| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MOOS-IvP iSay through 24.8.1 contains a remote code execution vulnerability in the SAY_MOOS variable handler that passes unsanitized text to a shell command. Attackers can publish SAY_MOOS messages containing backticks or command substitution syntax to execute arbitrary commands as the iSay process user. |
| A vulnerability was determined in D-Link DNS-320 ShareCenter 2.06B01. This affects an unknown part of the file /cgi/file_sharing.cgi of the component File Sharing. Executing a manipulation of the argument fileurl can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| SEPPmail Secure Email Gateway before 15.0.6 deserializes attacker-controlled data in a privileged REST import workflow without adequate validation. An attacker with a privileged API token can execute arbitrary commands with "nobody" privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ionic: avoid OOB TX partner lookup for hwstamp RXQ
The dedicated hardware timestamp RX queue is allocated with q->index
equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only
contains the regular queue pairs, so using that index to set rxq->partner
can read one entry past txqcqs[] and then write through the derived
pointer.
Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp
RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue
has no TX partner. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: fix OOB write when hid->inputs is empty
hid_pidff_init_with_quirks() derives its input_dev from
list_entry(hid->inputs.next, struct hid_input, list)
without first checking that hid->inputs is non-empty. The list member
of struct hid_input is at offset 0, so on an empty list list_entry()
yields &hid->inputs itself and the following hidinput->input load reads
an unrelated member of struct hid_device. dev is then a type-confused
pointer, and force-feedback init writes through it: each
set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of
the object dev actually aliases, and input_ff_create() adds further
writes of a heap pointer and two function pointers.
Until hid-universal-pidff the only caller was hid_pidff_init() from
usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at
least one hid_input. universal_pidff_probe() starts the device with
HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls
hid_pidff_init_with_quirks() directly whenever the descriptor carries a
PID usage page, bypassing that gate. A report descriptor whose only
application collection is on HID_UP_PID leaves hid->inputs empty while
hid_connect() still succeeds through the hidraw claim, so probe reaches
the unguarded list_entry().
The write happens in the USB probe path, on the hotplug workqueue, so
plugging in a malicious device is enough to trigger it; no attacker
software and no logged-in user are required. KASAN reports an 8-byte
out-of-bounds write in hid_pidff_init_with_quirks() reached from
universal_pidff_probe().
Check for an empty list before deriving dev and return -ENODEV, as the
other HID force-feedback drivers already do. universal_pidff_probe()
propagates the error and unwinds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: zero the sockaddr before returning it in getname
iso_sock_getname() fills a struct sockaddr_iso in place and returns its
size without clearing it first, so bytes it does not write are copied to
user space from the kernel stack. The getsockname(2) and getpeername(2)
paths both run through do_getsockname(), which hands getname() an
uninitialized sockaddr_storage on the stack and copies back up to the
number of bytes getname() returns, so the driver has to initialize every
byte it accounts for.
Two ranges are left uninitialized:
- struct sockaddr_iso is 10 bytes but only 9 are written (family,
iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every
call.
- for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows
by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and
bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of
that structure, are never written.
An unprivileged process can open a BTPROTO_ISO socket and reach the pad
leak with getsockname(); the broadcast leak needs an established BIS/PA
connection. l2cap and rfcomm already memset their sockaddr in getname
for the same reason; do the same here. |
| pymonocypher uses cython to wrap the Monocypher C library. Prior to version 4.0.2.8, the argon2i_32 implementation does not check the nb_blocks size. If the caller does not provide a sufficiently large buffer based on the API contract, then argon2i_32 will write past the end of the buffer and possibly corrupt the heap. This issue has been patched in version 4.0.2.8. |
| Improper neutralization of special elements used in an OS command (CWE-78) in the blueprint resynthesis framework in Amazon Web Services codecatalyst-blueprints before 0.3.156 might allow a user with permission to commit to a repository in the project to execute arbitrary commands in the blueprint resynthesis environment via shell metacharacters in the owner field of a [local] merge strategy entry in a crafted .ownership-file.
