| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in-flight commands that can still use the old
response iovecs before the ioctl returns. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: preserve VFS inherited POSIX ACL mask
The VFS initializes a child's POSIX ACL from the parent's default ACL and
the requested creation mode. Do not mutate the parent ACL or overwrite the
child's VFS-computed access and default ACLs afterwards.
This preserves restrictive ACL_MASK entries and prevents SMB object creation
from widening effective permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Fix NULL pointer dereference in __lock_set_class()
register_lock_class() can return NULL when the lock class pool is
exhausted, graph_lock() fails, or key validation fails. However,
__lock_set_class() uses the return value directly in pointer arithmetic
without a NULL check:
class = register_lock_class(lock, subclass, 0);
hlock->class_idx = class - lock_classes;
If class is NULL, this computes a wild offset that corrupts
hlock->class_idx. The subsequent reacquire_held_locks() call will
invoke hlock_class() with this corrupted index, leading to a NULL or
out-of-bounds pointer dereference.
Add the missing NULL check, consistent with how __lock_acquire() already
handles this case at the same call site. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in uverbs_free_dmah()
When accessing a dmah via the netlink path the only synchronization
mechanism for the said dmah is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
uverbs_free_dmah(), which is too late, since by that point
vendor-specific resources associated with the dmah might already be
freed. This can leave a short window where the dmah remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
uverbs_free_dmah(), ensuring that the dmah is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a dmah that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
[ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062
[ 2.548912] Oops: Oops: 0000 [#1] SMP PTI
Set jit_required as true in order to disallow interpreter fallback in
core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is
patched to the prog.
BTW, rename the helper bpf_map_supports_cpu_flags() to
bpf_map_is_percpu_map(). |
| In Wakapi before 2.17.6, the user caching service allows a lookup to be resolved in an unintended lookup context, leading to account takeover. |
| Keycloak provides a feature called mTLS holder-of-key binding which ensures that a token can only be used by the client that originally requested it by binding it to their digital certificate. A flaw was discovered where the new Standard Token Exchange V2 feature does not check for this certificate. This allows an attacker with stolen client credentials to obtain a standard, unrestricted token that bypasses these security protections. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.8.0 until 4.14.7, the _getattributes() function in src/os_xml/os_xml.c recursively processes every XML attribute without a depth limit while allocating two large local buffers in each stack frame. An enrolled agent can submit a Windows EventChannel event containing an element with enough attributes to exhaust the analysisd worker-thread stack, trigger a segmentation fault, and interrupt log ingestion. The element-depth limit in _ReadElem() does not constrain the number of attributes on one element, so it does not prevent this condition. This issue is fixed in version 4.14.7. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.9.0 until 4.14.7, wazuh-clusterd in framework/wazuh/core/cluster/common.py allocates a payload buffer using the size declared in a 20-byte cluster protocol header before Fernet decryption validates the peer. An unauthenticated network peer can declare a payload of up to 256 MiB, stop sending after the header, and retain that allocation until the TCP connection closes. The cluster listener has no application-level per-source connection budget in affected versions, allowing concurrent sockets to multiply memory consumption and potentially terminate the cluster process, disrupt synchronization, and interrupt distributed API forwarding. This issue is fixed in version 4.14.7. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established. |
| TREK is a collaborative travel planner. Prior to 3.3.0, TREK allows an authenticated user to store an attacker-controlled llm_base_url through the settings API when the LLM_PARSING feature is enabled. Write permission to the target trip instance is required to trigger the vulnerable AI-assisted import path. The value is consumed by the clients in server/src/nest/llm-parse/clients/openai-compatible.client.ts, server/src/nest/llm-parse/clients/anthropic.client.ts, and server/src/nest/llm-parse/router/ollama-format.client.ts without applying the server-side request forgery guard. Triggering AI-assisted trip parsing causes the server to request the supplied destination, and upstream error response text can be returned in parsing warnings. This permits internal service discovery and access to link-local cloud metadata, with possible disclosure of infrastructure credentials and subsequent modification of protected cloud resources. This issue is fixed in version 3.3.0. |
| TREK is a collaborative travel planner. Prior to 3.3.0, the get_trip_summary tool in server/src/mcp/tools/trips.ts is registered for scoped OAuth MCP tokens without requiring trips:read and returns core trip summary data regardless of the delegated scopes. A token granted only an unrelated capability, such as weather:read, can receive trip metadata, member email addresses from server/src/services/tripService.ts, itinerary days, and accommodations for every trip accessible to the token's user. Cross-user trip authorization remains enforced, but the missing scope check defeats the consented least-privilege boundary and exposes trip content and third-party contact information to an MCP client that was not authorized to read it. This issue is fixed in version 3.3.0. |
| TREK is a collaborative travel planner. Prior to 3.3.0, getSharedTripData in server/src/services/shareService.ts returns days, assignments, dayNotes, and places through GET /api/shared/:token even when the trip owner disables share_map. The client hides the map, but the public JSON response still includes the itinerary and place names, coordinates, addresses, descriptions, notes, and prices. Anyone holding the valid share token can therefore read location and route information that the owner explicitly chose not to share, although the random token remains required and the flaw does not permit modification. This issue is fixed in version 3.3.0. |
| TREK is a collaborative travel planner. Prior to 3.3.0, the DELETE /api/trips/:tripId/collab/notes/:noteId/files/:fileId endpoint authorizes an authenticated user against the attacker-controlled tripId but deleteNoteFile in server/src/services/collabService.ts resolves the target only by note and file identifiers without requiring the file to belong to that trip. A user with edit access to any trip can submit identifiers belonging to another user's trip and permanently delete that note-file attachment. Sequential identifiers make broad targeting practical, while attachment read operations remain trip-scoped and are not affected. This issue is fixed in version 3.3.0. |
| TREK is a collaborative travel planner. Prior to 3.4.0, the checkSsrf logic in server/src/utils/ssrfGuard.ts does not recognize NAT64, 6to4, or Teredo IPv6 transition addresses that encode an IPv4 destination. An authenticated user who controls a DNS record can supply a URL whose AAAA result is a transition address embedding a private, loopback, or link-local IPv4 target, and isAlwaysBlocked and isPrivateNetwork classify the address as allowed. In a deployment that routes the applicable transition format, user-facing imports, webhooks, integrations, or plugin egress can reach internal services or cloud metadata and expose returned information. This issue is fixed in version 3.4.0. |
| Krayin CRM through 2.2.6 contains a stored client-side template injection vulnerability that allows authenticated attackers to execute arbitrary JavaScript in other users' browsers by injecting Vue.js template expressions into the product name field. Attackers can craft a product name containing double-brace template syntax that reaches the Vue template compiler, enabling prototype chain traversal to retrieve the Function constructor and execute attacker-supplied JavaScript in the application origin for every user who views the affected product record. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps6594: Fix device node reference leaks in multiphase loop
In tps6594_regulator_probe(), the multi-phase configuration loop calls
of_find_node_by_name() to find buck nodes by name, and of_get_parent()
twice to navigate to the PMIC parent node. None of the acquired node
references (np, intermediate parent, np_pmic_parent) are ever released
via of_node_put(), causing a reference leak on every loop iteration.
Additionally, of_find_node_by_name() can return NULL, but the result was
immediately passed to of_node_full_name() and of_get_parent() without a
NULL check, which could lead to a NULL pointer dereference.
Fix this by:
- Adding a NULL check for np after of_find_node_by_name()
- Storing the intermediate parent node in a local variable np_parent
- Calling of_node_put() on np, np_parent and np_pmic_parent at the
end of each loop iteration |
