| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix address sanitizer warning in raid_resume
There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: ensure pages are unlocked on cow_file_range() failure
There is a hung_task report on zoned btrfs like below.
https://github.com/naota/linux/issues/59
[726.328648] INFO: task rocksdb:high0:11085 blocked for more than 241 seconds.
[726.329839] Not tainted 5.16.0-rc1+ #1
[726.330484] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[726.331603] task:rocksdb:high0 state:D stack: 0 pid:11085 ppid: 11082 flags:0x00000000
[726.331608] Call Trace:
[726.331611] <TASK>
[726.331614] __schedule+0x2e5/0x9d0
[726.331622] schedule+0x58/0xd0
[726.331626] io_schedule+0x3f/0x70
[726.331629] __folio_lock+0x125/0x200
[726.331634] ? find_get_entries+0x1bc/0x240
[726.331638] ? filemap_invalidate_unlock_two+0x40/0x40
[726.331642] truncate_inode_pages_range+0x5b2/0x770
[726.331649] truncate_inode_pages_final+0x44/0x50
[726.331653] btrfs_evict_inode+0x67/0x480
[726.331658] evict+0xd0/0x180
[726.331661] iput+0x13f/0x200
[726.331664] do_unlinkat+0x1c0/0x2b0
[726.331668] __x64_sys_unlink+0x23/0x30
[726.331670] do_syscall_64+0x3b/0xc0
[726.331674] entry_SYSCALL_64_after_hwframe+0x44/0xae
[726.331677] RIP: 0033:0x7fb9490a171b
[726.331681] RSP: 002b:00007fb943ffac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[726.331684] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9490a171b
[726.331686] RDX: 00007fb943ffb040 RSI: 000055a6bbe6ec20 RDI: 00007fb94400d300
[726.331687] RBP: 00007fb943ffad00 R08: 0000000000000000 R09: 0000000000000000
[726.331688] R10: 0000000000000031 R11: 0000000000000246 R12: 00007fb943ffb000
[726.331690] R13: 00007fb943ffb040 R14: 0000000000000000 R15: 00007fb943ffd260
[726.331693] </TASK>
While we debug the issue, we found running fstests generic/551 on 5GB
non-zoned null_blk device in the emulated zoned mode also had a
similar hung issue.
Also, we can reproduce the same symptom with an error injected
cow_file_range() setup.
The hang occurs when cow_file_range() fails in the middle of
allocation. cow_file_range() called from do_allocation_zoned() can
split the give region ([start, end]) for allocation depending on
current block group usages. When btrfs can allocate bytes for one part
of the split regions but fails for the other region (e.g. because of
-ENOSPC), we return the error leaving the pages in the succeeded regions
locked. Technically, this occurs only when @unlock == 0. Otherwise, we
unlock the pages in an allocated region after creating an ordered
extent.
Considering the callers of cow_file_range(unlock=0) won't write out
the pages, we can unlock the pages on error exit from
cow_file_range(). So, we can ensure all the pages except @locked_page
are unlocked on error case.
In summary, cow_file_range now behaves like this:
- page_started == 1 (return value)
- All the pages are unlocked. IO is started.
- unlock == 1
- All the pages except @locked_page are unlocked in any case
- unlock == 0
- On success, all the pages are locked for writing out them
- On failure, all the pages except @locked_page are unlocked |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size
On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.
The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.
The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).
