| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Denial-of-service in the Audio/Video component. This vulnerability was fixed in Firefox 156 and Thunderbird 156. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds. |
| NUUO Network Video Recorder 2.0.0 is vulnerable to Command Injection in handle_import_privilege.php. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the DHCP parser in rust/src/dhcp/dhcp.rs creates stateless transactions without recording their packet direction with AppLayerTxData::for_direction(), so a sensor that observes only one direction cannot mark the unseen direction inspected or free completed transactions. The RDP parser in rust/src/rdp/rdp.rs has the same direction-state defect. The per-flow transaction list can grow without bound and cleanup repeatedly scans it, causing increasing CPU and memory consumption and eventual denial of service. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 7.0.0 until 7.0.17 and 8.0.6, the MQTT parser in rust/src/mqtt/mqtt.rs permits repeated PUBREC or PUBREL messages to be appended to one transaction without a limit. Crafted MQTT traffic can grow transaction state indefinitely, consuming CPU and memory and causing slowdown or denial of service. This issue is fixed in versions 8.0.6 and 7.0.17. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20325 are related to improper neutralization of special elements used in a command issue that are grouped under the Common Weakness Enumeration (CWE) CWE-77. |
| A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain system-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| Autobahn Python is a WebSocket and WAMP implementation for Python that supports Twisted and asyncio. Prior to 26.7.1, WebSocket endpoints that accept permessage-deflate and rely on maxMessagePayloadSize enforce that limit against the compressed frame length before inflation but do not recheck the decompressed message size before delivery. A remote unauthenticated client can send a valid compressed frame below the configured wire-size limit that expands beyond the application message limit, causing oversized data to be allocated, joined, validated, and passed to application callbacks. This can create resource-exhaustion pressure, but the advisory does not establish confidentiality or integrity impact. This issue is fixed in version 26.7.1. |
| libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.1 and earlier, crafted grid, iovl, and iden reference graphs can repeatedly decode the same base image because processed_ids is copied per branch and ImageItem::decode_image() has no shared operation budget. This vulnerability is fixed in 1.23.2. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
The IIO core does not filter duplicate writes to the event enable
attribute, so writing the same value twice invokes
write_event_config() twice. Enabling twice leaks a runtime PM
reference, preventing the device from ever suspending again;
disabling twice underflows the usage count and triggers a
"Runtime PM usage count underflow" warning.
Bail out early when the requested state matches the current state.
While at it, switch to pm_runtime_resume_and_get() so a failed
resume is propagated to userspace instead of silently marking the
event enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix FF device cleanup on init failure
hidpp_ff_init() creates the input force-feedback device with
input_ff_create(), then allocates the HID++ FF private data,
effect ID array, and workqueue.
If any of those allocations fail after input_ff_create() succeeds,
the function returns an error without destroying the FF device.
Add an unwind path that frees the private allocations made by
hidpp_ff_init() and calls input_ff_destroy() for failures after
input_ff_create() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: release zisofs block pointer buffer head
zisofs_fill_pages() reads the compressed block pointer table. The error
paths release the current buffer_head, the loop also releases the old
buffer_head when it advances. However, the success path leaves the last
buffer_head referenced. Release it before returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Clean up channels on setup failure
scmi_channels_setup() can fail after the common BASE channel or earlier
protocol channels have already been registered in the TX/RX IDRs.
Route this failure through the existing channel cleanup label so the
transport channels, transport devices and IDR state created before the
failure are released before the probe error path frees the SCMI instance
ID. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during early boot, real
module unload of a clk driver that owns GDSCs, or an OF-overlay tear-
down) the next gdsc_init() will end up trying to re-register a name
that is still in the list and pm_genpd_init() returns -EEXIST.
While we are here, flip the order so the consumer-facing OF provider
entry is the first thing removed -- otherwise a fresh
of_genpd_get_from_provider() call racing with the teardown could
attach to a domain that is mid-removal.
