| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| CVE-2026-116767 is an improper input handling vulnerability
in Secure Access servers prior to 14.61. Authenticated attackers can cause a
persistent denial of service. |
| In parseChunk of MPEG4Extractor.cpp, there is a possible denial of service due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| An unprivileged application can exploit a lack of package/signature validation in SystemUI's `RemoteQCController` when resolving a hardcoded `content://` URI. This allows the attacker to squat on a specific authority if the legitimate package is absent, inject spoofed UI elements into the trusted SystemUI Quick Controls panel, and gain a Background Activity Launch (BAL) grant from SystemUI when the user interacts with the spoofed element. |
| SoupAuthManager caches proxy authentication credentials without scoping them to the proxy authority (host:port). When the proxy configuration changes (e.g., via system settings or WPAD), cached Proxy-Authorization headers from the previous proxy are sent to the new proxy, leaking credentials. |
| A flaw was found in 389 Directory Server. The PBKDF2-SHA256 password verification function uses standard memcmp() for comparing password hashes instead of a constant-time comparison function. A remote attacker could potentially use timing measurements of LDAP bind attempts to infer partial hash information, though practical exploitation is extremely difficult due to PBKDF2 computational overhead. |
| A flaw was found in the GIF parser of GdkPixbuf’s LZW decoder. When an invalid symbol is encountered during decompression, the decoder sets the reported output size to the full buffer length rather than the actual number of written bytes. This logic error results in uninitialized sections of the buffer being included in the output, potentially leaking arbitrary memory contents in the processed image. |
| A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide. |
| A flaw was found in the token sanitization logic of Keycloak, an open source identity and access management solution. The issue occurs when a protocol mapper is configured to emit structured claims using the JSON type. The security check designed to remove unauthorized role mappings only looks for standard Java maps and fails to recognize Jackson based JSON objects. This allows an attacker to inject forged client roles into security tokens, which could lead to unauthorized access to protected resources. |
| A flaw was found in the SAML protocol implementation of Keycloak, an open-source identity and access management solution. The issue occurs when Keycloak handles SAML authentication requests using the HTTP-Redirect binding. If a client is configured with a wildcard redirect URL, an attacker can craft a request that includes malicious parameters. When a user authenticates, Keycloak appends its legitimate response to the attacker's parameters. This can cause some service providers to process the attacker's data instead of the real login information, potentially leading to a user being logged into the wrong account. |
| In writeGrantedUriPermissions of UriGrantsManagerService.java, there is a possible permission bypass due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible denial of service due to a missing permission check. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onCreate of SettingsApplication.java, there is a possible cross-profile consent dialog label injection due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A flaw was found in the Client-Initiated Backchannel Authentication (CIBA) implementation of Keycloak. The CIBA endpoint fails to properly validate the sub parameter, allowing it to be stored as an additional request parameter. During the token issuance process, this injected value overwrites the legitimate subject identifier. This allows an attacker to authenticate as themselves but receive security tokens belonging to a different victim user, leading to unauthorized account access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| A flaw was found in Netty. A remote attacker could exploit this vulnerability by sending specially crafted HTTP/2 or HTTP/3 Extended CONNECT requests. Netty's HTTP-object conversion path incorrectly processes these requests as regular HTTP/1.1 CONNECT requests, leading to a loss of critical protocol and path information. This misinterpretation can allow attackers to bypass security policies, such as routing or authorization logic, in applications that rely on Netty for HTTP/2 or HTTP/3 communication, resulting in integrity loss. |
| A flaw was found in Netty's HTTP/2 codec. When converting HTTP/1 CONNECT requests to HTTP/2, the component incorrectly uses the Host header instead of the CONNECT authority-form request-target for the tunnel authority. A remote attacker can exploit this by supplying a different Host header, leading to a malformed HTTP/2 CONNECT request. This can bypass security controls such as tunnel allow-lists or egress policies, resulting in integrity loss. |
| Keycloak provides a Dynamic Client Registration feature that allows users with specific tokens to register their own applications. A flaw in how Keycloak validates these registration requests allows an attacker to create a malicious application that forges identity information. By mapping their own user profile details to protected fields like the user ID (sub) or intended audience (aud), an attacker can generate signed security tokens that make them appear to be a different user. This could allow an attacker to impersonate other users or gain unauthorized access to services that rely on these tokens for identity verification. |
| A security issue was discovered in ingress-nginx where a user with permission to create an Ingress may be able to cause denial of service of the ingress-nginx data plane, or possibly redirect traffic from other Ingresses. Kubernetes clusters are only affected if they are using ingress-nginx.
Due to a missing check, the mirror-target Ingress annotation can be used to target an unauthenticated configuration API within the ingress-nginx controller, allowing write commands to be submitted. Corrupting the data within that configuration API results in all traffic through ingress-nginx being dropped until an Ingress configuration change or a controller restart causes the data to be recreated correctly.
In principle, this write access could also be used to redirect traffic from other Ingresses controlled by the same ingress-nginx instance. In practice, there is negligible additional risk: such redirection would require privileged information about internal ingress-nginx state, and users can already redirect traffic from other Ingresses controlled by the same ingress-nginx anyway. |
| dcmjs is a JavaScript implementation of DICOM manipulation. Prior to 0.52.0, the DecimalString and IntegerString implementations in src/ValueRepresentation.js sanitize text with a permissive regular expression and pass the result to JavaScript's Number constructor without validating finiteness or the DICOM value-representation rules. Scientific notation overflow in a DS or IS field can produce positive or negative Infinity, while stripping alphabetic characters from signed infinity text can leave a sign-only string that converts to NaN. IntegerString also accepts exponent notation and values outside the DICOM signed 32-bit IS range. Applications that trust these parsed values can propagate invalid numbers into spatial geometry, display windowing, dose scaling, frame counts, rescaling, or volume reconstruction, causing incorrect calculations or disrupted processing. This issue is fixed in version 0.52.0. |
