| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reloc root cleanup in merge_reloc_roots()
If the root we got has zero root refs in its root item, we are resetting
the root's ->reloc_root without using barriers like we do everywhere else.
Sashiko complained about this while reviewing another patch, and it's
correct (see the Link tag below).
Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless
the root points to the reloc root we have.
Fix this by using clear_reloc_root(), which issues the memory barrier
after setting the root's ->reloc_root to NULL and before clearing the bit
BTRFS_ROOT_DEAD_RELOC_TREE from the root. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: null RX pointers after free
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix out-of-bounds tid_data access in BA notif
mvmsta->tid_data was indexed by the TFD loop counter 'i' instead of
the actual TID value 'tid'. This writes lq_color into a random tid_data
slot unrelated to the BA entry.
Since multi-TID blockack is not really in use, 'i' was always 0 and no
harm was done.
Add a out-of-bound check before accessing the array. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound dirent name against end of SMB response in cifs_filldir
cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST /
FIND_NEXT response using a length (de.namelen) supplied by the server.
The kmalloc'd SMB response buffer is bounded, but nothing checks that
de.name + de.namelen still lies inside that buffer before the eventual
filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes.
A hostile SMB1 server that returns an oversized FileNameLength in a
directory entry therefore causes memchr() to read past the end of the
response slab buffer. Reachable from any user who can list a directory
on a CIFS mount served by an attacker-controlled server (getdents64()
on the mounted directory):
BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80
Read of size 1 at addr ffff88800e0640cc by task poc/115
Call Trace:
dump_stack_lvl+0x64/0x80
print_report+0xce/0x620
kasan_report+0xec/0x120
memchr+0x71/0x80
filldir64+0x4c/0x6a0
cifs_filldir.constprop.0+0x9bb/0x1e00
cifs_readdir+0x2101/0x3380
iterate_dir+0x19c/0x520
__x64_sys_getdents64+0x126/0x210
do_syscall_64+0x107/0x5a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Pass the end-of-response pointer down to cifs_filldir() and reject
entries whose name would extend past that boundary.
This bug was discovered by Artiphishell's vTriage pipeline, which
generated a userspace reproducer (an emulated hostile SMB1 server plus
a getdents64() client) that reliably triggers the KASAN report on an
unpatched kernel. The fix below was drafted with the Claude coding
assistant; a userspace reproducer is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: preserve VFS inherited POSIX ACL mask
The VFS initializes a child's POSIX ACL from the parent's default ACL and
the requested creation mode. Do not mutate the parent ACL or overwrite the
child's VFS-computed access and default ACLs afterwards.
This preserves restrictive ACL_MASK entries and prevents SMB object creation
from widening effective permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in-flight commands that can still use the old
response iovecs before the ioctl returns. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: smbus: reject oversized block transfers in the common path
The SMBus block transfer length data->block[0] is validated in
i2c_smbus_xfer_emulated() but that check runs too late for tracepoints
and is skipped entirely when the adapter provides a native smbus_xfer
implementation. This allows user-controlled oversized block lengths to
reach tracepoint memcpy calls and driver callbacks unchecked.
Add an early validation in __i2c_smbus_xfer() that rejects block
transfers whose caller-supplied length is zero or exceeds
I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback
runs. data->block[0] is filled in by the device on SMBus block reads,
so the check is scoped to operations where the length is actually
supplied by the caller. This is consistent with the existing -EINVAL
convention in the emulated path and protects all downstream consumers
at once: the smbus_write tracepoint, all native smbus_xfer driver
implementations, and the emulated path.
Two distinct bugs are fixed by this change:
Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h)
trace_smbus_write() fires before any validation and copies
data->block[0]+1 bytes into a 34-byte event buffer. With
block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221.
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530
Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91
Call Trace:
<TASK>
__asan_memcpy+0x23/0x80
trace_event_raw_event_smbus_write+0x27c/0x530
__i2c_smbus_xfer+0x43a/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c)
stub_xfer() implements .smbus_xfer directly and only clamps
block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With
block[0]=0xff and command=0 the loop accesses block[1+i] for
i up to 254, far past the 34-byte union.
UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44
index 34 is out of range for type '__u8 [34]'
Call Trace:
<TASK>
__ubsan_handle_out_of_bounds+0xd7/0x120
stub_xfer+0x1971/0x198f [i2c_stub]
__i2c_smbus_xfer+0x306/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: dma-unmap pages before handling migration errors
drm_pagemap_migrate_unmap_pages() relies on the pages array to determine
which pages require DMA unmapping. However,
drm_pagemap_migration_unlock_put_pages() clears the array as part of its
cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page
information if it is called afterward.
