| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ironic-image is an OpenStack Ironic deployment packaged and configured by Metal3. When the reverse proxy mode is enabled by the `IRONIC_REVERSE_PROXY_SETUP` variable set to `true`, 1) HTTP basic credentials are validated on the HTTPD side in a separate container, not in the Ironic service itself and 2) Ironic listens in host network on a private port 6388 on localhost by default. As a result, when the reverse proxy mode is used, any Pod or local Unix user on the control plane Node can access the Ironic API on the private port without authentication. A similar problem affects Ironic Inspector (`INSPECTOR_REVERSE_PROXY_SETUP` set to `true`), although the attack potential is smaller there. This issue affects operators deploying ironic-image in the reverse proxy mode, which is the recommended mode when TLS is used (also recommended), with the `IRONIC_PRIVATE_PORT` variable unset or set to a numeric value. In this case, an attacker with enough privileges to launch a pod on the control plane with host networking can access Ironic API and use it to modify bare-metal machine, e.g. provision them with a new image or change their BIOS settings. This vulnerability is fixed in 24.1.1. |
| When following an HTTP redirect to a domain which is not a subdomain match or exact match of the initial domain, an http.Client does not forward sensitive headers such as "Authorization" or "Cookie". For example, a redirect from foo.com to www.foo.com will forward the Authorization header, but a redirect to bar.com will not. A maliciously crafted HTTP redirect could cause sensitive headers to be unexpectedly forwarded. |
| An incomplete fix was shipped for the Rapid Reset (CVE-2023-44487/CVE-2023-39325) vulnerability for an OpenShift Containers. |
| A flaw was found in NetworkManager. When a system running NetworkManager with DEBUG logs enabled and an interface eth1 configured with LLDP enabled, a malicious user could inject a malformed LLDP packet. NetworkManager would crash, leading to a denial of service. |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| A flaw was found in ose-openshift-apiserver. This vulnerability allows internal network enumeration, service discovery, limited information disclosure, and potential denial-of-service (DoS) through Server-Side Request Forgery (SSRF) due to missing IP address and network-range validation when processing user-supplied image references. |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. |
| An issue was found in the CPython `tempfile.TemporaryDirectory` class affecting versions 3.12.1, 3.11.7, 3.10.13, 3.9.18, and 3.8.18 and prior.
The tempfile.TemporaryDirectory class would dereference symlinks during cleanup of permissions-related errors. This means users which can run privileged programs are potentially able to modify permissions of files referenced by symlinks in some circumstances.
|
| ws is an open source WebSocket client and server for Node.js. A request with a number of headers exceeding theserver.maxHeadersCount threshold could be used to crash a ws server. The vulnerability was fixed in ws@8.17.1 (e55e510) and backported to ws@7.5.10 (22c2876), ws@6.2.3 (eeb76d3), and ws@5.2.4 (4abd8f6). In vulnerable versions of ws, the issue can be mitigated in the following ways: 1. Reduce the maximum allowed length of the request headers using the --max-http-header-size=size and/or the maxHeaderSize options so that no more headers than the server.maxHeadersCount limit can be sent. 2. Set server.maxHeadersCount to 0 so that no limit is applied. |
| Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic.
This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1. |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. The `BareMetalHost` (BMH) CRD allows the `userData`, `metaData`, and `networkData` for the provisioned host to be specified as links to Kubernetes Secrets. There are fields for both the `Name` and `Namespace` of the Secret, meaning that versions of the baremetal-operator prior to 0.8.0, 0.6.2, and 0.5.2 will read a `Secret` from any namespace. A user with access to create or edit a `BareMetalHost` can thus exfiltrate a `Secret` from another namespace by using it as e.g. the `userData` for provisioning some host (note that this need not be a real host, it could be a VM somewhere).
BMO will only read a key with the name `value` (or `userData`, `metaData`, or `networkData`), so that limits the exposure somewhat. `value` is probably a pretty common key though. Secrets used by _other_ `BareMetalHost`s in different namespaces are always vulnerable. It is probably relatively unusual for anyone other than cluster administrators to have RBAC access to create/edit a `BareMetalHost`. This vulnerability is only meaningful, if the cluster has users other than administrators and users' privileges are limited to their respective namespaces.
