| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in acm-operator-bundle. The build process for this component downloads and runs a script from a remote source without verifying its authenticity or integrity. This script gains access to sensitive credentials, such as GitHub access tokens and registry passwords, used in the build environment. A remote attacker could exploit this vulnerability to inject malicious code, leading to unauthorized access to build resources and potential compromise of the resulting operator bundle. |
| Download of code without integrity check, inclusion of functionality from untrusted control sphere, and cleartext
transmission of sensitive information vulnerability in Ozols Grupa OZOLS
on Windows caused by an abandoned auto-update domain. Affected
component: the automatic update channel - OzolsSQL client update path, the <db>_update SQL Server Agent job (@subsystem = N'ActiveScripting') and serv_update.vbs.
This issue affects OZOLS: before 1.1.1233. |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. |
| Tor before 0.4.9.10 did not reject a CONFLUX_LINK cell that arrives on a circuit which already has attached streams. A malicious client could send a RELAY_COMMAND_BEGIN before the CONFLUX_LINK on the same circuit, attaching an exit stream that would later end up orphan leaving a dangling circuit back-pointer and a use-after-free (UAF) when the circuit is freed. This is TROVE-2026-025. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to improper validation of an attacker-controlled pointer. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 has a pointer validation flaw exists in the AIX Virtual SCSI (vSCSI) initiator driver. Successful exploitation may result in denial of service, privilege escalation, or full compromise of the client LPAR kernel. |
| Use after free in DOM in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| It was possible to execute a ReDoS-type attack inside CKEditor 4 before 4.16 by persuading a victim to paste crafted text into the Styles input of specific dialogs (in the Advanced Tab for Dialogs plugin). |
| It was possible to execute a ReDoS-type attack inside CKEditor 4 before 4.16 by persuading a victim to paste crafted URL-like text into the editor, and then press Enter or Space (in the Autolink plugin). |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort() directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping only its internal HT header parser in error handling while leaving the later codestream read and construction calls unprotected. This issue has been resolved in version 3.4.13. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: clear new_transport when removing a peer
sctp_process_asconf_param() stores a newly added peer transport in
asoc->new_transport. After all parameters in the ASCONF chunk have been
processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the
new transport.
An authenticated ASCONF from a remote SCTP peer can add a transport and
remove it again with a wildcard DEL-IP parameter in the same chunk. The
wildcard deletion preserves the transport on which the ASCONF arrived, but
removes the newly added transport through
sctp_assoc_del_nonprimary_peers(). The removal does not clear
asoc->new_transport, leaving it pointing to the removed transport.
sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points
to the removed transport without holding a transport reference. During
local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on
control_chunk_list. After the transport is freed by RCU, a successful
ASCONF_ACK for the replacement address releases the queued HEARTBEAT and
sctp_outq_select_transport() reads the freed transport's state.
The issue was found during a static audit of SCTP objects. With an
authenticated peer, the reproducer triggered the same KASAN report in 2
of 2 unpatched runs on a KASAN-enabled netdev/main kernel:
BUG: KASAN: slab-use-after-free in sctp_outq_select_transport
Read of size 4 at addr ffff88800b9bd95c by task python3/197
Call Trace:
sctp_outq_select_transport+0x549/0x8b0 [sctp]
sctp_outq_flush+0x306/0x2c60 [sctp]
sctp_transport_immediate_rtx+0xaf/0x260 [sctp]
sctp_process_asconf_ack+0xa48/0xf70 [sctp]
Allocated by task 197:
sctp_transport_new+0x68/0x650 [sctp]
sctp_assoc_add_peer+0x258/0x12a0 [sctp]
sctp_process_asconf+0x5e9/0x1090 [sctp]
Last potentially related work creation:
__call_rcu_common.constprop.0+0x77/0xb70
sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp]
sctp_process_asconf+0xd9c/0x1090 [sctp]
The first invalid access was a four-byte read of transport->state at
net/sctp/outqueue.c:833. The same reproducer completed the full
authenticated ASCONF and local-address replacement sequence with this
change without a KASAN report or oops.
Clear new_transport when its peer is removed, before it can be used to
create the HEARTBEAT. |
| In the Linux kernel, the following vulnerability has been resolved:
rqspinlock: Reset tail when preserving queue on deadlock
Currently, the destruction of the waiter queue is suppressed for
rqspinlock in cases where a deadlock is detected. Deadlock checks happen
relatively frequently (on entry for AA, within 1ms for ABBA), and waiter
threads may not be involved in locking scenarios involving deadlocks.
Thus, it is useful to not flush the queue and let other waiters take a
stab at acquiring the lock after we detect a deadlock and exit.
However, we need to follow the same logic as what we did previously for
the waitq_timeout label: reset the tail, and if we cannot, signal the
next waiter appropriately. In case of deadlocks, this signal would just
mark the MCS node as unlocked, and in case of timeouts, it would signal
RES_TIMEOUT_VAL. The difference thus is in the value propagated, which
decides whether the queue remains active or gets flushed.
Not doing the tail reset, and waiting for the next waiter can lead to
cases where we are the final waiter, and thus no next waiter arrives,
leading to intermittent stalls in this path. Once the next waiter does
join, we will be unblocked. In the theoretical case when the next waiter
never joins, we risk stalling indefinitely.
This can only happen for ABBA deadlocks, since entry into the wait queue
is guarded with AA checks. A precise sequence of executions leading up
to this scenario can be:
CPU 0 holds lock A.
