| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in Spring Spring Security. If an application is using securityMatchers(String) and a PathPatternRequestMatcher.Builder bean to prepend a servlet path, matching requests to that filter chain may fail and its related security components will not be exercised as intended by the application. This can lead to the authentication, authorization, and other security controls being rendered inactive on intended requests.This issue affects Spring Security: from 7.0.0 through 7.0.4. |
| Vulnerability in Spring Spring Security. If an application uses <sec:intercept-url servlet-path="/servlet-path" pattern="/endpoint/**"/> to define the servlet path for computing a path matcher, then the servlet path is not included and the related authorization rules are not exercised. This can lead to an authorization bypass.This issue affects Spring Security: from 7.0.0 through 7.0.4. |
| A zone transition from NSEC to NSEC3 might trigger an internal inconsistency and cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
Add validation of the inner IPv4 packet tot_len and ihl fields parsed
from decrypted IPTFS payloads in __input_process_payload(). A crafted
ESP packet containing an inner IPv4 header with tot_len=0 causes an
infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the
data offset never advances and the while(data < tail) loop never
terminates, spinning forever in softirq context.
Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct
iphdr), which catches both the tot_len=0 case and malformed ihl values.
The normal IP stack performs this validation in ip_rcv_core(), but IPTFS
extracts and processes inner packets before they reach that layer. |
| Heap-based buffer overflow vulnerability in Samsung Open Source Escargot allows out-of-bounds write.This issue affects Escargot:commit hash
97e8115ab1110bc502b4b5e4a0c689a71520d335
. |
| Out-of-bounds read vulnerability in Samsung Open Source Escargot allows Resource Leak Exposure.This issue affects Escargot: 97e8115ab1110bc502b4b5e4a0c689a71520d335. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain a stack-based buffer overflow vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| Dell PowerProtect Data Domain, versions 8.5 through 8.6 contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| Dell PowerProtect Data Domain, versions 8.5 through 8.6 contain an improper input validation vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an improper input validation vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| Out-of-bounds write vulnerability in Samsung Open Source Escargot allows Overflow Buffers.This issue affects Escargot: 97e8115ab1110bc502b4b5e4a0c689a71520d335. |
| Integer overflow vulnerability in Samsung Open Source Escargot allows Overflow Buffers.This issue affects Escargot: 97e8115ab1110bc502b4b5e4a0c689a71520d335. |
| Out-of-bounds read vulnerability in Samsung Open Source Escargot allows Resource Leak Exposure.This issue affects Escargot: 97e8115ab1110bc502b4b5e4a0c689a71520d335. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| Dell PowerProtect Data Domain with Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.60, contain a stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the pppoeMtu parameter to /cgi-bin/cstecgi.cgi. |
| IP Setting Software contains an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with administrative privileges. |
| A server-side request forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an attacker to extract sensitive environment variables from the instance through a timing side-channel attack against the notebook rendering service. When private mode was disabled, the notebook viewer followed HTTP redirects without revalidating the destination host, enabling an unauthenticated SSRF to internal services. By chaining this with regex filter queries against an internal API and measuring response time differences, an attacker could infer secret values character by character. Exploitation required that private mode be disabled and that the attacker be able to chain the instance's open redirect endpoint through an external redirect to reach internal services. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.14.26, 3.15.21, 3.16.17, 3.17.14, 3.18.8, 3.19.5, and 3.20.1. This vulnerability was reported via the GitHub Bug Bounty program. |
