| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: skip device-private PMDs in madvise_free_huge_pmd
madvise_free_pte_range() checks pmd_trans_huge(*pmd) unlocked, then
madvise_free_huge_pmd() takes pmd_trans_huge_lock(). pmd_is_huge()
returns true for a device-private PMD, so orig_pmd can be device-private
and enter the !pmd_present() branch.
Skip device-private PMDs in that non-present branch and continue to out
before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so
an unexpected PMD softleaf logs a warning rather than panicking. Drop the
thp_migration_supported() guard: it expands to
IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both
pmd_is_migration_entry() and pmd_is_device_private_entry() already return
false when that config is not selected, so the guard suppresses only the
case where the warning would already be silent.
Potential trigger: an HMM-based GPU driver races with madvise(MADV_FREE):
migrate_vma_pages() flips the PMD to a device-private entry between the
caller's pmd_trans_huge() check and the callee's pmd_trans_huge_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/madvise: skip device-private PMDs in cold and pageout walks
madvise_cold_or_pageout_pte_range() takes pmd_trans_huge_lock(), whose
pmd_is_huge() check returns true for a device-private PMD. The subsequent
!pmd_present() branch has a VM_BUG_ON() asserting migration is the only
allowed non-present case; a device-private PMD trips it.
Skip device-private PMDs in that non-present branch and continue to
huge_unlock before calling pmd_folio(). Downgrade the check to
VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than
panicking. Drop the thp_migration_supported() guard: it expands to
IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both
pmd_is_migration_entry() and pmd_is_device_private_entry() already return
false when that config is not selected, so the guard suppresses only the
case where the warning would already be silent.
Potential trigger: an HMM-based GPU driver races with
madvise(MADV_COLD)/MADV_PAGEOUT: pmd_trans_huge(*pmd) reads true, then
migrate_vma_pages() flips the PMD to a device-private entry before the PMD
lock is acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg()
print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the
start to guard against tail pages and NULL data. However, it later
re-reads page->memcg_data locklessly in two places:
1: page_memcg_check(page)
2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes
VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS)
If the page is concurrently freed and reallocated as a THP tail page or
slab page between these calls, the VM_BUG_ON assertions can trigger on
CONFIG_DEBUG_VM=y builds, crashing the kernel.
Fix both TOCTOU issues by using the memcg_data snapshot throughout. |
| In the Linux kernel, the following vulnerability has been resolved:
cdx: Fix double free when sysfs file creation fails
In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code
frees res_attr but doesn't set cdx_dev->res_attr[num] to NULL. This
leaves a dangling pointer in the array. Then cdx_destroy_res_attr()
frees the already-freed memory. Fix the double free by initializing
cdx_dev->res_attr[num] after sysfs_create_bin_file() completes. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usbg_make_tpg() held dep_lock while calling
configfs_depend_item_unlocked(), which acquires the configfs root
inode lock when operating across subsystems. This creates a circular
lock dependency with configfs_rmdir():
dep_lock -> configfs root inode lock -> su_mutex -> dep_lock
In usbg_make_tpg(), dep_lock only serialized the read of opts->ready,
which is a monotonic flag that transitions from false to true exactly
once (in tcm_set_name()) and never reverts. Remove dep_lock from
usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access
opts->ready locklessly instead. |
| In the Linux kernel, the following vulnerability has been resolved:
of: fix out-of-bounds read in of_alias_scan() stem parser
The stem parser tests isdigit(*(end - 1)) before checking end > start
and so reads one byte before the property name when the name is empty
or all digits. Check the bound first. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: guard nfsd_serv deref in nfsd_file_net_dispose
nfsd_file_net_dispose() is the consumer side of l->freeme: the nfsd
service thread loop calls it to drain entries that the filecache
garbage collector and shrinker append via
nfsd_file_dispose_list_delayed(). During per-net teardown,
nn->nfsd_serv is cleared before the filecache laundrette is shut
down, so the service thread can still run a dispose pass that finds
more than eight entries on l->freeme and dereferences a NULL
svc_serv:
nfsd service thread loop
nfsd_file_net_dispose(nn)
if (!list_empty(&l->freeme)) {
...
svc_wake_up(nn->nfsd_serv); /* nn->nfsd_serv == NULL */
}
The sibling helper nfsd_file_dispose_list_delayed() already documents
this ordering and caches nn->nfsd_serv into a local before testing it
for NULL. nfsd_file_net_dispose() was introduced with the same raw
svc_wake_up(nn->nfsd_serv) call and never picked up the guard.
Fix by loading nn->nfsd_serv into a local svc_serv pointer and only
calling svc_wake_up() when it is non-NULL, matching the pattern in
nfsd_file_dispose_list_delayed(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialize DRC hash table before registering shrinker
shrinker_register() precedes the INIT_LIST_HEAD loop and the
drc_hashsize store. On weakly-ordered architectures (arm64, ppc),
a shrinker scan can observe drc_hashsize before the bucket list
heads are initialized, causing a NULL deref in the DRC shrinker
callback.
Move bucket initialization and the drc_hashsize store before
shrinker_register() so the hash table is fully initialized before
it becomes visible to the shrinker. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden DFS cache against invalid target hints
Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is
NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always
valid.
