| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Reject oversized TX buffers
ntb_process_tx() handles an oversized buffer by calling tx_handler()
with a NULL data pointer and returning success. ntb_netdev therefore
neither frees the skb in its completion callback nor takes its enqueue
error path, leaking it.
Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring
a queue entry and return -EMSGSIZE. The caller retains ownership of the
buffer, and the preceding netdev patch frees the skb when enqueue
returns this permanent error. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free in smc_rx_pipe_buf_release()
smc_rx_splice() hands RMB pages to a pipe and takes a socket reference
per entry so the smc_sock stays alive until the reader finishes. The
connection does not: a concurrent close runs smc_conn_free(), which
releases the receive buffer back to the link group pool.
smc_rx_pipe_buf_release() tests sk_state before taking the socket lock.
The state can change between the test and the lock, and
smc_rx_update_cons() then dereferences conn->rmb_desc and walks
conn->lgr, which smc_conn_free() has already released. On the
is_reg_err path smcr_buf_unuse() frees the descriptor outright, so
this is a use-after-free.
Take the socket lock first and test conn->freed instead.
smc_conn_free() sets that flag before releasing anything, and every
caller holds the socket lock. The two paths exclude each other: either
the pipe release runs first with everything valid, or it sees the flag
and skips the update. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: unregister the connection before draining the rx tasklet
smc_conn_free() calls smc_ism_unset_conn() only while the link group is
still on its device list, and never sets conn->killed.
smc_lgr_terminate_sched() unlinks the group immediately and defers killing
its connections to a work item, so a connection freed in that window keeps
its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the
device can re-arm the receive tasklet after tasklet_kill() has returned. On
the DMB-nocopy path the ghost send buffer is freed right after that drain,
so the re-armed tasklet dereferences it.
Unregister unconditionally and drain before the detach at both teardown
sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain.
Clear conn->sndbuf_desc before freeing it as well, so a reader that samples
the pointer cannot get one that is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cap advertised IP tunnel headroom
IP tunnel devices derive their advertised needed_headroom from lower
output devices. A stack of user-created devices can make the derived
value larger than the 16-bit skb header offsets can represent. Once IP
output reserves it, skb head expansion can wrap those offsets.
The runtime transmit path already caps a growing needed_headroom at 512.
Apply the same cap when tunnel configuration publishes needed_headroom
derived from a lower output device.
Capping the advertised value is safe: IP tunnel transmit still expands
the skb when a packet needs more headroom. A nonsensical stacked
configuration can therefore incur an extra reallocation, but it cannot
publish an unbounded reservation to upper layers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't touch shared zerocopy state in skb_tx_error()
skb_tx_error() completes the zerocopy uarg and clears
SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears
SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone
shares, while the caller only owns the reference it is about to drop.
Through a clone it tells the producer its pages are free and drops
SKBFL_SHARED_FRAG for an skb that is still in flight.
Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC:
clone_execute() sends a skb_clone() into ovs_dp_process_packet() while
do_execute_actions() keeps forwarding the original, and skb_clone()
does not privatise the frags here -- skb_orphan_frags() returns early
on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker
from the packet still being forwarded, and a later local ESP delivery
decrypts in place over frags it does not own privately.
Skip it for a cloned skb. Nothing is lost: skb_release_data() clears
the zerocopy state once the last reference to the shared data goes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: clear the URB pointers on disconnect
bcd2000_free_usb_related_resources() frees both URBs and leaves the
pointers behind:
usb_kill_urb(bcd2k->midi_out_urb);
usb_kill_urb(bcd2k->midi_in_urb);
usb_free_urb(bcd2k->midi_out_urb);
usb_free_urb(bcd2k->midi_in_urb);
The rawmidi device outlives that call. A substream that is still open
when the device is unplugged reaches bcd2000_midi_send() from the
trigger path on close. That function writes to the freed URB and then
hands it to the USB core:
bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE;
...
ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC);
usb_kill_urb() does not stop a later submission either, so a submit that
races the disconnect can requeue the URB after it has been reaped.
midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits
it from the completion handler.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000]
Write of size 4 at addr ffff00001827d388 by task bpoc/168
__asan_store4
bcd2000_midi_send [snd_bcd2000]
bcd2000_midi_output_trigger [snd_bcd2000]
snd_rawmidi_kernel_write1
close_substream.part.0
Freed by task 168:
usb_free_urb
bcd2000_disconnect [snd_bcd2000]
BUG: KASAN: slab-use-after-free in usb_submit_urb
Read of size 8 at addr ffff00001827d3b8 by task bpoc/168
Clear both pointers after freeing and test them on the paths that can
still run. Poison the URBs before freeing them: usb_poison_urb() waits
for a running completion handler and rejects any later submission, so
after it returns the input path is quiesced and only the rawmidi trigger
path can still reach bcd2000_midi_send(). No unpoison is needed; the
URBs are freed on the next line.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcxhr: initialize mutexes before requesting threaded IRQ
pcxhr_probe() requests pcxhr_threaded_irq() before initializing
mgr->lock, even though the threaded handler takes that mutex.
Initialize the manager locks before request_threaded_irq() so an
early interrupt cannot run against uninitialized mutex state during
probe. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix info leak and UAF in device unregister path
i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before
calling device_unregister(). During device_unregister(),
device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while
the device descriptor is still expected to be valid. As a result,
i3c_device_uevent() and a racing modalias_show() can observe a NULL
desc and fall back to an uninitialized stack struct i3c_device_info,
leaking kernel stack contents in the generated modalias. Driver
.remove() callbacks may also encounter an unexpected NULL desc during
unbind.
