| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Grocy through 4.3.0 has no CSRF protection, as demonstrated by changing the Administrator's password. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made. |
| An issue in kmqtt v0.2.7 allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking. |
| CyberPanel before 2.3.8 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the phpSelection field to the websites/submitWebsiteCreation URI. |
| The edit profile function of Grocy through 4.3.0 allows stored XSS and resultant privilege escalation by uploading a crafted HTML or SVG file, a different issue than CVE-2024-8370. |
| A heap-based buffer overflow in tsMuxer version nightly-2024-03-14-01-51-12 allows attackers to cause Denial of Service (DoS) and Code Execution via a crafted MOV video file. |
| A heap-based buffer overflow in tsMuxer version nightly-2024-03-14-01-51-12 allows attackers to cause Denial of Service (DoS), Information Disclosure and Code Execution via a crafted MKV video file. |
| A heap-based buffer overflow in tsMuxer version nightly-2024-05-12-02-01-18 allows attackers to cause Denial of Service (DoS) and Code Execution via a crafted MOV video file. |
| A security agent manual scan command injection vulnerability in the Trend Micro Deep Security 20 Agent could allow an attacker to escalate privileges and execute arbitrary code on an affected machine. In certain circumstances, attackers that have legitimate access to the domain may be able to remotely inject commands to other machines in the same domain.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability locally and must have domain user privileges to affect other machines. |
| RIOT is an operating system for internet of things (IoT) devices. In version 2024.04 and prior, the function `_parse_advertise`, located in `/sys/net/application_layer/dhcpv6/client.c`, has no minimum header length check for `dhcpv6_opt_t` after processing `dhcpv6_msg_t`. This omission could lead to an out-of-bound read, causing system inconsistency. Additionally, the same lack of a header length check is present in the function `_preparse_advertise`, which is called by `_parse_advertise` before handling the request. As of time of publication, no known patched version exists. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime with secure defaults. The Deno sandbox may be unexpectedly weakened by allowing file read/write access to privileged files in various locations on Unix and Windows platforms. For example, reading `/proc/self/environ` may provide access equivalent to `--allow-env`, and writing `/proc/self/mem` may provide access equivalent to `--allow-all`. Users who grant read and write access to the entire filesystem may not realize that these access to these files may have additional, unintended consequences. The documentation did not reflect that this practice should be undertaken to increase the strength of the security sandbox. Users who run code with `--allow-read` or `--allow-write` may unexpectedly end up granting additional permissions via file-system operations. Deno 1.43 and above require explicit `--allow-all` access to read or write `/etc`, `/dev` on unix platform (as well as `/proc` and `/sys` on linux platforms), and any path starting with `\\` on Windows.
|
| A privilege escalation vulnerability exists in the node update functionality of Veertu Anka Build 1.42.0. A specially crafted PKG file can lead to execute priviledged operation. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. |
| A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was identified in HKritesh009 Grocery List Management Web App up to f491b681eb70d465f445c9a721415c965190f83b. This affects an unknown part of the file /src/update.php. The manipulation of the argument ID leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. |
| A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function setOpMode of the file /goform/setOpMode. The manipulation of the argument ethConv leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setLan of the file /goform/setLan. The manipulation of the argument lan2enabled leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function setWan of the file /goform/setWan. The manipulation of the argument staticIp leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This vulnerability affects the function wirelessBasic of the file /goform/wirelessBasic. The manipulation of the argument submit_SSID1 leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function algDisable of the file /goform/setOpMode. The manipulation of the argument opMode leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