[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166] <TASK>
[75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520] ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431] ? memcpy+0x4e/0x60
[75721.781931] split_leaf+0x433/0x12d0 [btrfs]
[75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300] ? lock_downgrade+0x7c0/0x7c0
[75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313] ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085] ? lock_release+0x552/0xf80
[75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886] ? __kasan_check_write+0x14/0x20
[75721.895152] ? do_raw_read_unlock+0x44/0x80
[75721.901323] ? _raw_write_lock_irq+0x60/0x80
[75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166] ? _raw_write_unlock+0x23/0x40
[75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906] ? try_to_wake_up+0x30/0x14a0
[75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661] ? rcu
---truncated--- |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.1002 and Application versions prior to 20.0.2614 (VA and SaaS deployments) contain multiple Docker containers that include outdated, end-of-life, unsupported, or otherwise vulnerable third-party components (examples: Nginx 1.17.x, OpenSSL 1.1.1d, various EOL Alpine/Debian/Ubuntu base images, and EOL Laravel/PHP libraries). These components are present across many container images and increase the product's attack surface, enabling exploitation chains when leveraged by an attacker. Multiple distinct EOL versions and unpatched libraries across containers; Nginx binaries date from 2019 in several images and Laravel versions observed include EOL releases (for example Laravel 5.5.x, 5.7.x, 5.8.x). This vulnerability has been identified by the vendor as: V-2024-014 — Outdated Dependencies. |
| Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, users were able to access the submissions made by other students The issue has been fixed in version 2.41.0 by ensuring proper roles and redirecting if accessed via direct URL. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not queue data on closed subflows
Dipanjan reported a syzbot splat at close time:
WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153
inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153
Modules linked in: uio_ivshmem(OE) uio(E)
CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE
5.19.0-rc6-g2eae0556bb9d #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153
Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91
f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b
e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d
RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00
RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002
RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000
R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400
R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258
FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0
Call Trace:
<TASK>
__sk_destruct+0x4f/0x8e0 net/core/sock.c:2067
sk_destruct+0xbd/0xe0 net/core/sock.c:2112
__sk_free+0xef/0x3d0 net/core/sock.c:2123
sk_free+0x78/0xa0 net/core/sock.c:2134
sock_put include/net/sock.h:1927 [inline]
__mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351
__mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828
mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586
process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289
worker_thread+0x623/0x1070 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
The root cause of the problem is that an mptcp-level (re)transmit can
race with mptcp_close() and the packet scheduler checks the subflow
state before acquiring the socket lock: we can try to (re)transmit on
an already closed ssk.
Fix the issue checking again the subflow socket status under the
subflow socket lock protection. Additionally add the missing check
for the fallback-to-tcp case. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: move subflow cleanup in mptcp_destroy_common()
If the mptcp socket creation fails due to a CGROUP_INET_SOCK_CREATE
eBPF program, the MPTCP protocol ends-up leaking all the subflows:
the related cleanup happens in __mptcp_destroy_sock() that is not
invoked in such code path.
Address the issue moving the subflow sockets cleanup in the
mptcp_destroy_common() helper, which is invoked in every msk cleanup
path.
Additionally get rid of the intermediate list_splice_init step, which
is an unneeded relic from the past.
The issue is present since before the reported root cause commit, but
any attempt to backport the fix before that hash will require a complete
rewrite. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: ops: Consistently treat platform_max as control value
This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.
There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.
Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
Actually check if the passed pointers are valid, before writing to them.
This also fixes a USBAN warning:
UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25
load of value 255 is not a valid value for type '_Bool'
This is because playback_only is uninitialized and is not written to, as
the playback-only property is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix io_req_prep_async with provided buffers
io_req_prep_async() can import provided buffers, commit the ring state
by giving up on that before, it'll be reimported later if needed. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl-qspi: use devm function instead of driver remove
Driver use devm APIs to manage clk/irq/resources and register the spi
controller, but the legacy remove function will be called first during
device detach and trigger kernel panic. Drop the remove function and use
devm_add_action_or_reset() for driver cleanup to ensure the release
sequence.
