| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq: add overflow bounds to quantum and initial quantum
fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 *
psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy
with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return
0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit
arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill
loop adds 0 to f->credit (which stays <= 0) and goto begin loops
forever under the qdisc lock, creating a soft lockup.
Clamp psched_mtu() to [1, 1 << 20] before multiplying so the product
cannot wrap, then cap the result at 1 << 20, matching the bound already
enforced on TCA_FQ_QUANTUM in fq_change().
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) is large enough that 2 * psched_mtu() wraps (e.g. a
dummy device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: netc: fix period truncation and potential divide-by-zero in PEROUT
The max_period bound in net_timer_enable_perout() was computed as:
max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period;
which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for
the default 333333333 Hz clock). A period_ns that passes this check but
exceeds U32_MAX is then silently truncated when stored into the u32
struct netc_pp::period field.
A truncated value of zero can reach netc_timer_set_perout_alarm(), where
the local u32 period variable would also be 0, causing a divide-by-zero
in roundup_u64(delta, period) whenever the stime < min_time branch is
taken (which always happens for a start time of {0, 0}).
Additionally, netc_timer_enable_periodic_pulse() and
netc_timer_enable_fiper() both compute:
fiper = pp->period - integral_period;
A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD,
mis-programming the FIPER hardware register.
Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER
(0xFFFFFFFF). This ensures that any period_ns passing the range check
fits in a u32 without truncation, so the stored value is always valid
and non-zero. The accepted range is reduced by integral_period ns
(typically only a few nanoseconds), which is negligible in practice. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: Reject descending VLAN tunnel ranges
A pair of descending VLAN and tunnel IDs can pass the tunnel range span
check. The VLAN subtraction produces a negative int, which is converted
to unsigned when compared with the u32 tunnel ID subtraction. It can
therefore equal the wrapped tunnel ID delta.
The range loop then performs no iterations. Since the batched
notification handling added a post-loop error check, this leaves err
uninitialized and makes the request's return value unpredictable.
Reject descending VLAN ranges before comparing the spans. Valid
ascending and single-entry ranges remain unchanged, while malformed
descending ranges consistently return -EINVAL.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS parser validates articulation chunks using the unsigned expression cbsize + connblocks * 12 without first ensuring that the multiplication and addition fit in 32 bits. A crafted DLS file can supply a large connblocks value that wraps the expression and bypasses the chunk-size check, after which the parser performs approximately one billion 12-byte iterations beyond the chunk boundary. The excessive processing and invalid reads can cause denial of service. Builds with the CMake option enable-native-dls set to OFF do not expose the parser. This issue is fixed in version 2.5.6. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In mi_enum_attr(), the start/end VCN validation for non-resident
attributes is:
if (svcn > evcn + 1) goto out;
When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn
passes the check. For evcn values close to U64_MAX (but not equal to it)
the right-hand side is still a meaningless near-wrap upper bound, so a
malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass
mi_enum_attr() unrejected.
VCN (virtual cluster number) is a cluster index, so any valid evcn is
bounded by the volume's total cluster count, which ntfs3 holds in
sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller
of mi_enum_attr() runs). Reject evcn values that fall outside this range.
However, an empty non-resident attribute (no allocated clusters) is
legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via
attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel
must keep passing, so exclude evcn == U64_MAX from the range check. The
existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is
false) and continues to require svcn == 0 for it, while the range check
rejects every other out-of-range evcn and thereby also defuses the
"evcn + 1" wraparound.
svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1"
implies svcn <= nbits.
[almaz.alexandrovich@paragon-software.com: fixed evcn check] |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check block offset is not negative
If a negative offset is read off disk (for example the offset into the
decompressed fragment block), this will cause squashfs_copy_data() to
perform an out of bounds access.
Fix by checking if offset is negative, and returning 0. This matches
existing behaviour where an offset beyond the block returns 0 bytes
copied.
To trigger this out of bounds access requires a crafted Squashfs
filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be
able to mount such a filesystem, but once mounted, an unprivileged user
can trigger the out of bounds access by reading the crafted file with the
negative offset. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, HTTP SWF decompression with the non-default swf-decompression feature and an unsafe decompress-depth can use the configured depth when allocating in src/util-file-decompression.c instead of limiting the allocation to the Flash file's actual data requirement. A crafted SWF response can therefore trigger an integer-related heap buffer overflow and crash Suricata; the default disabled feature and default depth are not affected. This issue is fixed in versions 8.0.6 and 7.0.17. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| A vulnerability was found in Freedesktop Poppler 26.07.0. The impacted element is the function JBIG2Stream::readCodeTableSeg of the file poppler/JBIG2Stream.cc. Performing a manipulation results in integer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The patch is named eb87cf711563894649bd0c365baa479401dc6d51. To fix this issue, it is recommended to deploy a patch. |
| rustls-webpki through 0.103.12 (and 0.104.0-alpha releases before 0.104.0-alpha.7) contains a reachable panic in bit_string_flags() in src/der.rs. The input guard fails to reject a named-bit BIT STRING whose content is exactly [0x00] (zero padding bits and no data bytes), so raw_bits.len() - 1 underflows on the empty slice and the subsequent index operation panics (subtract-with-overflow in debug, index-out-of-bounds in release). The condition is reachable through the public API BorrowedCertRevocationList::from_der() when a CRL contains an issuingDistributionPoint extension with such an onlySomeReasons value. Exploitation requires an application that explicitly opts in to CRL revocation checking by passing RevocationOptions to verify_for_usage() and that parses CRL bytes obtained from a source the attacker can influence; the default rustls configuration, which does not use RevocationOptions, is unaffected. A crafted CRL causes a denial of service via the panic. Fixed in 0.103.13 and 0.104.0-alpha.7. |
| An integer overflow or wraparound vulnerability in File Operation in Synology DiskStation Manager (DSM) before 7.2.1-69057-10, 7.2.2-72806-7 and 7.3.2-86009-2 allows remote authenticated users to conduct limited denial-of-service attacks. |
| Integer overflow in µD3TN v0.15.0 TCPCLv3 handshake causes heap overflow, allowing remote attackers to reliably cause DoS |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.19.6, Op_RGB24_32_to_YCbCr::convert_colorspace() stores image-plane strides in an integer width that can overflow for extremely large RGB images created through heif_image_create() and heif_image_add_plane(). The resulting wrapped stride causes the conversion loop in libheif/color-conversion/rgb2yuv.cc to compute an invalid input pointer and read beyond the allocated interleaved plane while heif_context_encode_image() performs RGB-to-YCbCr conversion. This can crash the encoding process. This issue is fixed in version 1.19.6. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: kyro: Validate overlay viewport coordinates
The overlay viewport end coordinates are computed from the viewport
origin and dimensions using 32-bit unsigned arithmetic. Large input
values can cause these calculations to wrap around before the resulting
coordinates are passed to SetOverlayViewPort().
SetOverlayViewPort() packs the viewport coordinates into 16-bit
register fields. The X coordinates are additionally adjusted by +2
and +1 before being written. Validate the coordinate calculations
for 32-bit wraparound and ensure that the adjusted coordinates fit
within their 16-bit register fields before calling
SetOverlayViewPort().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc. |