Iterate the scs[] array and pm_genpd_remove() each registered domain
after the subdomain links are torn down. The regulators stay devm-
managed (devm_regulator_get_optional() in gdsc_register()), so the
release happens automatically when the underlying device is unbound;
just the genpd accounting needs to be undone explicitly. |
| A vulnerability was found in O-RAN-SC SMO OAM 2025-06-10. Affected by this vulnerability is an unknown functionality of the component VES Collector. Performing a manipulation results in allocation of resources. The attack may be initiated remotely. The exploit has been made public and could be used. The project was informed of the problem early through a bug report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release the folio batch on iomap callback failures
A sashiko review of an unrelated patch points out that the folio
batch mechanism used for iomap zero range fails to release the batch
in a couple error scenarios. If either calls to ->iomap_end() or
->iomap_begin() fail, the direct return paths bypass the batch
cleanup.
The ->iomap_end() case is not a practical issue at the moment
because there is no user of the mechanism that returns an error from
this path. The ->iomap_begin() case is theoretically possible
because XFS can invoke the fill helper and error out at various
points thereafter. This subtly complicates things because XFS does
not transfer iomap_flags to the iomap data structure in the error
path.
To deal with both of these issues, first make sure to invoke the
cleanup helper in the error path for either fs callback. Second,
update the helper to clear the flag unconditionally and release the
batch so long as it is populated. This more clearly delineates the
purpose of the flag to control the I/O path and not necessarily the
status of the fbatch, so add a comment around this as well. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix dio leak on metadata mapping error
A failed integrity mapping holds a dio reference, so we need to go
through the full bio ending in case there were previously submitted
bio's in the sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
fat: release buffer head after rebuilding parent
fat_scan_logstart() leaves the matching directory entry's buffer head in
sinfo.bh for the caller to release, just like fat_scan().
fat_rebuild_parent() uses the directory entry to rebuild the parent inode
for the nostale_ro NFS export path, but does not release sinfo.bh after a
successful scan. Release it once fat_build_inode() has consumed the
directory entry data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: clean up color-change beacon data on errors
nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next
template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies.
A parsing failure returned directly instead of using the out: cleanup,
leaking any allocations completed before the error.
Allocate the nested attribute table before parsing beacon_next. Its
allocation failure can then return before beacon data exists, while a
later parsing failure uses out: to release the parsed data. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix request buffer leak in smb2_new_read_req()
smb2_new_read_req() allocates the request buffer with
smb2_plain_req_init() but only publishes it to the caller with
*buf = req at the very end of the function. Two error returns sit in
between:
rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server,
(void **) &req, total_len);
if (rc)
return rc;
if (server == NULL)
return -ECONNABORTED;
[...]
rdata->mr = smbd_register_mr(server->smbd_conn,
&rdata->subreq.io_iter,
true, need_invalidate);
if (!rdata->mr)
return -EAGAIN;
On either of them the buffer is neither released nor handed back, so
it is leaked. The caller cannot clean up after it: smb2_async_readv()
does 'goto out' on a non-zero return, which skips the
cifs_small_buf_release(buf) at async_readv_out, and buf has not been
assigned at that point in any case.
The write path has never had this problem. smb2_async_writev()
registers the memory region inline and jumps to its release label
instead of returning:
wdata->mr = smbd_register_mr(...);
if (!wdata->mr) {
rc = -EAGAIN;
goto async_writev_out;
}
Commit b7972092199f ("cifs: smbd: Retry on memory registration
failure") changed both sides from -ENOBUFS to -EAGAIN in a single
patch, which puts the two shapes next to each other.
Only the -EAGAIN return is reachable in practice, because
smb2_plain_req_init() calls smb2_reconnect() first and that already
fails with -EIO when server is NULL, before anything is allocated.
Both returns are given the same treatment here rather than leaving
one of them correct only by accident.
Because -EAGAIN is a replayable error, the failure also reaches the
retry block at the end of smb2_async_readv(), which marks the
subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be
retried rather than ending the I/O, and every attempt that reaches it
leaks another buffer. smb2_should_replay() short-circuits on
tcon->retry, so on a hard mount the attempt count is not bounded by
the retrans setting.
Only the asynchronous read path is affected. The synchronous
SMB2_read() caller passes rdata == NULL and the memory registration
block is guarded on rdata.
The memory registration failure path was pointed out by the Sashiko
AI reviewer while it was reviewing an unrelated patch to
smb2_async_readv(). |
