Export limit exceeded: 396616 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14486 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89849 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a non-NULL garbage pointer, bypassing the NULL checks in qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and leading to a wild pointer dereference. Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast path. The outstanding_cmds slot is left untouched so a genuinely non-SCSI command still completes through its proper handler. | ||||
| CVE-2026-89856 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs). | ||||
| CVE-2026-81736 | 1 Isc | 2 Bind, Bind 9 | 2026-09-18 | 7.5 High |
| If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-61595 | 1 Djust-org | 1 Djust | 2026-09-18 | 7.7 High |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, `djust.tenants` isolation was enforced only on the HTTP path. The current tenant was stored in `threading.local()` and set exclusively by the HTTP-only `TenantMiddleware`, so on the live (WebSocket/SSE) path `get_current_tenant()` was always `None` during mount and every event handler — and the tenant-aware `QuerySet` manager failed OPEN (returned the unfiltered queryset, ignoring `STRICT_MODE`), disclosing every tenant's rows to whoever held the socket. `threading.local` was additionally shared across connections on the `sync_to_async` executor thread. This issue is fixed in djust 1.0.7. Tenant storage moved to a `contextvars.ContextVar` (per async task); the resolved tenant is bound around WS/SSE mount and every dispatch; both managers scope the base queryset once and fail CLOSED (`.none()` under the default `STRICT_MODE`); and system check S006 warns when `STRICT_MODE=False`. No known workarounds are available on the live path. | ||||
| CVE-2026-89832 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | ||||
| CVE-2026-89842 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear. Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt(). | ||||
| CVE-2026-89915 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Remove VM-wide VNCR mapping counter The global VNCR mapping counter is used to decide whether an L1 provided VNCR page is mapped in L0 on any CPU at the point of dealing with a TLB invalidation. It is incremented when a mapping is made in the fixmap, and decremented when unmapped. As it turns out, this tracking has several flaws: - we are trying to invalidate TLBs, and the mapping is only an opportunistic consequence of the TLB. Checking this counter to decide whether a TLB needs to be invalidated may result in missed invalidations. - an L1 vcpu invalidating its own TLB (a very likely case) will not succeed in invalidating the VNCR pseudo TLB because that page is not mapped in L0 at this stage. Given that this tracking fails at delivering the minimum guarantees that are required and is only a performance optimisation, remove it completely. | ||||
| CVE-2026-89937 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sgp30: Handle IAQ thread creation failure kthread_run() can fail and return an error pointer, but sgp_probe() stores it and returns success, so the device is registered without its IAQ thread and sgp_remove() later passes the error pointer to kthread_stop(). Return the error from probe instead. | ||||
| CVE-2026-89860 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe. | ||||
| CVE-2026-89866 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Resume device before setting EOS flag Setting the EOS flag talks to the firmware via send_firmware_command(), which accesses VPU registers. Both the STREAMOFF path (wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path (wave5_vpu_dec_stop()) can run while the device is runtime suspended, so those register accesses hit powered-down hardware and the SoC raises an asynchronous SError, panicking the kernel: SError Interrupt on CPU3, code 0x00000000bf000000 -- SError send_firmware_command+0x2c/0x160 [wave5] wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5] wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5] wave5_vpu_dec_job_abort+0x44/0xa0 [wave5] v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem] v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem] Resume the device with pm_runtime_resume_and_get() around the EOS firmware command and release it with pm_runtime_put_autosuspend(), matching the runtime PM handling already done in wave5_vpu_dec_device_run(). | ||||
| CVE-2026-89867 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Decoder instances sharing a VPU also share one v4l2_m2m job slot, released when the running context calls v4l2_m2m_job_finish(). While draining, device_run() defers job_finish() once EOS is sent (sent_eos), expecting a later finish_decode() (from a DEC_PIC completion IRQ) to release the slot. But the m2m core checks job_ready() only when a job is queued, not when it is dispatched. A job queued while draining can run after finish_decode() has already moved the instance to STOP and sent EOS. device_run() then runs in STOP, issues no DEC_PIC, yet still skips job_finish() - so no IRQ, no finish_decode(), and the shared slot is leaked, stalling every instance. With several v4l2h264dec instances in parallel, GStreamer hangs at EOS. Track whether the run actually queued a DEC_PIC (cmd_issued) and defer job_finish() only then. Otherwise finish the job immediately | ||||
| CVE-2026-89871 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_run() returns an ERR_PTR on failure, not NULL. When start_streaming() fails, data->kthread_vid_cap is left holding this error pointer instead of being cleared. This causes two subsequent bugs: 1. A future call to start_streaming() sees a non-NULL kthread_vid_cap and returns 0 (success) immediately, without actually starting the capture thread. 2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which is false for an error pointer, and proceeds to call kthread_stop() on the error pointer, leading to a kernel crash. Fix this by resetting kthread_vid_cap to NULL on failure before jumping to the error path. | ||||
| CVE-2026-89878 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: s2255: check firmware size before reading trailing marker s2255_probe() reads a 4-byte marker and version from the last 8 bytes of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the firmware file is shorter than 8 bytes, fw_size - 8 underflows and the access reads out of bounds. Validate the firmware size before indexing. | ||||
| CVE-2026-89932 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU. | ||||
| CVE-2026-89944 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure. | ||||
| CVE-2026-89980 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state. | ||||
| CVE-2026-89931 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a nested VM-Exit to ensure the request is cleared, even when KVM was built with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM manages to bail from VM-Enter without processing the request, and then emulates VMLAUNCH or VMRESUME. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89949 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: avoid unaligned fault in IP extraction Independent of the alignment of the ARP packet in the SKB, either the batadv_arp_ip_src or the batadv_arp_ip_dst will have an unaligned access (on HW without native unaligned read support). Use get_unaligned() to handle this properly on all architectures. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||