Export limit exceeded: 36333 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (4902 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90309 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold CQ references when processing EQ events EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or error callbacks outside the xarray lock. erdma_destroy_cq() can erase the CQ from the xarray and free its queue buffer and doorbell record while a previously scheduled EQ handler is still using the CQ. Add a CQ refcount and take a reference under the xarray lock with refcount_inc_not_zero(). Remove the CQ from the xarray before dropping the destroy-path reference, then wait for in-flight EQ users before releasing CQ resources. | ||||
| CVE-2026-90159 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME. | ||||
| CVE-2026-90167 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize oplock close with pending break ownership close may abort an in-flight oplock break while another breaker already holds an opinfo reference. Releasing pending_break wakes that waiter, but without serializing the close transition with bit acquisition it can become a new break owner through the test_and_set_bit() fast path. It can then overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for a dying opinfo. Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode list. Serialize that transition, pending_break acquisition, and OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses the race releases its ownership and returns -ENOENT. Explicitly wake pending_break waiters during close so they can observe the terminal state. Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with OPLOCK_STATE_NONE. | ||||
| CVE-2026-90131 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize resident iomap reads with mrec_lock ntfs_read_iomap_begin_resident() walks the MFT record through ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock, while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer under that lock. map_mft_record() only takes a reference and does not serialize, so the reader can observe torn attribute length and offset fields while a writer is relocating the records. KCSAN reports the race between the mmap read fault path and both link() and unlink(): BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1: ntfs_attr_record_resize+0xd2/0x130 ntfs_attr_record_rm+0xad/0x530 ntfs_delete+0x224/0x640 ntfs_unlink+0x14d/0x280 vfs_unlink+0x157/0x520 read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0: ntfs_attr_find+0x104/0x5b0 ntfs_attr_lookup+0x39c/0x10c0 ntfs_read_iomap_begin_resident+0xc6/0x230 ntfs_read_iomap_begin+0x5d/0xa0 iomap_iter+0x2e2/0x6e0 iomap_read_folio+0x147/0x2a0 ntfs_read_folio+0x108/0x170 filemap_read_folio+0x35/0x100 filemap_fault+0x993/0x1000 value changed: 0x00000250 -> 0x000001f0 The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change is the 96 bytes of one $FILE_NAME attribute being removed. Keep base_ni->mrec_lock from the resident read iomap lookup through iomap_end(). This protects both the attribute walk and the subsequent copy from iomap->inline_data, which points into the MFT record. The non-resident path is left alone: ntfs_lookup() already holds the directory inode's mrec_lock when it reads an index folio through read_mapping_folio(), and taking the lock in the shared wrapper deadlocks there with recursive locking on mrec_lock. The comment above the read_mapping_folio() call in fs/ntfs/dir.c notes the same hazard. The seek path uses the same lookup helper but does not dereference iomap->inline_data. Release the lock before returning from that path, whereas the regular read path records base_ni in iomap->private and releases the lock from its iomap_end() callback. Tested with a reproducer that faults in a 16-byte resident file while another thread runs link()/unlink() on it. Before: 40 KCSAN reports in about one second. After: no reports in 180 seconds over 206,090 read iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no lockdep splat with the same reproducer running for 60 seconds. | ||||
| CVE-2026-90371 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RXDMAD_C buffer recycling race The RXDMAD_C buffers come from the RRO data queues' page pools, which are bound to a different NAPI, so the direct page-pool recycle used here could race the owning NAPI; take the non-direct path as is already done for WED RX queues. | ||||
