| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in Jinher OA 1.0. This issue affects some unknown processing of the file GetTreeDate.aspx. The manipulation of the argument ID leads to sql injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| Incorrect access control in Sage DPW 2024_12_004 and earlier allows unauthorized attackers to access the built-in Database Monitor via a crafted request. The vendor has stated that the issue is fixed in 2025_06_000, released in June 2025. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: add release function for struct device
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: ipheth: fix possible overflow in DPE length check
Originally, it was possible for the DPE length check to overflow if
wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB
read.
Move the wDatagramIndex term to the other side of the inequality.
An existing condition ensures that wDatagramIndex < urb->actual_length. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: ipheth: use static NDP16 location in URB
Original code allowed for the start of NDP16 to be anywhere within the
URB based on the `wNdpIndex` value in NTH16. Only the start position of
NDP16 was checked, so it was possible for even the fixed-length part
of NDP16 to extend past the end of URB, leading to an out-of-bounds
read.
On iOS devices, the NDP16 header always directly follows NTH16. Rely on
and check for this specific format.
This, along with NCM-specific minimal URB length check that already
exists, will ensure that the fixed-length part of NDP16 plus a set
amount of DPEs fit within the URB.
Note that this commit alone does not fully address the OoB read.
The limit on the amount of DPEs needs to be enforced separately. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: ipheth: fix DPE OoB read
Fix an out-of-bounds DPE read, limit the number of processed DPEs to
the amount that fits into the fixed-size NDP16 header. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix off by one in mt7925_load_clc()
This comparison should be >= instead of > to prevent an out of bounds
read and write. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: th1520: Fix memory corruption due to incorrect array size
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix the new buffer was not zeroed before writing
Before writing, if a buffer_head marked as new, its data must
be zeroed, otherwise uninitialized data in the page cache will
be written.
So this commit uses folio_zero_new_buffers() to zero the new
buffers before ->write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1745: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adding array index check to prevent memory corruption
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs/localio: must clear res.replen in nfs_local_read_done
Otherwise memory corruption can occur due to NFSv3 LOCALIO reads
leaving garbage in res.replen:
- nfs3_read_done() copies that into server->read_hdrsize; from there
nfs3_proc_read_setup() copies it to args.replen in new requests.
- nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages()
which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf
contains a ridiculous len.
- This is copied to rq_private_buf and xs_read_stream_request()
eventually passes the kvec to sock_recvmsg() which receives incoming
data into entirely the wrong place.
This is easily reproduced with NFSv3 LOCALIO that is servicing reads
when it is made to pivot back to using normal RPC. This switch back
to using normal NFSv3 with RPC can occur for a few reasons but this
issue was exposed with a test that stops and then restarts the NFSv3
server while LOCALIO is performing heavy read IO. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
The erratum_1386_microcode array requires an empty entry at the end.
Otherwise x86_match_cpu_with_stepping() will continue iterate the array after
it ended.
Add an empty entry to erratum_1386_microcode to its end. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Use dynamic allocation for CU occupancy array in 'kfd_get_cu_occupancy()'
The `kfd_get_cu_occupancy` function previously declared a large
`cu_occupancy` array as a local variable, which could lead to stack
overflows due to excessive stack usage. This commit replaces the static
array allocation with dynamic memory allocation using `kcalloc`,
thereby reducing the stack size.
This change avoids the risk of stack overflows in kernel space, in
scenarios where `AMDGPU_MAX_QUEUES` is large. The allocated memory is
freed using `kfree` before the function returns to prevent memory
leaks.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c: In function ‘kfd_get_cu_occupancy’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:322:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
322 | }
| ^ |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: Fix out-of-bounds array access
In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an
out-of-bound index. This is used as a special marker for the base
extensions, that cannot be disabled. However, when traversing the
extensions, that special marker is not checked prior indexing the
array.
Add an out-of-bounds check to the function. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
Some heap space is allocated for the flexible structure `struct
clk_hw_onecell_data` and its flexible-array member `hws` through
the composite structure `struct loongson2_clk_provider` in function
`loongson2_clk_probe()`, as shown below:
289 struct loongson2_clk_provider *clp;
...
296 for (p = data; p->name; p++)
297 clks_num++;
298
299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
300 GFP_KERNEL);
Then some data is written into the flexible array:
350 clp->clk_data.hws[p->id] = hw;
This corrupts `clk_lock`, which is the spinlock variable immediately
following the `clk_data` member in `struct loongson2_clk_provider`:
struct loongson2_clk_provider {
void __iomem *base;
struct device *dev;
struct clk_hw_onecell_data clk_data;
spinlock_t clk_lock; /* protect access to DIV registers */
};
The problem is that the flexible structure is currently placed in the
middle of `struct loongson2_clk_provider` instead of at the end.
Fix this by moving `struct clk_hw_onecell_data clk_data;` to the end of
`struct loongson2_clk_provider`. Also, add a code comment to help
prevent this from happening again in case new members are added to the
structure in the future.
This change also fixes the following -Wflex-array-member-not-at-end
warning:
drivers/clk/clk-loongson2.c:32:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix warning when unbinding
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath12k_pci),
and we get:
WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80
Call Trace:
free_large_kmalloc
ath12k_dp_free
ath12k_core_deinit
ath12k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential bit_17 double-free
A userspace with multiple threads racing I915_GEM_SET_TILING to set the
tiling to I915_TILING_NONE could trigger a double free of the bit_17
bitmask. (Or conversely leak memory on the transition to tiled.) Move
allocation/free'ing of the bitmask within the section protected by the
obj lock.
[tursulin: Correct fixes tag and added cc stable.]
(cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e) |
