| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Emissary is a P2P based data-driven workflow engine. The ChecksumCalculator class within allows for hashing and checksum generation, but it includes or defaults to algorithms that are no longer recommended for secure cryptographic use cases (e.g., SHA-1, CRC32, and SSDEEP). These algorithms, while possibly valid for certain non-security-critical tasks, can expose users to security risks if used in scenarios where strong cryptographic guarantees are required. This issue is fixed in 8.24.0. |
| itech iLabClient 3.7.1 relies on the hard-coded YngAYdgAE/kKZYu2F2wm6w== key (found in iLabClient.jar) for local users to read or write to the database. |
| sigstore-python is a Python tool for generating and verifying Sigstore signatures. Versions of sigstore-python newer than 2.0.0 but prior to 3.6.0 perform insufficient validation of the "integration time" present in "v2" and "v3" bundles during the verification flow: the "integration time" is verified *if* a source of signed time (such as an inclusion promise) is present, but is otherwise trusted if no source of signed time is present. This does not affect "v1" bundles, as the "v1" bundle format always requires an inclusion promise.
Sigstore uses signed time to support verification of signatures made against short-lived signing keys. The impact and severity of this weakness is *low*, as Sigstore contains multiple other enforcing components that prevent an attacker who modifies the integration timestamp within a bundle from impersonating a valid signature. In particular, an attacker who modifies the integration timestamp can induce a Denial of Service, but in no different manner than already possible with bundle access (e.g. modifying the signature itself such that it fails to verify). Separately, an attacker could upload a *new* entry to the transparency service, and substitute their new entry's time. However, this would still be rejected at validation time, as the new entry's (valid) signed time would be outside the validity window of the original signing certificate and would nonetheless render the attacker auditable. |
| A vulnerability was found in Satellite. When running a remote execution job on a host, the host's SSH key is not being checked. When the key changes, the Satellite still connects it because it uses "-o StrictHostKeyChecking=no". This flaw can lead to a man-in-the-middle attack (MITM), denial of service, leaking of secrets the remote execution job contains, or other issues that may arise from the attacker's ability to forge an SSH key. This issue does not directly allow unauthorized remote execution on the Satellite, although it can leak secrets that may lead to it. |
| A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.64), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.64), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.64), SIPROTEC 5 6MD89 (CP300) (All versions < V9.64), SIPROTEC 5 6MU85 (CP300) (All versions < V9.64), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V9.64), SIPROTEC 5 7SA82 (CP100) (All versions < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.65), SIPROTEC 5 7SA84 (CP200) (All versions), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.65), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.65), SIPROTEC 5 7SD82 (CP100) (All versions < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.65), SIPROTEC 5 7SD84 (CP200) (All versions), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.65), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.65), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.65), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.65), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.65), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.65), SIPROTEC 5 7SK82 (CP100) (All versions < V8.89), SIPROTEC 5 7SK82 (CP150) (All versions < V9.65), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.65), SIPROTEC 5 7SL82 (CP100) (All versions < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.65), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.65), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.65), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST86 (CP300) (All versions < V9.64), SIPROTEC 5 7SX82 (CP150) (All versions < V9.65), SIPROTEC 5 7SX85 (CP300) (All versions < V9.65), SIPROTEC 5 7UM85 (CP300) (All versions < V9.64), SIPROTEC 5 7UT82 (CP100) (All versions < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.65), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.65), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.65), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.65), SIPROTEC 5 7VE85 (CP300) (All versions < V9.64), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.65), SIPROTEC 5 7VU85 (CP300) (All versions < V9.64), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V9.62 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V9.62 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions < V9.62), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.64). The affected devices are supporting weak ciphers on several ports (443/tcp for web, 4443/tcp for DIGSI 5 and configurable port for syslog over TLS).