In preparation for clearing ce->tgthint in free_tgts(), harden callers
of get_tgt_name() against ERR_PTR results and harden
dfs_cache_noreq_update_tgthint() against NULL pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb
BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log
shows the HCI Read Local Version command was sent and the firmware
replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG),
but the waiter in __hci_cmd_sync_sk() never woke up and timed out
after 10 s:
bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk
bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add
bluetooth hci0: skb len 4 // hci_cmd_sync_alloc
bluetooth hci0: length 1 // hci_req_sync_run
Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work
Bluetooth: hci0 type 1 len 4 // hci_send_frame
Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete
<-- req_skb NULL: req_complete_skb not set,
hci_cmd_sync_complete() never called,
req_status stays HCI_REQ_PEND -->
<-- 10 s later: wait_event_interruptible_timeout expires -->
bluetooth hci0: end: err -110 // __hci_cmd_sync_sk
The root cause is that hci_send_cmd_sync() clones the sent command
into hdev->req_skb so that hci_req_cmd_complete() can locate the
registered completion callback. Under memory pressure this
skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply
is received and processed, but hci_req_cmd_complete() finds NULL
req_skb, so hci_cmd_sync_complete() is never called, req_status
stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT.
req_skb is only used to read bt_cb(skb)->hci callbacks and opcode --
it is never modified. Replace skb_clone() with skb_get(), which
simply increments the reference count of hdev->sent_cmd without
allocating new memory and therefore cannot fail.
This issue was first observed as a use-after-free in ttyport_close()
when ttyport_open() failed, which was investigated in an earlier
patch series [1]. That investigation led to the discovery of the
true root cause described above.
[1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry
svcauth_gss_decode_credbody() writes the caller's
rpc_gss_wire_cred field by field and assigns gc_ctx.len only on
the success tail. The caller storage is svcdata->clcred, which
lives in the per-svc_rqst gss_svc_data and is reused across
requests. Early decode failures leave partially decoded state
mixed with residue from the prior request.
The trailing body_len tightness check is the sharpest case:
xdr_stream_decode_opaque_inline() has already written gc_ctx.data
with a borrowed inline pointer into the current request's XDR
pages, but gc_ctx.len retains its prior value. Once the request
pages are released the pooled clcred carries a dangling pointer
paired with a stale length.
Zero the caller's rpc_gss_wire_cred at function entry so that
every early-return path leaves a deterministic all-zero cred.
On the trailing tightness-check path, gc_ctx.len is now zero
instead of stale, which neuters length-driven consumers such as
gss_svc_searchbyctx() that would otherwise walk the dangling
data pointer. |
| Untrusted search path in Windows Storage allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/proc: Use file_ns_capable() when checking config space read access
proc_bus_pci_read() decides how much of the config space is readable based
on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling
read(), not the credentials of the process that opened the file.
The sysfs equivalent, pci_read_config(), has checked the credentials of the
opening process since commit de139a339395 ("pci: check caps from sysfs file
open to read device dependent config space"), so a privileged process can
open the config space file and pass the file descriptor to an unprivileged
process (for example, a process running a KVM guest with an assigned
device), which can then read the entire config space. The check was
subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci:
use security_capable() when checking capablities during config space read")
and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs:
use proper file capability helper function").
Thus, the two interfaces check the same capability against different
credentials. Checking the credentials of the task calling read() makes the
outcome depend on who reads rather than who opened, so the restriction is
bypassed whenever a more privileged process reads through the descriptor.
Checking the credentials recorded in file->f_cred settles the decision at
open() time and ties it to the file, where it cannot change with the
caller.
Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in
effect when the file was opened, bringing the procfs interface in line with
the sysfs behaviour.
As a result, a file descriptor opened by a privileged process and passed to
an unprivileged one now allows the entire config space to be read through
procfs, matching sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Manage teardown with devm
arm_smmu_device_remove() manually frees the IOPF queue, destroys the
vmid_map and disables the device, while the IRQs and queues are devm
managed. devm unwinds only after remove() returns, so the cleanup runs
in the wrong order. The IOPF queue is freed before the event-queue IRQ
whose handler uses it.
Manage all of it with devm so the unwind order is correct. Free the IOPF
queue and vmid_map via devm actions, and disable the device from one
registered after arm_smmu_device_reset().
This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC
use-after-free in the subsequent patch. |
| Use after free in Windows Remote Access Connection Manager allows an authorized attacker to elevate privileges locally. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, match_value/3 passes the user-supplied ?name= regular expression to re:run with no match_limit option, and executes it once per resource in the result set. OTP's default 10M match_limit caps each call at roughly 100-200ms, but the regex runs once per resource in the result set. With a large set, for example 5000 queues at 150ms each, a single request consumes 12 or more minutes of CPU. Parallel requests saturate the schedulers. The use_regex=true option is a supported feature on list endpoints, so this path is reachable through normal API use. Preconditions include Any user with the management tag can exploit this.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, is_authorized/2 for the /federation-links/.../restart route uses is_authorized_monitor (accepts the monitoring tag), while allowed_methods permits DELETE and delete_resource/2 triggers rabbit_federation_link_sup:restart. There is no per-method elevation check and no comment marking it intentional. A read-only monitoring user can restart any federation link , a state-changing operation that disrupts message flow. Preconditions include rabbitmq_federation + rabbitmq_federation_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The AMQP 0-9-1 shovel calls amqp_uri:remove_credentials before storing its connection URI, but the AMQP 1.0 shovel stores the raw URI including the password. The stored URI is visible via GET /api/shovels and via rabbitmqctl shovel_status. Preconditions include The Shovel plugin must be in use with AMQP 1.0 shovels configured using URI-embedded credentials. Reading the exposed status requires the monitoring tag.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