Call drm_pagemap_migrate_unmap_pages() before
drm_pagemap_migration_unlock_put_pages() so the pages array remains
valid during DMA unmapping. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do not fit within the fetched
size before it is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Validate udata before executing commands
The destroy callbacks currently zero the udata output after tearing down
driver resources. If the userspace access fails, uverbs preserves the
uobject and allows the destroy callback to run again, even though the
driver resource has already been freed.
Call ib_no_udata_io() before teardown so udata failures are detected
while the resource is still intact, then return success after teardown
completes.
As part of this change, move ib_respond_empty_udata() to the start of
the create and modify flows. While this is not strictly required for
general create flows, as the core layer unwinds uobjects on failure, it
is necessary for create AH. In _rdma_create_ah(), the HW object is
otherwise leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
DSP3 has an integrated Ethernet MAC Endpoint which has its own set of
config registers for configuring settings such as ASPM. The Endpoint device
has two physical functions and those two functions share the same settings.
Parse the Endpoint node under DSP3 instead of parsing both functions. The
existing parsing logic also has one OOB issue as parsing both functions
will result in accessing past the tc9563_pwrctrl->cfg array. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-ppl: fix use-after-free in ppl_do_flush()
The loop in ppl_do_flush() continues iterating after calling
ppl_io_unit_finished(), touching io->pending_flushes and leading to a
use-after-free.
Add a break statement to stop the loop once io is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: propagate IPI init errors to prevent use-after-free
When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails),
the error path frees the global xive_ipis array. However,
xive_smp_probe() previously ignored this failure and proceeded to
call xive_setup_cpu_ipi(), which dereferences the already-freed
xive_ipis pointer -- a use-after-free.
Now that xive_smp_probe() returns int (previous patch), propagate
the error from xive_init_ipis() and xive_setup_cpu_ipi() through
xive_smp_probe(). Check the return value in both pnv_smp_probe()
and pSeries_smp_probe() so that IPI setup is aborted cleanly on
failure, avoiding the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
-> vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add DIRECT_MAP_PHYSMEM_END definition
get_free_mem_region() and mhp_get_pluggable_range() bound their search
to DIRECT_MAP_PHYSMEM_END. LoongArch does not define it, so the fallback
in include/linux/mm.h applies: under CONFIG_SPARSEMEM_VMEMMAP it is
(1ULL << MAX_PHYSMEM_BITS) - 1, a compile-time constant that does not
adapt to the CPU's physical address space bits (cpu_pabits, probed from
CPUCFG1).
The vmemmap window only covers physical space below 2^(cpu_pabits+1)
(i.e. VMEMMAP_SIZE), so on CPUs with fewer physical address bits than
MAX_PHYSMEM_BITS the fallback allows get_free_mem_region() to return
a ZONE_DEVICE region outside the vmemmap window; vmemmap_populate() then
wraps the memmap range around and maps it into low memory, silently
corrupting the page tables. The same search also picked the top-of-
address-space region that crashed memmap_init_zone_device() with amdkfd
on Loongson-3C6000 in 6.16 [1]; the commit 2969b42c8f99 ("LoongArch/mm:
align vmemmap to maximal folio size") keeps that region in bounds on
current Loongson-3C6000 configs, but CPUs with smaller cpu_pabits (e.g.
the Loongson-2K series) are still affected.
Define DIRECT_MAP_PHYSMEM_END as the vmemmap-covered physical range,
(1ULL << (cpu_pabits + 1)) - 1, capped at (1ULL << MAX_PHYSMEM_BITS) - 1
under CONFIG_SPARSEMEM, similar to the commit f3336b48cf9d ("riscv: mm:
Define DIRECT_MAP_PHYSMEM_END").
[1] https://lore.kernel.org/amd-gfx/20250814032153.227285-1-jeffbai@aosc.io/ |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry
The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit()
is missing a read memory barrier (smp_rmb) before its second counter
check. The standard kernel read_seqcount_retry() includes smp_rmb()
to ensure that all data reads complete before the counter is re-checked.
Without this barrier, on weakly-ordered architectures (ARM, POWER),
the CPU may reorder field reads past the second counter check, making
the retry logic ineffective: it could observe a consistent counter pair
while reading fields that have been concurrently modified by the writer.
Add smp_rmb() before the second counter check to order the field reads
ahead of it, matching the barrier semantics of the standard seqcount
read-side. The begin-side smp_load_acquire() already pairs with the
smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering
the field reads, the retry check no longer needs acquire semantics and
reads the counter with a plain READ_ONCE(), as read_seqcount_retry()
does.
[ cel: Use READ_ONCE instead of smp_load_acquire() ] |
