| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix use-after-free of the flow table mask array
tbl_mask_array_realloc() retires the old mask_array before it stops being
reachable:
old = ovsl_dereference(tbl->mask_array);
if (old) {
...
call_rcu(&old->rcu, mask_array_rcu_cb);
}
rcu_assign_pointer(tbl->mask_array, new);
call_rcu() only waits for read-side critical sections already in flight.
tbl->mask_array still points at old between the call_rcu() and the
rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in
that window picks up old in a fresh critical section that the pending
grace period does not cover.
tbl_mask_array_realloc() runs in process context under ovs_mutex, so the
window is preemptible and can outlast the grace period. Then
mask_array_rcu_cb() frees old before the swap runs:
BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0
Read of size 8 at addr ffff888020b3e018 by task poc/741
flow_lookup.constprop.0+0x2bf/0x2f0
ovs_flow_tbl_lookup_stats+0x4a3/0x5c0
ovs_dp_process_packet+0x19c/0x710
ovs_vport_receive+0x243/0x390
internal_dev_xmit+0x81/0x170
Freed by task 728:
kfree+0x16a/0x4e0
rcu_core+0x853/0x1030
Publish the new array before retiring the old one. The kfree_rcu() that
call_rcu() replaced ran after the swap. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_brcm: legacy FCS: request needed tailroom
The legacy FCS tagger calculates the CRC over skb->len bytes starting at
skb->data. When a nonlinear skb reaches the tagger, this reads past the
linear head into unrelated slab memory.
The tagger appends an Ethernet FCS but does not declare that tailroom. As a
result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user
port, and nonlinear skbs can reach the CRC calculation.
Declare the required tailroom. DSA will then clear those features and the
networking core will linearize skbs before the tagger runs.
A KASAN-enabled dsa_loop test using this tagger reports:
BUG: KASAN: slab-out-of-bounds in crc32_le
Read of size 1 at addr ffff8880397086c0 by task exp/135
Call Trace:
crc32_le (lib/crc/crc32-main.c:38)
brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343)
dsa_user_xmit (net/dsa/user.c:942)
dev_hard_start_xmit (net/core/dev.c:3937)
__dev_queue_xmit (net/core/dev.c:4926)
packet_sendmsg (net/packet/af_packet.c:3110)
__sys_sendto (net/socket.c:2281)
The buggy address belongs to the object at ffff888039708400
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ffff888039708400, ffff8880397086c0) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release all action references on NEWACTION failure
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: don't overconsume buffers when using MSG_TRUNC
When a recv/recvmsg is issued with MSG_TRUNC and the incoming packet is
larger than the provided buffer, the net layer returns the full length
of the packet rather than the number of bytes actually copied into the
buffer. As a result, io_uring advances more of the provided buffer ring
than was actually filled. Use the actual filled region size to consume
the buffer, but still return the full size to preserve MSG_TRUNC
semantics.
Take care with multishot, because that seems to already truncate the
consumption based on the available payload size.
This was reported in https://github.com/axboe/liburing/issues/1619.
[axboe: fold in size_t unsigned fix] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to
flush the L2/HDC data cache before fence signalling, but it never
requests a flush of the LSC untyped L1 data cache via the 'Untyped
Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11].
Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to
also flush/invalidate the untyped L1 cache, but only depending on how
HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling
between HDC Pipeline Flush and the untyped L1 cache flush no longer
holds in practice, regardless of how HDC_CHICKEN0 is programmed, so
relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan
driver (anv) has been assuming the kernel flushes both caches between
submissions, and hit user-visible corruption in apps such as Llama.cpp
because of this gap; it now works around it by flushing both caches
again from userspace at the end of every command buffer.
Correctness between submissions on the same queue is userspace's
responsibility and belongs in Mesa, not the kernel. However, for
security we must ensure stale data can't leak through the untyped L1
dataport cache once memory is reclaimed or evicted, which requires the
KMD to flush it before releasing memory for reuse.
Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for
DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline
Flush coupled to the untyped L1 cache flush, so those platforms are
unaffected. Mesa's own anv driver found that on MTL the HW
disconnected the two independently of how HDC_CHICKEN0 is programmed,
and could not bring the old behavior back even by writing the register
by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped
cache flush in 3D mode"). The kernel can't reliably request the flush
from the CS on MTL either, so restrict the new PIPE_CONTROL bit to
GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on.
Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together
with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on
Xe2 and later, so the L1 data cache is known clean before memory is
released for reuse, without depending on undocumented
platform-specific HDC_CHICKEN0 behavior.
Bspec: 56551
(cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix memory leak in query_perf_config_list()
When krealloc() fails, free the original oa_config_ids before returning
to avoid a memory leak.
(cherry picked from commit 9977e9d84f46d4f12ad35fbbc0ec4638554bce87) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Don't read the U65 rounding mode as a storage mode
Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage
mode on U85 only. On U65 the same field holds the rounding mode, and the
command stream parser has read it as a storage mode since the driver was
added.
That went unnoticed while unknown values fell through the switch, but
now that they are rejected, every U65 command stream that asks for
natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits
it for average pooling, concatenation, split, unpack, strided slice, LUT
and argmax, which is 72 failures of the Teflon test suite on an i.MX93.
Truncating rounding (1) is misread as well: it picks the two-tile
address path and computes a bogus feature map size from tile bases the
command stream never set.
Read the field as a storage mode only on the hardware where it is one. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
struct amdxdna_cmd_chain contains a flexible array annotated with
__counted_by(command_count). Since the structure is stored in shared
AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently.
If command_count is changed to zero, the bounds check generated from
__counted_by may fail and trigger a kernel panic.
Remove __counted_by to avoid relying on the userspace-controlled
command_count for the flexible array bounds check. |
| A security flaw has been discovered in Open-Web-Analytics up to 1.8.1. Affected is the function Event::loadFromArray of the file queue.php of the component Remote Event Queue Endpoint. Performing a manipulation results in deserialization. The attack can be initiated remotely. Upgrading to version 1.8.2 is able to address this issue. The patch is named 78c1222ec0e2119d84684032da1541120a2cdd23. The affected component should be upgraded. |
| The AIL Framework's username timeline feature is vulnerable to stored cross-site scripting (XSS). Usernames imported from chats and crawled forums are stored without character restrictions. When an authenticated analyst views the username timeline, the application renders these stored usernames into the DOM using D3's html() method in the tooltip. Because the username value (d.obj) is interpolated directly into an HTML string without sanitization, a crafted username containing HTML event handlers (e.g., <img src=x onerror=alert(1)>) will execute arbitrary JavaScript in the analyst's browser when the analyst hovers over the corresponding timeline entry. The attack requires the victim to be an authenticated analyst with access to the timeline view and to interact with the malicious timeline entry (hover). Successful exploitation can lead to session hijacking, data exfiltration, or unauthorized actions performed within the analyst's authenticated session. The vulnerability resides in the client-side JavaScript file var/www/static/js/d3/timeline_basic.js. |
| Out-of-bounds Write in the natural width branch of the text sizing protocol in kitty from 0.40.0 before 0.49.0 allows a program writing to the terminal to write past the end of a fixed-size buffer, because screen_handle_multicell_command() in kitty/screen.c appends each codepoint of a grapheme cluster with lc.chars[lc.count++] = ch without any capacity check, while lc is declared by the RAII_ListOfChars macro as a four-element char_type array in the function's stack frame, so an OSC 66 escape code whose payload carries a grapheme cluster longer than four codepoints writes beyond that buffer, one 32-bit value per additional codepoint, in the order the codepoints appear. Where the cluster is preceded in the same payload by a sequence that causes an intermediate flush, the buffer is first migrated to the heap by ensure_space_for_chars() and the write occurs past the heap allocation instead. This results in termination of the kitty process and therefore of all its windows, tabs and child processes. |
| The AIL Framework tag selector component (var/www/static/js/tags.js) is vulnerable to stored cross-site scripting (XSS). A user with the ability to create a custom tag could embed an HTML payload containing JavaScript event handlers (e.g., <img src=x onerror=alert(1)> or <svg onload=...>) in the tag name. When another authenticated user opened a page containing the tag selector, the malicious tag name was inserted into the DOM using jQuery's html property, causing the embedded script to execute in the victim's browser context.