Version 0.3.156 removes shell interpretation of the owner field, running the command directly rather than through a shell, and rejects values outside an allowlisted command form. This eliminates shell metacharacter command injection. To remediate this issue, users should upgrade to version 0.3.156 or later.
No action is required for use of the Amazon CodeCatalyst service. Resynthesis runs in an isolated per-project environment with scoped credentials, and the service applies server-side validation there that rejects [local] merge strategy commands outside a restricted allowlisted form, including for blueprint versions published before 0.3.156. |
| MOOS-IvP uMemWatch through 24.8.1 constructs shell commands from attacker-chosen MOOS client names without sanitization. Attackers can inject shell metacharacters into client names to execute arbitrary commands as the uMemWatch process user through unquoted redirection targets in system calls. |
| A vulnerability was found in D-Link DNS-340L 1.01B04. Affected by this issue is some unknown functionality of the file /cgi-bin/dropbox.cgi of the component CGI Handler. Performing a manipulation of the argument callback_url/sync_interval results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used. |
| Dell SmartFabric OS10 Software, versions prior to 10.5.6.14, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Authenticated command injection vulnerabilities exist in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate sparing table length as an entry count, not a byte count
udf_load_sparable_map() accepts a sparing table when
sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize
is false, i.e. it treats reallocationTableLen as a number of BYTES that
must fit in the block. But the table is walked as an array of 8-byte
sparingEntry elements:
for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) {
struct sparingEntry *entry = &st->mapEntry[i];
... entry->origLocation ...
}
in udf_get_pblock_spar15() and udf_relocate_blocks(). A
reallocationTableLen of N therefore passes the check whenever
sizeof(*st) + N <= blocksize, yet the consumers index
sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the
block. On a crafted UDF image this is an out-of-bounds read in
udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the
same length to udf_update_tag(), whose crc_itu_t() reads far past the
block, and its memmove() through st->mapEntry[] is an out-of-bounds
write.
Validate reallocationTableLen as the entry count it is, with
struct_size(). |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate VAT header length against the VAT inode size
udf_load_vat() takes the virtual partition's start offset straight from
the on-disk VAT 2.0 header without checking it against the VAT inode
size:
map->s_type_specific.s_virtual.s_start_offset =
le16_to_cpu(vat20->lengthHeader);
map->s_type_specific.s_virtual.s_num_entries =
(sbi->s_vat_inode->i_size -
map->s_type_specific.s_virtual.s_start_offset) >> 2;
lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds
the VAT inode size, the s_num_entries subtraction underflows to a huge
count, which defeats the "block > s_num_entries" bound in
udf_get_pblock_virt15(); and on the ICB-inline path that function reads
((__le32 *)(iinfo->i_data + s_start_offset))[block]
so a large s_start_offset indexes past the inode's in-ICB data. Mounting
a crafted UDF image with a virtual (VAT) partition then triggers an
out-of-bounds read.
Reject a VAT whose header length does not leave room for at least one
entry within the VAT inode. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate BTF repeated field counts before expansion
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts. |
| A flaw was found in GDB's STABS debug format parser. The
read_member_functions() function in gdb/stabsread.c contains a linked
list removal bug in the code that separates destructor and non-destructor
member functions of C++ classes. The bug causes the destructor entries to
remain in the main function list while the list length counter is
decremented, resulting in an out-of-bounds write when the function list
is copied to its final allocated array. An attacker can craft an ELF
binary with malicious .stab and .stabstr sections that triggers this
out-of-bounds write when a user opens the file in GDB and performs any
symbol-inspection operation such as setting a breakpoint. The inferior
process does not need to be executed. Under controlled conditions, this
was demonstrated to achieve execution of arbitrary commands within the
GDB process. |
| A vulnerability has been found in D-Link DNS-340L 1.01B04. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/addon_center.cgi of the component Add-On Center. Such manipulation of the argument f_name/f_url/f_flag/f_login_user leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| Memory Allocation with Excessive Size Value (CWE-789) in the Prometheus remote_write HTTP handler in Metricbeat can lead Denial of Service via Excessive Allocation (CAPEC-130). |
| In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count. |
