Export limit exceeded: 401033 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89545 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: defer rq_argp and rq_resp free until after RCU grace period svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously via kfree(), but defers the rqstp struct free via kfree_rcu(). After svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is a window where RCU readers that started before list_del_rcu() can still traverse the thread list and find the rqstp. These readers (e.g. nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has already been freed — a use-after-free. Fix this by moving the kfree of rq_argp and rq_resp into an explicit call_rcu() callback alongside the struct free. Resources not accessed by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain synchronously freed. | ||||
| CVE-2026-89544 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gssx_dec_option_array error path bugs Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time. | ||||
| CVE-2026-89543 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir Normal client creation goes through rpc_setup_pipedir(), which records clnt->pipefs_sb, but the mount-event path in __rpc_clnt_handle_event() calls rpc_setup_pipedir_sb() directly and never refreshes that field. The umount path also removes the directory without clearing clnt->pipefs_sb. After a late pipefs mount or any remount, rpc_clnt_remove_pipedir() compares the current superblock against a stale pipefs_sb pointer and skips cleanup, leaving pipefs dentries whose inode private data still points at a freed rpc_clnt, leading to a potential use-after-free during subsequent rpc_info_open() or rpc_show_info() calls. Fix this by properly updating clnt->pipefs_sb upon mount events and clearing it during unmount or failure paths. | ||||
| CVE-2026-89535 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id svc_rdma_free() caches rdma->sc_cm_id->device before teardown, then calls rdma_destroy_id(sc_cm_id) which frees the cm_id. rpcrdma_rn_unregister() follows, but between those two calls the transport's sc_rn entry is still installed in the device's rd_xa. A concurrent ib_unregister_device walk can dispatch svc_rdma_xprt_done() against the now-freed sc_cm_id. Move rpcrdma_rn_unregister() before rdma_destroy_id() so the transport's notification entry is removed from the xarray before the cm_id it references is destroyed. Also guard the sc_cm_id dereference with a NULL check: the following patches introduce paths that reach svc_rdma_free() with sc_cm_id == NULL (listener create failure, ADDR_CHANGE replacement failure). | ||||
| CVE-2026-89492 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate directory-index entry counts when reading metadata ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted. Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array. de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80945 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - unmap dst before software fallback on decompress On a hardware analytics error, decompress retries through the software fallback, which writes req->dst with the CPU while it is still mapped DMA_FROM_DEVICE. With SWIOTLB active the later dma_unmap_sg() copies the stale bounce buffer over req->dst, corrupting the result. Unmap before the fallback runs. The async path unmaps inline; the sync path signals the retry with -EAGAIN so iaa_comp_adecompress() runs the fallback after unmapping. | ||||
| CVE-2026-80860 | 1 Linux | 1 Linux Kernel | 2026-09-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix race between interrupt and resend After commit f8fce75fedf7 ("fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req") the WARN_ON(!list_empty(&req->intr_entry)) in fuse_request_free() still triggers due to the following race: In request_wait_answer() if (test_bit(FR_SENT, &req->flags)) -> returns true In fuse_chan_resend() clear_bit(FR_SENT, &req->flags) In request_wait_answer() queue_interrupt(req) Fix by: - move clearing FR_SENT inside fpq->lock - move setting FR_PENDING inside fiq->lock - recheck FR_SENT after acquiring fiq->lock in fuse_dev_queue_interrupt() | ||||
| CVE-2026-80847 | 1 Linux | 1 Linux Kernel | 2026-09-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: clamp route advmss to TCP_MIN_MSS tcp_select_initial_window() assumes that callers never pass an MSS smaller than 1, but route-derived advmss values can violate that assumption. A too-small explicit RTAX_ADVMSS is one way to get there, but it is not the only one. The same divide-by-zero can also be reached through the "default advmss" path when RTAX_ADVMSS is left at 0 and the effective advmss is later driven down by route MTU and min_adv_mss. Introduce a tcp_dst_advmss() helper that clamps route advmss to TCP_MIN_MSS before TCP consumes it, and use it in the TCP paths that derive advmss from dst metrics. This keeps the effective MSS from dropping to zero before tcp_select_initial_window() rounds the receive window. | ||||
| CVE-2026-74735 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. | ||||
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-72494 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose. | ||||
| CVE-2026-72438 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending and barrier reference leaks on discard failures raid10_make_request() acquires a writes_pending reference with md_write_start() before calling raid10_handle_discard(). Several failure paths in raid10_handle_discard() complete the bio and return without releasing the corresponding reference, causing md_write_end() to be skipped. Call md_write_end() before returning from these failure paths to keep writes_pending accounting balanced. Additionally, discard split allocation failures can occur after wait_barrier() succeeds. Those paths return without calling allow_barrier(), leaking the associated barrier reference. Release the barrier before returning from those paths. | ||||
| CVE-2026-72355 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix barriering when walking subrequest list Fix the barriering used when walking the subrequest list in retry as there's a possibility of seeing a subreq that's just been added by the application thread. | ||||
| CVE-2026-68337 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redirect(). Previous behaviour was a crash, so nothing regresses by not supporting it. | ||||
| CVE-2026-68303 | 1 Linux | 1 Linux Kernel | 2026-09-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hvs/v3d: Fix null dereference in unbind The hvs and v3d drivers use dev_get_drvdata(master) in their unbind functions. Since the vc4-drm gets removed before its dependent drivers (vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to get drvdata of its master and fails with a null dereference error. Use the data pointer passed to the unbind functions directly instead of dev_get_drvdata(master). This avoids using potentially freed memory. | ||||
| CVE-2023-20193 | 1 Cisco | 1 Identity Services Engine | 2026-09-21 | 6 Medium |
| A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec. | ||||
| CVE-2026-93377 | 1 Google | 1 Chrome | 2026-09-21 | 8.8 High |
| Type confusion in V8 in Google Chrome prior to 153.0.8010.52 allowed a remote attacker leveraging social engineering to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-93376 | 1 Google | 1 Chrome | 2026-09-21 | 6.3 Medium |
| Out of bounds read in DataTransfer in Google Chrome prior to 153.0.8010.52 allowed a local attacker leveraging social engineering to read memory outside the sandbox via a local program. (Chromium security severity: Medium) | ||||
| CVE-2026-20350 | 1 Cisco | 1 Thousandeyes Enterprise Agent | 2026-09-21 | 4.7 Medium |
| A vulnerability in the web-based management interface of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to inject arbitrary operating system commands. This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by saving configuration details that contain malicious values. A successful exploit could allow the attacker to execute arbitrary operating system commands with root privileges. To exploit this vulnerability, the attacker must have valid administrative credentials. | ||||