The patch prevents BMO from accepting links to Secrets from other namespaces as BMH input. Any BMH configuration is only read from the same namespace only. The problem is patched in BMO releases v0.7.0, v0.6.2 and v0.5.2 and users should upgrade to those versions. Prior upgrading, duplicate the BMC Secrets to the namespace where the corresponding BMH is. After upgrade, remove the old Secrets. As a workaround, an operator can configure BMO RBAC to be namespace scoped for Secrets, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces. |
| Vite a frontend build tooling framework for javascript. Affected versions of vite were discovered to contain a DOM Clobbering vulnerability when building scripts to `cjs`/`iife`/`umd` output format. The DOM Clobbering gadget in the module can lead to cross-site scripting (XSS) in web pages where scriptless attacker-controlled HTML elements (e.g., an img tag with an unsanitized name attribute) are present. DOM Clobbering is a type of code-reuse attack where the attacker first embeds a piece of non-script, seemingly benign HTML markups in the webpage (e.g. through a post or comment) and leverages the gadgets (pieces of js code) living in the existing javascript code to transform it into executable code. We have identified a DOM Clobbering vulnerability in Vite bundled scripts, particularly when the scripts dynamically import other scripts from the assets folder and the developer sets the build output format to `cjs`, `iife`, or `umd`. In such cases, Vite replaces relative paths starting with `__VITE_ASSET__` using the URL retrieved from `document.currentScript`. However, this implementation is vulnerable to a DOM Clobbering attack. The `document.currentScript` lookup can be shadowed by an attacker via the browser's named DOM tree element access mechanism. This manipulation allows an attacker to replace the intended script element with a malicious HTML element. When this happens, the src attribute of the attacker-controlled element is used as the URL for importing scripts, potentially leading to the dynamic loading of scripts from an attacker-controlled server. This vulnerability can result in cross-site scripting (XSS) attacks on websites that include Vite-bundled files (configured with an output format of `cjs`, `iife`, or `umd`) and allow users to inject certain scriptless HTML tags without properly sanitizing the name or id attributes. This issue has been patched in versions 5.4.6, 5.3.6, 5.2.14, 4.5.5, and 3.2.11. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.
This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1. |
| All versions of the package jsonpath-plus are vulnerable to Remote Code Execution (RCE) due to improper input sanitization. An attacker can execute aribitrary code on the system by exploiting the unsafe default usage of vm in Node.
**Note:**
There were several attempts to fix it in versions [10.0.0-10.1.0](https://github.com/JSONPath-Plus/JSONPath/compare/v9.0.0...v10.1.0) but it could still be exploited using [different payloads](https://github.com/JSONPath-Plus/JSONPath/issues/226). |
| GraphQL Java (aka graphql-java) before 21.5 does not properly consider ExecutableNormalizedFields (ENFs) as part of preventing denial of service via introspection queries. 20.9 and 19.11 are also fixed versions. |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. |
| path-to-regexp turns path strings into a regular expressions. In certain cases, path-to-regexp will output a regular expression that can be exploited to cause poor performance. Because JavaScript is single threaded and regex matching runs on the main thread, poor performance will block the event loop and lead to a DoS. The bad regular expression is generated any time you have two parameters within a single segment, separated by something that is not a period (.). For users of 0.1, upgrade to 0.1.10. All other users should upgrade to 8.0.0. |
| A command injection vulnerability was discovered in the TrustyAI Explainability toolkit. Arbitrary commands placed in certain fields of a LMEValJob custom resource (CR) may be executed in the LMEvalJob pod's terminal. This issue can be exploited via a maliciously crafted LMEvalJob by a user with permissions to deploy a CR. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| An out-of-bounds read vulnerability was found in DPDK's Vhost library checksum offload feature. This issue enables an untrusted or compromised guest to crash the hypervisor's vSwitch by forging Virtio descriptors to cause out-of-bounds reads. This flaw allows an attacker with a malicious VM using a virtio driver to cause the vhost-user side to crash by sending a packet with a Tx checksum offload request and an invalid csum_start offset. |
