| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: fix unaligned memory access in timestamp adjustment
Use get_unaligned_be32() and put_unaligned_be32() to safely read and
write the timestamp fields. This prevents performance degradation due to
unaligned memory access or even a crash on strict alignment
architectures.
This follows the implementation of timestamp parsing in the networking
stack at tcp_parse_options() and synproxy_parse_options(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Add slave_destroy interface for v3 hw
WARNING is triggered when executing link reset of remote PHY and rmmod
SAS driver simultaneously. Following is the WARNING log:
WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
Call trace:
__device_links_no_driver+0xb4/0xc0
device_links_driver_cleanup+0xb0/0xfc
__device_release_driver+0x198/0x23c
device_release_driver+0x38/0x50
bus_remove_device+0x130/0x140
device_del+0x184/0x434
__scsi_remove_device+0x118/0x150
scsi_remove_target+0x1bc/0x240
sas_rphy_remove+0x90/0x94
sas_rphy_delete+0x24/0x3c
sas_destruct_devices+0x64/0xa0 [libsas]
sas_revalidate_domain+0xe4/0x150 [libsas]
process_one_work+0x1e0/0x46c
worker_thread+0x15c/0x464
kthread+0x160/0x170
ret_from_fork+0x10/0x20
---[ end trace 71e059eb58f85d4a ]---
During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
device_links_driver_bound, then this setting influences
__device_links_no_driver() before driver rmmod and caused WARNING.
Add the slave_destroy interface to make sure link is removed after flush
workque. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Reject non-exclusive metadata maps in the signed loader
The loader verifies map->sha against the metadata hash in its
instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is
called on the frozen map.
While the map is frozen, the /signed loader/ must also ensure the map
is exclusive, as, without exclusivity (which a hostile host could just
omit when loading the loader), another BPF program with map access can
mutate the contents afterwards, so the check passes on stale data.
With the extra check as part of the signed loader, it now refuses to
move on with map->sha validation if the host set it up wrongly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever fq_codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though fq_codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a recent
report [1] and a wild memory access in qfq:
[ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full)
[ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216
[ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000
[ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000
[ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024
[ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000
[ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578
[ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000
[ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0
[ 29.376103][ T360] PKRU: 55555554
[ 29.376258][ T360] Call Trace:
[ 29.376401][ T360] <TASK>
...
[ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057)
[ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored.
[1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Fix slave registration race and error handling
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler. |
| Aria2 version 1.37.0 and below is affected by a Divide By Zero issue in src/bittorrent_helper.cc, which allows a remote malicious user to cause a Denial of Service |
| Race condition in Autofill in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass web origin policy via a crafted HTML page. (Chromium security severity: High) |
| Race condition in Permissions in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in WebAppInstalls in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass web origin policy via a co-installed app. (Chromium security severity: High) |
| libjpeg-turbo 3.2.0 contains an integer division-by-zero vulnerability in the PNG loader. When processing a valid indexed-color PNG image with a non-gray palette through tj3LoadImage12() or tj3LoadImage16() using the default pixel format, the application may trigger a division-by-zero in alloc_sarray(), causing a SIGFPE and denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup
The ipc_config_data buffer for copier widgets is built once during
ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached
for reuse. For host copiers this buffer contains the copier_data with
gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes
a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link
DMA.
On suspend/resume, both host and link DMA streams are released and
re-allocated with potentially different stream tags. The underlying
copier_data and dma_config_tlv structures are correctly updated by
host_config and sdw_hda_dai_hw_params respectively. However, since the
widget list (spcm->stream[].list) persists across suspend,
sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare
never runs again to rebuild ipc_config_data. The stale cached payload
is then sent to firmware with boot-time DMA channel assignments, causing
DMA channel conflicts that lead to firmware errors and crashes.
Fix this by refreshing copier_data and dma_config_tlv portions of
ipc_config_data in sof_ipc4_widget_setup right before the IPC message
is sent. This ensures the payload always reflects the current DMA state
regardless of whether ipc_prepare ran.
For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily
inflated to include the TLV size (matching the ipc_config_data layout)
before copying, then restored, mirroring what
sof_ipc4_prepare_copier_module does when first building the buffer. |
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via spoofed TCP FIN packets without validating the sequence or acknowledgment numbers. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: byd - synchronize timer deletion before freeing private data
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix potential divide-by-zero when num_vsi is zero
For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so
pf->caps.num_vsi is zero. This leads to a divide-by-zero in
enetc4_default_rings_allocation() when distributing rings among PF and
VFs.
Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV
instructions silently return zero rather than raising an exception, so
the issue does not cause a visible crash. However, relying on this
behavior is incorrect and poses a cross-platform compatibility risk.
Add an explicit check for num_vsi == 0 and return early after the PF's
rings have been configured. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Selectively expand io_mutex
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Ensure first IDAW remains constant
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix refcount race between list:set GC and swap
__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.
Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.
kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
Call Trace:
<IRQ>
list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
call_timer_fn (kernel/time/timer.c:1748)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
run_timer_softirq (kernel/time/timer.c:2405)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt |
| Race condition in WebProtect in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in Extensions in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to bypass system access restrictions via a crafted Chrome extension. (Chromium security severity: Low) |