CPU 1 holds lock B.
CPU 2 attempts lock B, becomes the pending waiter for B.
CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues.
CPU 1 attempts lock A.
CPU 0 detects an ABBA deadlock.
Once deadlock detection happens for CPU 0, it will sit waiting for the
next waiter in the queue to populate node->next, which will experience
delays until such a waiter arrives.
Fix this by adjusting the logic for the check for deadlocks preceding
the waitq_timeout label. It would make sense to consolidate code for
both cases and use 'ret' to distinguish the value being propagated, but
that is left as an exercise for a future refactoring task to avoid diff
noise in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free in cifs_try_adding_channels()
cifs_try_adding_channels() takes a temporary reference to an interface
before dropping iface_lock. If cifs_ses_add_channel() fails, it drops
that reference and then increments iface->weight_fulfilled.
A concurrent interface list refresh can remove the list reference while
channel creation is in progress. In that case, the failure-path
kref_put() releases the last reference and frees iface. Updating
weight_fulfilled afterward then accesses freed memory.
Increment weight_fulfilled before dropping the temporary reference,
keeping iface alive for the final access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent in6_dev_get() from resurrecting inet6_dev
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer state for commuted arithmetic
When scalar += pointer is handled in adjust_ptr_min_max_vals(), the
destination register inherits the pointer state from the source pointer.
Copying only selected fields is fragile because pointer provenance is
tracked by several bpf_reg_state fields.
Use the caller's temporary offset register to preserve the scalar operand
while replacing the destination with the full pointer state. This preserves
the frame number for PTR_TO_STACK registers and keeps parent identity
fields consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable
freeing", v6.
Kernel page table walkers fall into two broad categories - those ranges
where no exclusion is required via walk_kernel_page_table_range_lockless()
and those where exclusion is required via walk_kernel_page_table_range()
or walk_page_range_debug().
The former category is used only by arm64 arch code operating on ranges it
both wholly owns and does not concurrently write.
The latter category consists of kernel page table walkers operating on
ranges that are wholly owned (but which need exclusion against concurrent
writers).
The lock used for exclusion is the mmap lock, and for kernel ranges this
is the mmap lock on init_mm.
ptdump is a special case being both the only user of
walk_page_range_debug(), and the only case in which it walks ranges it
does not own.
This presents a problem, as page tables may be freed under ptdump. And
indeed there is a use-after-free bug in the kernel as a result, which this
series addresses.
vmap promotes page tables to huge leaf entries where possible, freeing the
lower page table when it does. It does this with no meaningful locks held
against concurrent ptdump walks.
As a result, use-after-free can currently occur. This series addresses
the issue by having the vmap huge promotion logic acquire the mmap read
lock while both setting the huge page table entry and freeing the prior
leaf page table.
The ptdump code already acquires the mmap write lock, so by doing so we
ensure that the ptdump walker only ever observes either the huge page
table entry or the existing page table entry, and nothing is freed
underneath it.
A mitigation for this issue was already applied for arm64 in commit
fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series
has to deal with carefully.
This mitigation resolves the issue by acquiring the mmap read lock on
init_mm on vmap page table free if a ptdump is in progress.
However the fix in this series would cause a deadlock if we were to simply
apply it for arm64 without also reverting the change.
This is because vmap may acquire the read lock before ptdump attempts to
acquire the write lock, which then gets queued, and rwsem starvation rules
mean that the (unacknowledged) nested mmap read lock in the arm64 code
would also block, meaning the original read lock is never released and
thus deadlock.
This series works around this by #ifndef CONFIG_ARM64'ing the mmap read
lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64:
Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap
support, and removing the ifdeffery with the partial revert patch.
There are related issues that are also addressed in this series:
* x86 page attribute logic, specifically Change Page Attributes (CPA),
implements a feature whereby huge ranges can be collapsed into huge leaf
entries. This can similarly cause a UAF when done in parallel with a
ptdump walk, so similarly acquire the init_mm mmap lock to avoid this.
* The CPA logic allows concurrent page table manipulation and CPA
collapse, meaning the former risks accessing a page table the latter
frees. Fix this by acquiring mmap write lock on init_mm across the
whole CPA collapse operation and read lock on the page table
manipulation.
* x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm
walks, and in x86's case arbitrary mm's), so we ensure kernel mappings
remain stable by locking the init_mm as well as the mm being walked.
The ordering of patches is established for both strict dependencies (the
arm64 partial revert in particular has to be done after the vmap changes)
and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA
fixes are in place).
This patch (of 3):
Currently there is a nasty ra
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: clear control chunk transport if it is being removed
sctp_make_heartbeat_ack() caches the destination transport in
chunk->transport without taking a reference. When src_out_of_asoc_ok is
enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead
of being transmitted immediately.
If the peer transport is removed while the chunk is still queued,
sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing,
but only clears cached transport pointers in out_chunk_list. The queued
control chunk therefore retains a dangling transport pointer.
Once an ASCONF_ACK clears the suppression and the queued control chunk is
transmitted, SCTP dereferences the stale transport pointer, leading to a
use-after-free.
Fix this by also clearing chunk->transport for queued control chunks in
control_chunk_list when removing the transport. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: fix potential use-after-free in tunnel segmentation
__skb_udp_tunnel_segment() gets the UDP header before ensuring the
tunnel header is in the skb head. If the pull reallocates skb->head,
the saved UDP header pointer is no longer valid.
Get the UDP header after the pull to avoid a potential use-after-free. |