| CVE-2026-90190 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: null_blk: use DEFINE_MUTEX for the file-scope mutex In null_init(), mutex_init(&lock) currently happens after configfs_register_subsystem(), which exposes the nullb subsystem to userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is initialized, trigger warning: [ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301 [ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 ...... [ 123.154926] Call Trace: [ 123.155172] <TASK> [ 123.155419] ? __pfx_mutex_lock+0x10/0x10 [ 123.156181] ? __pfx__raw_spin_lock+0x10/0x10 [ 123.156571] nullb_group_make_group+0x20/0x100 [null_blk] [ 123.157011] configfs_mkdir+0x47b/0xc70 [ 123.157337] ? __pfx_configfs_mkdir+0x10/0x10 [ 123.157719] ? may_create_dentry+0x242/0x2e0 [ 123.158061] vfs_mkdir+0x2a9/0x6c0 [ 123.158352] filename_mkdirat+0x3dc/0x500 [ 123.158710] ? __pfx_filename_mkdirat+0x10/0x10 [ 123.159070] ? strncpy_from_user+0x3a/0x1d0 [ 123.159413] __x64_sys_mkdir+0x6b/0x90 [ 123.159760] do_syscall_64+0xea/0x600 Replace the runtime mutex_init(&lock) with a static DEFINE_MUTEX(lock) declaration to fix this issue. | ||||
| CVE-2026-90184 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to change the configuration of a live device by testing NULLB_DEV_FL_CONFIGURED, but that flag is only set by nullb_device_power_store() after null_add_dev() has returned, and the store methods take no lock at all. configfs only serializes writes to the same open file (buffer->mutex), so a write to any attribute can run concurrently with null_add_dev() and change the device configuration while it is being used. null_add_dev() reads the configuration several times, e.g. dev->zoned is read once to set up the queue limits and once to initialize the zone resources: CPU0: echo 1 > nullb0/power CPU1: echo 1 > nullb0/zoned nullb_device_power_store() mutex_lock(&lock) null_add_dev() if (dev->zoned) -> false /* no BLK_FEAT_ZONED */ nullb_device_zoned_store() test_bit(FL_CONFIGURED) -> 0 dev->zoned = true blk_mq_alloc_disk() /* queue is not zoned */ if (nullb->dev->zoned) -> true null_register_zoned_dev() blk_revalidate_disk_zones() blk_revalidate_disk_zones() is then called for a queue that does not have BLK_FEAT_ZONED set, which triggers its WARN_ON_ONCE() and fails the device setup with -EIO: WARNING: CPU: 2 PID: 322 at block/blk-zoned.c:2357 blk_revalidate_disk_zones+0x4c/0x560 Clearing dev->zoned in the same window is worse: the queue is created with BLK_FEAT_ZONED but the zone resources are never initialized, so add_disk() succeeds for a zoned disk that has no zones. And a store that lands after the last dev->zoned test leaves dev->zoned set while dev->zones is still NULL, which null_process_zoned_cmd() dereferences on the first write. Fix this by taking the global lock, which nullb_device_power_store() already holds across null_add_dev() and null_del_dev(), around both the NULLB_DEV_FL_CONFIGURED test and the update of the device configuration. The submit_queues and poll_queues apply callbacks are now called with that lock held, so remove the locking they did themselves. Since the store methods can run as soon as configfs_register_subsystem() returns, that is, before null_init() gets to mutex_init(&lock), also initialize the lock statically with DEFINE_MUTEX(). | ||||
| CVE-2026-90193 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler qcom_cpucp_mbox_irq_fn() calls mbox_chan_received_data() while holding chan->lock. Under PREEMPT_RT, spin_lock_irqsave() is converted to an rt_spinlock (rtmutex-based), which tracks ownership and can sleep. The callback chain triggered by mbox_chan_received_data() eventually reaches mailbox_clear_channel() -> mbox_send_message() -> add_to_rbuf(), which attempts to re-acquire the same chan->lock. Since rtmutex detects the re-entrant lock attempt by the same owner, the thread blocks waiting for a lock it already holds, causing a permanent deadlock. This deadlock manifests as 'irq/N-apss_cpucp_mbox' stuck in D state with the following call trace: rt_spin_lock -> mbox_send_message -> mailbox_clear_channel -> scmi_rx_callback -> mbox_chan_received_data [<- held chan->lock here] Fix by saving chan->cl locally and clearing the HW interrupt register inside the lock, then invoking mbox_chan_received_data() after releasing the lock. This preserves the mutual exclusion for chan->cl access while avoiding the lock re-entrancy that causes the PREEMPT_RT deadlock. | ||||