The vulnerable code paths affected both the suggestion/combo-item rendering (_renderComboItems) and the selected-tag rendering logic. In both cases, the display value derived from the tag's displayField was passed directly to the html property of a jQuery element constructor, which parses and inserts the string as raw HTML rather than as text.
Preconditions: the attacker must have an authenticated account with permission to create custom tags, and the victim must be an authenticated user who views a page that renders the tag selector with the attacker's stored tag. The attack is stored (persistent) and does not require the victim to perform any action beyond loading the page.
Security impact: successful exploitation allows arbitrary JavaScript execution in the victim's browser within the application's origin, potentially leading to session hijacking, unauthorized data access, form manipulation, or further client-side attacks. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in dashbitco lazy_html allows mutation XSS via a parse and serialize round-trip of attacker-supplied HTML.
LazyHTML.to_html/2 and LazyHTML.Tree.to_html/2 decide whether to escape an element's text from its tag name alone. A style or script element inside SVG or MathML foreign content is parsed with character references decoded, but is serialized as an HTML raw-text element, so its text is emitted unescaped. Encoded markup such as </style><img src=x onerror=...> inside <svg><style> therefore closes the element on re-parse and becomes live markup. Applications that parse untrusted HTML with lazy_html, filter the document or tree, and serialize it for display are affected, since the payload is a plain text node that no element or attribute filter sees.
This issue affects lazy_html: from 0.1.0 before 0.1.13. |
| Insecure Direct Object Reference / missing object-level authorization in the Akia keyless entry cloud service. The unlock action is relying on a client-supplied room/door identifier that is not properly authorized server-side against the authenticated guest's booking. An authenticated guest could unlock rooms other than their own, resulting in unauthorized physical access to guest rooms at an affected property.
As of 19th September 2026 the service is no more vulnerable to this attack (feedback received by the reporter).
The attack is remote but the effect is local to an affected property. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
| A flaw was found in rpm. An attacker can supply a crafted manifest file that, when processed by a user or automation using `rpm -q -p` or similar manifest-processing flows, leads to arbitrary code execution. This occurs because manifest entries are unexpectedly macro-expanded before being opened, allowing embedded shell commands to run with the privileges of the `rpm` process. Successful exploitation can lead to a full compromise of confidentiality, integrity, and availability for the affected account. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: flush pending RCU callbacks on module unload
Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks
before freeing module text, preventing late callback execution in freed memory.
BUG: unable to handle page fault for address: ffffffffc1d59c40
PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0
Oops: 0010 [#1] SMP NOPTI
RIP: 0010:0xffffffffc1d59c40
Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16.
RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286
RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590
RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290
RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700
R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? rcu_do_batch+0x163/0x450
? rcu_core+0x177/0x1c0
? __do_softirq+0xc1/0x280
? asm_call_irq_on_stack+0xf/0x20
</IRQ>
? do_softirq_own_stack+0x37/0x50
? irq_exit_rcu+0xc4/0x100
? sysvec_apic_timer_interrupt+0x36/0x80
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? cpuidle_enter_state+0xd4/0x360
? cpuidle_enter+0x29/0x40
? cpuidle_idle_call+0x108/0x1a0
? do_idle+0x77/0xf0
? cpu_startup_entry+0x19/0x20
? secondary_startup_64_no_verify+0xbf/0xcb
(cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