Trigger kernel panic on i.MX8MQ by
echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: brcmnand: fix PM resume warning
Fixed warning on PM resume as shown below caused due to uninitialized
struct nand_operation that checks chip select field :
WARN_ON(op->cs >= nanddev_ntargets(&chip->base)
[ 14.588522] ------------[ cut here ]------------
[ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8
[ 14.588553] Modules linked in: bdc udc_core
[ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16
[ 14.588590] Tainted: [W]=WARN
[ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree)
[ 14.588598] Call trace:
[ 14.588604] dump_backtrace from show_stack+0x18/0x1c
[ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c
[ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c
[ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c
[ 14.588653] r5:c08d40b0 r4:c1003cb0
[ 14.588656] dump_stack from __warn+0x84/0xe4
[ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194
[ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000
[ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8
[ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048
[ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150
[ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040
[ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54
[ 14.588735] r5:00000010 r4:c0840a50
[ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c
[ 14.588757] dpm_run_callback from device_resume+0xc0/0x324
[ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010
[ 14.588779] device_resume from dpm_resume+0x130/0x160
[ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0
[ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20
[ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414
[ 14.588826] r4:00000010
[ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8
[ 14.588848] r5:c228a414 r4:00000000
[ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc
[ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000
[ 14.588871] r4:00000003
[ 14.588874] pm_suspend from state_store+0x74/0xd0
[ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003
[ 14.588892] state_store from kobj_attr_store+0x1c/0x28
[ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250
[ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c
[ 14.588936] r5:c3502900 r4:c0d92a48
[ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0
[ 14.588956] r5:c3502900 r4:c3501f40
[ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420
[ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00
[ 14.588983] r4:c042a88c
[ 14.588987] vfs_write from ksys_write+0x74/0xe4
[ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00
[ 14.589008] r4:c34f7f00
[ 14.589011] ksys_write from sys_write+0x10/0x14
[ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004
[ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c
[ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0)
[ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001
[ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78
[ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8
[ 14.589065] ---[ end trace 0000000000000000 ]---
The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when
doing PM resume operation in compliance with the controller support for single
die nand chip. Switching from nand_reset_op() to nan
---truncated--- |
| A serious authentication flaw allowed attackers with valid credentials to bypass multi-factor authentication under certain conditions, potentially compromising user accounts. |
| Moodle exposed the names of hidden groups to users who had permission to create calendar events but not to view hidden groups. This could reveal private or restricted group information. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
The idxd_cleanup() helper cleans up perfmon, interrupts, internals and
so on. Refactor remove call with the idxd_cleanup() helper to avoid code
duplication. Note, this also fixes the missing put_device() for idxd
groups, enginces and wqs. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/eventpoll: fix endless busy loop after timeout has expired
After commit 0a65bc27bd64 ("eventpoll: Set epoll timeout if it's in
the future"), the following program would immediately enter a busy
loop in the kernel:
```
int main() {
int e = epoll_create1(0);
struct epoll_event event = {.events = EPOLLIN};
epoll_ctl(e, EPOLL_CTL_ADD, 0, &event);
const struct timespec timeout = {.tv_nsec = 1};
epoll_pwait2(e, &event, 1, &timeout, 0);
}
```
This happens because the given (non-zero) timeout of 1 nanosecond
usually expires before ep_poll() is entered and then
ep_schedule_timeout() returns false, but `timed_out` is never set
because the code line that sets it is skipped. This quickly turns
into a soft lockup, RCU stalls and deadlocks, inflicting severe
headaches to the whole system.
When the timeout has expired, we don't need to schedule a hrtimer, but
we should set the `timed_out` variable. Therefore, I suggest moving
the ep_schedule_timeout() check into the `timed_out` expression
instead of skipping it.
brauner: Note that there was an earlier fix by Joe Damato in response to
my bug report in [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().
It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().
Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: cm3605: Fix an error handling path in cm3605_probe()
The commit in Fixes also introduced a new error handling path which should
goto the existing error handling path.
Otherwise some resources leak. |
| In the Linux kernel, the following vulnerability has been resolved:
md: call __md_stop_writes in md_stop
From the link [1], we can see raid1d was running even after the path
raid_dtr -> md_stop -> __md_stop.
Let's stop write first in destructor to align with normal md-raid to
fix the KASAN issue.
[1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a |