| CVE-2026-90207 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize input teardown with event_input snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event leaving it running after rawmidi_release_priv() has set rfile->rmidi to NULL which leads to: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0 Call trace: snd_midi_input_event+0x3c/0x134 [snd_seq_midi] (P) snd_rawmidi_input_event_work+0x1c/0x2c process_one_work+0x150/0x3a4 worker_thread+0x190/0x318 Apply a similar approach to commit ef7607ab1c8ad ("ALSA: seq: midi: Serialize output teardown with event_input") which fixed the same issue in the output direction, but updated to use RCU following Takashi Iwai's proposed follow-on patch [1]. With this change in place, midisynth_unsubscribe() clears the input file so snd_midi_input_event() will not re-trigger the stream and will be quiesced by the cancel_work_sync() in snd_rawmidi_input_trigger(). [1] https://lore.kernel.org/linux-sound/20260813144224.753399-1-tiwai@suse.de/ | ||||
| CVE-2026-92067 | 1 Mozilla | 1 Firefox | 2026-09-20 | 8.8 High |
| Use-after-free in the Widget: Gtk component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. | ||||
| CVE-2026-92042 | 1 Mozilla | 1 Firefox | 2026-09-20 | 7.5 High |
| Race condition in the DOM: Content Processes component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. | ||||
| CVE-2026-90235 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE xprtsock replaces and restores sk->sk_data_ready and sk->sk_write_space on live sockets with plain stores, and xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain load. These callback pointers are shared with generic socket and protocol paths that may read or invoke them concurrently, so xprtsock needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract that the validated 4022 family applied elsewhere. When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later restores the lower-socket callbacks during teardown, another CPU may still hold an earlier callback snapshot. The plain replace/restore pattern leaves the same visibility hole as the validated 4022 family, so a stale snapshot can still invoke xs_data_ready() or xs_udp_write_space() after the live callback fields have already been restored to the lower-socket handlers. Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space stores in xs_local_finish_connecting(), xs_udp_finish_connecting(), xs_tcp_finish_connecting(), and xs_restore_old_callbacks(). Use READ_ONCE() for the direct sk_write_space invocation in xs_udp_do_set_buffer_size(). This matches the required callback visibility contract while leaving adjacent sk_state_change and sk_error_report handling unchanged. | ||||
| CVE-2026-90243 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down copied context entry copied_context_tear_down() zeroes the 128-bit context entry with context_clear_entry() while the Present bit is still set, and only then issues the context-cache and IOTLB invalidations. This leaves a window in which hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behaviour or spurious faults. While x86 provides strong write ordering, the compiler may reorder the writes to the two 64-bit halves of the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. There is no cacheline flush before the invalidation either, so on an IOMMU without coherent access to the context table the zeroed entry may not be visible to hardware at the point the invalidation is submitted. Apply the same ownership handshake described in the VT-d spec, Section 6.5.3.3 ("Guidance to Software for Invalidations"): clear only the Present bit, flush it out to the IOMMU, perform the invalidations, and only then zero the remainder of the entry. | ||||
| CVE-2026-92485 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', the trampoline will fail to restore the prog's nop insn using call insn. [ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98 ... [ 3.428793] bpf_link_free+0x58/0x130 [ 3.429293] bpf_link_release+0x23/0x30 Fix the warning by updating 'tr->flags' with '|=' and lock. | ||||
| CVE-2026-90401 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md: remove REQ_NOWAIT support from raid1/10/456 REQ_NOWAIT support in md personalities that can block internally is fundamentally incomplete. While reads can avoid some blocking paths, write requests can still encounter cases where one mirror succeeds while another returns -EAGAIN. At that point md cannot distinguish queue pressure from a real device failure, so it can neither record a bad block nor safely retry the write without REQ_NOWAIT, leaving mirrors with divergent data. Rather than continue advertising REQ_NOWAIT support for personalities that cannot implement it correctly, remove it from raid1, raid10 and raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to their underlying devices; stacked limits will still clear the feature if any component device lacks REQ_NOWAIT support. | ||||
