| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix use-after-free of sdata via queued RX frames
The RX softirq producer ieee802154_subif_frame() queues received beacon
and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and
schedules a process-context worker, storing a raw mac_pkt->sdata (and
skb->dev == sdata->dev) with neither a reference nor any locking:
- the lists have no lock: the softirq producer list_add_tail()s while the
mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt
the list;
- the workers dereference the interface after it may have been freed.
mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and
mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences
skb->dev (== sdata->dev). Removing an interface frees its sdata
(netdev_priv) while a queued frame still points at it, so a later worker
run is a use-after-free.
Reproduced under KASAN by flooding a victim interface with MAC command
frames and removing it (the beacon path is the same class via skb->dev):
BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31
Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154]
Call Trace:
mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
process_one_work+0x611/0xe80
worker_thread+0x52e/0xdc0
kthread+0x30c/0x630
ret_from_fork+0x2fd/0x3e0
Fix both lists together:
- add local->rx_lock and take it around every list access: the softirq
producer (plain spin_lock, softirq context) and the workers and flush
(spin_lock_bh, process context);
- pin the interface for the lifetime of a queued frame with
netdev_hold()/netdev_put(), so the worker can safely dereference sdata /
skb->dev even while the interface is being removed;
- dequeue under the lock at the head and loop-drain the whole list in the
workers (they previously processed one frame per run and relied on a
later enqueue to drain the rest);
- drop not-yet-started frames of an interface before it is unregistered,
from ieee802154_if_remove() (after the RCU grace period) and from the
ieee802154_remove_interfaces() loop -- the latter is the whole-phy
teardown path, which does not go through ieee802154_if_remove().
An in-flight worker that already dequeued a frame keeps its own netdev
reference; unregister_netdevice() then waits it out in netdev_run_todo(),
which runs at rtnl_unlock() (rtnl released) and after the interface has
been closed, so it does not pin rtnl. A worker blocked in an association
TX only delays that one interface's unregister (the usual "waiting for %s
to become free"), it does not hold rtnl. netdev_hold() is used for this
reason instead of a cancel_work_sync() under rtnl, which would block on
the worker's unbounded MLME TX wait via ieee802154_sync_queue().
The mac-command worker additionally skips processing for a stopped
interface (ieee802154_sdata_running()), avoiding a needless association
response during teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix use-after-free of the source's parent directory
current_check_refer_path() reads old_dentry->d_parent without holding a
reference nor a lock on it, and then dereferences it in
collect_domain_accesses() and in the audit record.
A reference on a child does not pin its parent: __d_move() reassigns
dentry->d_parent and drops the reference the child held on its former
parent. hook_path_rename() is not affected because the rename path
calls lock_rename() before the hook, so the source cannot be reparented
under it. hook_path_link() has no such protection: filename_linkat()
holds a reference on the source dentry but neither locks nor references
its parent, so a concurrent rename(2) can reparent the source while
security_path_link() runs, and the former parent can then be removed and
freed while the hook walks it.
A process can trigger this after entering a Landlock domain that handles
at least one filesystem access right. The process can then race a
linkat(2) loop against rename(2) and rmdir(2):
BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290
Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549
collect_domain_accesses+0x278/0x290
current_check_refer_path+0x952/0x1120
security_path_link+0x1be/0x320
filename_linkat+0x342/0x6d0
__x64_sys_linkat+0xfa/0x150
Freed by task 562:
kmem_cache_free+0x139/0x4c0
i_callback+0x4b/0x80
rcu_core+0x7dc/0x10a0
Take a reference on the dentry selected as the source parent, using
dget() for the common-mount-root case and dget_parent() otherwise.
Release it after the hierarchy walk and synchronous audit logging.
[mic: Clarify the caller, reachability, and reference handling] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix incorrect free in candidate cleanup in afs_lookup_server()
Fix afs_lookup_server() to not free an existing server's endpoint state
when cleaning up a candidate server. The candidate record doesn't have an
endpoint state yet at this point, so the free for that can just be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
compute_tiles_uniform() and compute_tiles_non_uniform() loop over
num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and
assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile
and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from
the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() /
v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of
assemble_hw_pps() before indexing priv_tbl->param_set[] with an
out-of-range pic_parameter_set_id, so the writes stay within the hardware
tables. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity
vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries
into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound
the copy to the array capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer
rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by
tile_info->tile_cols and writes one descriptor per tile into the tile_info
DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows
come from the bitstream. Guard the division against a zero tile_cols by
initialising the context-update values to zero and computing them only
when tile_cols is non-zero, and stop the descriptor writes once the
tile_info buffer is full. The tile geometry written to the hardware
registers is left unmodified; the per-dimension and total tile bounds are
enforced by the control validation. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity
rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry
array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows
entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info
buffer, and programs the real tile_cols / tile_rows into the hardware.
The tile group entry control is a dynamic array sized to the number of
entries userspace submitted, independent of tile_cols / tile_rows, so a
frame that claims more tiles than entries reads past the array. A frame
that claims more than AV1_MAX_TILES tiles also leaves the hardware
programmed for more tiles than the descriptor buffer holds.