Keep desc valid until device_unregister() has completed. Since
device_unregister() drops the device reference and may free the device,
take an extra reference with get_device() before unregistering. Clear
desc afterwards and release the extra reference with put_device().
This preserves the release-time invariant that desc must be NULL while
avoiding both the information leak and a potential use-after-free from
writing desc after the device has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Detach sync cmd buffer on interrupted wait
mwifiex synchronous commands keep the caller-provided data buffer in
cmd_node->data_buf. Several callers pass stack-allocated objects there.
If wait_event_interruptible_timeout() is interrupted, the caller can
return and release that stack object while the firmware command is still
the current command. A late firmware response then reaches the normal
response handler, which can copy data through cmd_node->data_buf into the
stale stack address.
This fixes a stack corruption observed during repeated association and
disassociation cycles. The panic trace showed the command wait being
interrupted immediately before a bad pointer dereference:
cmd_wait_q terminated: -512
Unable to handle kernel paging request at virtual address 002c583837384662
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted
...
Tainted: [M]=MACHINE_CHECK
The fault address decodes as little-endian ASCII:
0x002c583837384662 -> "bF878X,\0"
which is a fragment of the VERSION_EXT firmware string exposed as
debugfs "verext":
w8997o-V4, RF878X, FP92, 16.92.21.p153.7
The same runs also showed corrupted control data containing:
0x2400372e333531 -> "153.7\0$"
which is the tail of the same VERSION_EXT string. This points at a late
VERSION_EXT response writing through a stale stack-backed data_buf after
the interrupted wait returned.
After cancelling pending commands on an interrupted or timed-out wait,
detach the caller-owned data buffer from the still-current command. This
preserves the existing command cancellation behaviour while preventing a
late response from writing through a pointer whose lifetime ended with the
waiting caller.
Tested on an i.MX8MP board using an 88W8997. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy
mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block
copy from the address reported by the MCU response (event->addr, a
device-controlled __le32) and clamps only the copy length, never the
destination offset into dev->mt76.eeprom.data. A malicious or
malfunctioning device can report an arbitrary address and drive an
out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past
eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: validate default EEPROM firmware size
The default EEPROM firmware is parsed and copied as a full EEPROM
without checking its length. A truncated file can make the driver
read beyond the firmware buffer during variant validation or the
fallback copy.
Reject files shorter than MT7996_EEPROM_SIZE before parsing or
copying the firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: flush works in dependency order
virtio_vsock_remove() stops the virtqueues and then flushes each work
item before freeing the enclosing virtio_vsock. The current order does
not account for dependencies between those items: tx_work may queue
send_pkt_work, and send_pkt_work may queue rx_work.
In particular, send_pkt_work can set restart_rx and release tx_lock.
The remove path can then stop the queues and flush rx_work before
send_pkt_work queues it. Although the later send_pkt_work flush waits
for that producer to finish, nothing waits for the newly queued rx_work,
so kfree(vsock) can race with it.
KASAN reported:
BUG: KASAN: slab-use-after-free in
virtio_transport_rx_work+0x487/0x4b0
Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtio_transport_rx_work+0x487/0x4b0
process_one_work+0x688/0x1120
worker_thread+0x45b/0xd10
Allocated by task 1:
virtio_vsock_probe+0xef/0x6b0
Freed by task 84:
kfree+0x131/0x3c0
virtio_vsock_remove+0xd1/0x100
Flush the works in producer-to-consumer order. virtio_vsock_vqs_del()
has already disabled the queue callbacks and cleared the run flags, so
after tx_work and send_pkt_work are drained, no source remains that can
queue rx_work after its flush. |
| In the Linux kernel, the following vulnerability has been resolved:
w1: ds28e17: reject an oversize length on an I2C block read
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.
Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: fix cred UAF in smack_file_send_sigiotask()
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials here.
I have tested that this bug can lead to a KASAN-reported UAF of struct cred
in smack_file_send_sigiotask(), and that this fix prevents the race. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
iso_conn_ready() looks up the BIS listener socket with iso_get_sock(),
which takes a reference, and then, without re-checking its state,
creates a child socket from it:
parent = iso_get_sock(hdev, ...);
if (!parent)
return;
lock_sock(parent);
sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...);
...
iso_chan_add(conn, sk, parent);
...
release_sock(parent);
sock_put(parent);
If the listener socket is closed concurrently, between iso_get_sock()
and lock_sock(), the reference taken by iso_get_sock() may be the last
one: the close path drops the link-list reference, and once
iso_conn_ready() drops its own reference at the end of the function the
socket is freed. The child socket, however, is already linked to the
freed parent, and a later disconnect of the child runs iso_chan_del()
-> bt_accept_unlink(), which dereferences the dangling parent pointer
into the freed accept queue (a use-after-free). The same dangling
pointer is also dereferenced through parent->***() in
iso_chan_del().
Fix it the same way the connected (non-BIS) path was fixed in commit
0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"):
after taking the socket lock, re-check that the parent is still a
listening, alive socket, and bail out otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe
get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue
buffer, which is mapped into userspace. It validates num_sge against
max_sge, but then re-reads the same field to calculate the memcpy
size. A concurrent userspace thread can modify num_sge between
validation and use, causing a heap buffer overflow when copying the
WQE into qp->resp.srq_wqe.
Read num_sge into a local variable and use it for both the bounds
check and the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