| CVE-2026-90429 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also returns idx to the IDA before clearing the slot, so a concurrent create that reuses idx can publish its new vintf into the slot, only for this teardown to erase it again with the stale NULL store. On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of a published vintf such as vintf->base. A plain store gives no ordering on a weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make the ISR pick a vintf the moment it is published, before its fields are set or tegra241_vintf_hw_init() runs. The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures() first creates VINTF0, so the slot 0 read needs the same NULL check. Publish every slot with an smp_store_release(), and read each slot in the ISR with an smp_load_acquire() under a NULL check, so the ISR always sees a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and synchronize_irq() prior to returning idx to the IDA, so no vintf is freed under a running handler and no reused idx is clobbered. | ||||
| CVE-2026-93203 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid CRC corruption due to parallel claim add batadv_bla_add_claim() is used to add claims and modify the backbone of claims for CLAIM frames from remote backbones and local packets. When it handles a claim, it needs to either * add the new claim's CRC to the backbone CRC * remove the already existing claim's CRC from the old backbone and add it to the new backbone But when the "new" claim code was running in parallel to the "change backbone" code, it can happen that the CRC was invalid because the backbone_gw of the claim was changed twice in the "new" claim code path: * CPU0 creates the claim for gateway A and publishes it in the claim hash. The crc16 of the address has not yet been added to A's crc at this point. * CPU1 processes a claim frame of gateway B for the same client, finds the just published claim, and performs the ownership change: it switches the pointer to B, removes the crc16 from A's crc - which never contained it - and adds it to B's crc. * CPU0 continues behind the creation branch, unconditionally switches the pointer back to A without compensating B's crc (its remove_crc is false for the creation path), and finally adds the crc16 to A's crc The CRC is then wrong for both: * claim belongs to A: but CRC is not part of backbone A's CRC * claim doesn't belong to B: CRC is still part of backbone B's CRC This wrong CRC is never recomputated from the stored claims. For local backbone claims, this can also not recovered using syncs. To avoid this, split the functionality in clear separate parts: * new claim which always adds claim CRC to the backbone CRC (but never changes the already set backbone_gw of the claim back) * update of existing claim which automatically changes the backbone_gw entry and only updates both backbone CRCs when there was an actual change | ||||
| CVE-2026-93589 | 1 Imagemagick | 1 Imagemagick | 2026-09-19 | 3.7 Low |
| ImageMagick before 7.1.2-31 and 6.9.13-56 contains a division-by-zero flaw in the FLIF encoder. An incorrect value for ticks per second in the image being encoded causes a divide-by-zero and crashes the encoder, resulting in a denial of service. The issue is fixed in 7.1.2-31 and 6.9.13-56. | ||||
| CVE-2026-90224 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix double completion race in nci_data_exchange_complete nci_close_device() and nci_rx_work can both call nci_data_exchange_complete() concurrently. After commit 4527025d440ce8 ("nfc: nci: fix circular locking dependency in nci_close_device") moved flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock), rx_work is no longer serialized with the explicit completion call in the close path. Both callers read the non-NULL callback pointer and invoke rawsock_data_exchange_complete(), which calls sock_put() -- but only one sock_hold() was taken, so the second sock_put() underflows the refcount and frees the socket while it is still in use. Replace the bare clear_bit(NCI_DATA_EXCHANGE) with test_and_clear_bit() so that only the first caller proceeds to invoke the callback. | ||||
| CVE-2026-86424 | 1 Imagemagick | 1 Imagemagick | 2026-09-19 | 2.5 Low |
| ImageMagick before 7.1.2-30 and 6.9.13-55 contains a time-of-check-time-of-use (TOCTOU) vulnerability in the video decoder that allows attackers to bypass path policy write restrictions via symlink swaps. An attacker can replace a symlink between policy validation (check-time) and the file write operation (use-time) to write to policy-denied locations. | ||||