This could allow an unauthorized attacker in a man-in-the-middle position to decrypt any data passed over to and from those ports. |
| gitoxide is an implementation of git written in Rust. Before 0.42.0, gitoxide uses SHA-1 hash implementations without any collision detection, leaving it vulnerable to hash collision attacks. gitoxide uses the sha1_smol or sha1 crate, both of which implement standard SHA-1 without any mitigations for collision attacks. This means that two distinct Git objects with colliding SHA-1 hashes would break the Git object model and integrity checks when used with gitoxide. This vulnerability is fixed in 0.42.0. |
| CyberGhostVPNSetup.exe (Windows installer) is signed using the weak cryptographic hash algorithm SHA-1, which is vulnerable to collision attacks. This allows a malicious actor to craft a fake installer with a forged SHA-1 certificate that may still be accepted by Windows signature verification mechanisms, particularly on systems without strict SmartScreen or trust policy enforcement. Additionally, the installer lacks High Entropy Address Space Layout Randomization (ASLR), as confirmed by BinSkim (BA2015 rule) and repeated WinDbg analysis. The binary consistently loads into predictable memory ranges, increasing the success rate of memory corruption exploits. These two misconfigurations, when combined, significantly lower the bar for successful supply-chain style attacks or privilege escalation through fake installers. |
| HiveOS through 0.6-102@191212 ships with SSH host keys baked into the installation image, which allows man-in-the-middle attacks and makes identification of all public IPv4 nodes trivial with Shodan.io. NOTE: as of 2019-09-26, the vendor indicated that they would consider fixing this. |
| This vulnerability exists in USB Pratirodh due to the usage of a weaker cryptographic algorithm (hash) SHA1 in user login component. A local attacker with administrative privileges could exploit this vulnerability to obtain the password of USB Pratirodh on the targeted system.
Successful exploitation of this vulnerability could allow the attacker to take control of the application and modify the access control of registered users or devices on the targeted system.
|
| SimpleMiningOS through v1259 ships with SSH host keys baked into the installation image, which allows man-in-the-middle attacks and makes identification of all public IPv4 nodes trivial with Shodan.io. NOTE: the vendor indicated that they have no plans to fix this, and discourage deployment using public IPv4. |
| Use of Hard-coded Cryptographic Key vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
source code and control network, the attacker can bypass the REST interface authentication and gain access to MQTT configuration data.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| A vulnerability was detected in PandaXGO PandaX up to fb8ff40f7ce5dfebdf66306c6d85625061faf7e5. This affects an unknown function of the file config.yml of the component JWT Secret Handler. The manipulation of the argument key results in use of hard-coded cryptographic key
. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| Pheonix App is a Python application designed to streamline various tasks, from managing files to playing mini-games. The issue is that the map of encoding/decoding languages are visible in code. The Problem was patched in 0.2.4. |
| Use of hard-coded cryptographic key issue exists in AIPHONE IX SYSTEM, IXG SYSTEM, and System Support Software. A network-adjacent unauthenticated attacker may log in to SFTP service and obtain and/or manipulate unauthorized files. |
| In illumos illumos-gate 2024-02-15, an error occurs in the elliptic curve point addition algorithm that uses mixed Jacobian-affine coordinates, causing the algorithm to yield a result of POINT_AT_INFINITY when it should not. A man-in-the-middle attacker could use this to interfere with a connection, resulting in an attacked party computing an incorrect shared secret. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). The affected devices support the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite, which uses CBC (Cipher Block Chaining) mode that is known to be vulnerable to timing attacks. This could allow an attacker to compromise the integrity and confidentiality of encrypted communications. |
| The JWT secret key is embedded in the egOS WebGUI backend and is readable to the default user. An unauthenticated remote attacker can generate valid HS256 tokens and bypass authentication/authorization due to the use of hard-coded cryptographic key. |
| The device uses a weak hashing alghorithm to create the password hash. Hence, a matching password can be easily calculated by an attacker. This impacts the security and the integrity of the device. |
| Actualizer is a single shell script solution to allow developers and embedded engineers to create Debian operating systems (OS). Prior to version 1.2.0, Actualizer uses OpenSSL's "-passwd" function, which uses SHA512 instead of a more suitable password hasher like Yescript/Argon2i. All Actualizer users building a full Debian Operating System are affected. Users should upgrade to version 1.2.0 of Actualizer. Existing OS deployment requires manual password changes against the alpha and root accounts. The change will deploy's Debian's yescript overriding the older SHA512 hash created by OpenSSL. As a workaround, users need to reset both `root` and "Alpha" users' passwords. |
| Reusing a nonce, key pair in encryption issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. If this vulnerability is exploited, the content of direct messages (DMs) between users may be manipulated by a man-in-the-middle attack. |
