete blacklist, and the CommonMapper.xml sort fragment inserts ${sortName} into an ORDER BY clause. Functions such as extractvalue and updatexml bypass the blacklist and can expose database values through an error oracle when the query returns at least one row. This issue is fixed in version 1.7.4. |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.2.4 until 2.5.6, configuring synth.midi-channels above 16 allows the MIDI player to index _fluid_player_t::channel_isplaying outside its fixed-size heap allocation while tracking active channels. The resulting out-of-bounds reads and writes invoke undefined behavior and may compromise confidentiality, integrity, or availability. No crafted MIDI file is required because the unsafe condition is created by the channel-count configuration itself. Keeping synth.midi-channels at its default value of 16 avoids the vulnerable path. This issue is fixed in version 2.5.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, HTTP SWF decompression with the non-default swf-decompression feature and an unsafe decompress-depth can use the configured depth when allocating in src/util-file-decompression.c instead of limiting the allocation to the Flash file's actual data requirement. A crafted SWF response can therefore trigger an integer-related heap buffer overflow and crash Suricata; the default disabled feature and default depth are not affected. This issue is fixed in versions 8.0.6 and 7.0.17. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[]
For a user QP, qp->sq.queue is a ring the application writes directly,
so rxe_post_send() takes the is_user branch and only schedules send_task
without validating the WQE. rxe_requester() consumes it in place via
req_next_wqe() and calls copy_data(), which indexes
&wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge.
Only the kernel path bounds num_sge (validate_send_wr()); the user WQE
is never checked, so a local unprivileged user can post a WQE with an
out-of-range cur_sge or oversized num_sge and force an out-of-bounds
read of the per-WQE sge array in copy_data() (vmalloc OOB read, local
DoS).
Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way
get_srq_wqe() already guards SRQ entries, and bound cur_sge only when
the WQE carries payload (dma.resid): copy_data() returns early on a
zero-length copy before touching dma->sge[], so a zero-payload WQE --
the only kind a max_sge == 0 QP can post -- stays valid.
Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Get Feature count larger than the output buffer
cxlctl_get_feature() sizes its output buffer from the user's
fwctl_rpc.out_len, but the device is told to write
cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a
separate user-controlled value. Nothing bounds count against out_len, so
a small out_len with a large count overflows the kvzalloc()'d buffer.
A heap OOB write reachable from FWCTL_RPC.
Reject requests where count exceeds the available payload room, before
allocating. |
| On affected platforms running Arista EOS with IGMP (Internet Group Management Protocol) snooping configured (enabled by default on all VLANs), a network-adjacent unauthenticated attacker can send malformed network packets on an affected VLAN to cause the IGMP snooping agent to terminate unexpectedly. This results in a temporary disruption of multicast traffic management, which may cause multicast traffic to be flooded to all ports of the affected VLAN until the service recovers. Repeated exploitation could result in a prolonged loss of intended multicast forwarding behavior. |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions before 1.2412b260707 and 2.2412b260519 contain a stack-based buffer overflow in the web server. Insufficient bounds checking on data copied into a stack buffer allows a remote authenticated attacker to cause a denial of service or potentially execute arbitrary code on the underlying operating system. |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions bfore 1.2412b260707 and 2.2412b260519 contain a stack-based buffer overflow in the web server. Insufficient bounds checking on data copied into a stack buffer allows a remote administrator to cause a denial of service or potentially execute arbitrary code on the underlying operating system. |