Reject both in prepare_run(): tile_cols * tile_rows must not exceed the
submitted entry count or AV1_MAX_TILES. The entry count is read via
v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1
decoder already enforces. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC tile counts
The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from
column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[]
and use them as tile-loop bounds, but std_validate_compound() does not
bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling
enabled whose tile counts exceed the uAPI array capacity, mirroring the
existing compound-control range checks. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate AV1 tile counts
The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop
bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[]
arrays, as the divisor for context_update_tile_id, and their product
bounds the per-tile descriptor buffers, but std_validate_compound() does
not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose
tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose
product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the
consuming driver so the zero-initialised control that existing userspace
submits is still accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset()
bnxt_rx_ring_reset() frees the ring buffers and then reallocates them,
ignoring the result.
bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which
returns -ENOMEM on the first failed allocation and leaves the remaining
rxr->rx_tpa[] entries zeroed.
The error isn't propagated up, so the loop in bnxt_rx_ring_reset
continues and at the end the code re-enables TPA with partially
unallocated rx_tpa array.
This means that when the agg_id from hardware is mapped to a SW index in
rxr->rx_tpa[], an uninitialized slot can be chosen which would hand a
zero DMA address to the device.
Fix this by falling back to a global reset, which is what the existing
code already does when other functions fail, but unlike the other
failure cases this particular failure has to return because TPA can't
be re-enabled since the allocation failed. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Bound SW TPA IDs to prevent crashes
FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range
0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for
57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a
software ID which is used to index rxr->rx_tpa, and to generate a mapping
between FW IDs and the wrapped software ID.
On a 57608 with firmware version 233, the firmware advertises 32
concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC
is set to 32.
If the software ID from bnxt_alloc_agg_idx is above 31, this results in
an invalid address being loaded on this line:
tpa_info = &rxr->rx_tpa[agg_id];
because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes
to tpa_info later in the code are out of bounds.
This bug results in a crash at boot:
Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI
RIP: 0010:bnxt_rx_pkt+0xc0/0x1560
RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516
RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0
RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048
R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516
R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680
FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? __netif_receive_skb_list_core+0x1ca/0x250
__bnxt_poll_work+0x152/0x280
bnxt_poll_p5+0x1cd/0x480
__napi_poll+0x30/0x180
net_rx_action+0x20b/0x3b0
? note_gp_changes+0x53/0xe0
? tick_setup_sched_timer+0x180/0x180
? __napi_schedule+0x9a/0xb0
? bnxt_msix+0x24/0x30
handle_softirqs+0xdd/0x2c0
__irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0
common_interrupt+0x85/0x90
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
This stack trace is from a crash triggered when an out of bounds rx_tpa
is dereferenced. The invalid write mentioned above is silent in this
particular crash.
Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next
power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID
with that size, so the wrapped ID can never index past the end of the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: pin DFS superblock in iterator callback
tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super()
takes its active reference only after iterate_supers_type() has dropped
s_umount and its passive reference. Concurrent DFS automount expiry can
therefore free the superblock before cifs_sb_active() uses it.
A deterministic KASAN test reproduces the race as:
BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80
The same test passes with this change applied.
Take the active reference in the callback while iterate_supers_type()
still holds s_umount shared. cifs_put_tcp_super() remains the matching
release. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount operations for this file system will fail with
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
kernel BUG at fs/super.c:777!
Fix this by only incrementing the reference count if the work has been
queued successfully. Taking it after queue_work() is safe because all
three callers hold tcon->open_file_lock across the call and
_cifsFileInfo_put() decrements under that same lock, so a worker that
starts the handler in the window cannot drop the reference before it has
been taken. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in DACL owner/group rewrite
When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a
buffer sized according to the on-disk DACL length reported by
dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each
ACE with a new owner/group SID obtained from the cifs.idmap upcall.
Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities,
making each ACE up to 76 bytes (sizeof(struct smb_ace)).
If the original DACL contains short SIDs (e.g., 1 sub-authority) while
the replacement SIDs are long, the rewritten ACEs overflow the
allocation.
Fix this by always budgeting for worst-case SID expansion: allocate
sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which
covers the smb_acl header and room for every ACE at maximum SID size.
This replaces the previous split logic that used dacl_ptr->size for
cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid
mounts: both paths can trigger the same rewrite and need the same
headroom.
KASAN reports this as:
BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs]
Write of size 4 at addr ffff8881a5e25374 by task chown/5298
...
The buggy address is located 0 bytes to the right of
allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions
The _maxlevels_ondisk functions are used to compute the size of
in-memory btree cursors for each btree type. Unfortunately, LOLLM
noticed that the rtrmap and rtrefcount versions of these functions
forget to account for the inode root, which means that we could access
beyond the end of the cursor given a sufficiently large btree. Fix
this. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed qpair and response queue, causing a
use-after-free. This is especially likely during full adapter teardown,
where destroy_workqueue(ha->wq) forces pending work to run after the queue
pairs have been freed.
Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que()
after free_irq() has released the interrupt (so no new work can be
queued) and before the response queue and qpair memory are freed (so the
flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq
to match the INIT_WORK() condition and avoid operating on an
uninitialized work_struct. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window in between, report ID
acquisition can still find the vport on vp_list and call
qla_update_host_map(); with d_id already zeroed it takes the
btree_insert32() path and re-inserts the dying vport into host_map.
Nothing cleans that entry afterwards, so once scsi_host_put() frees the
vha a later host_map lookup dereferences freed memory.
Skip a vport that has VPORT_DELETE set before taking the reference, so it
is neither re-registered nor scheduled for DPC re-registration. This
mirrors the existing guard in qla2x00_alert_all_vps(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there. |
