Export limit exceeded: 396808 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89921 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Zero initialize data structures for inject_pfault_token __kvm_inject_pfault_token() only sets .type and .u.ext.ext_params2 of the on-stack struct kvm_s390_irq but the full ext substructure is copied into the cpu local variable on inject. ext_params and pad contain stale stack values. Interrupt delivery only uses ext_params2, so nothing leaks to the guest, but a host user can use the migration ioctls to get to the data. Fix by zero-initializing the irq struct. Do the same for the inti data structure. | ||||
| CVE-2026-89909 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Free init resources if kvm_init() fails kvm_loongarch_init() calls kvm_loongarch_env_init() to allocate the per-CPU kvm_context (vmcs) and kvm_loongarch_ops and to register the perf callbacks, and then calls kvm_init(). If kvm_init() fails its result is returned directly, but since module_init() does not run the module_exit() stuff on failure, so kvm_loongarch_env_exit() is never called and those resources are leaked. So call kvm_loongarch_env_exit() when kvm_init() fails, matching the teardown-on-failure pattern used by riscv_kvm_init(). | ||||
| CVE-2026-89865 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents. | ||||
| CVE-2026-89858 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() qla2x00_update_fru_versions() copies the user-supplied BSG request into a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates list->count times over the qla_image_version array embedded in that buffer, advancing the image pointer each iteration. count is taken directly from user input with no upper bound, while only (DMA_POOL_SIZE - sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries actually fit. A larger count walks the image pointer off the end of the stack buffer, reading adjacent kernel stack memory and sending it to the device via qla2x00_write_sfp(). Reject requests whose declared count does not fit in the buffer. | ||||
| CVE-2026-89851 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer, so a successful parse would dereference NULL and oops. Worse, the int return value (0 on success, negative errno on failure) was assigned to the unsigned long enable flag, inverting the intended logic: a valid number was treated as "disable" while a parse failure enabled FCE. Parse the value into enable and propagate parse errors to userspace. | ||||
| CVE-2026-89831 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: protect critical_task_priority updates with s_umount The sysfs store path already takes s_umount for GC thread control entries, and ckpt_thread_ioprio is covered as well. critical_task_priority also updates checkpoint or GC kthread scheduling state, but it is not covered by that serialization. It can race with remount or teardown paths that are stopping those threads. Protect critical_task_priority sysfs writes with s_umount too. | ||||
| CVE-2026-89824 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel-edp: fix i2c adapter leak on probe failure Make sure to drop the i2c adapter reference on probe failure (e.g. probe deferral) and on driver unbind also if a devicetree redundantly uses the 'ddc-i2c-bus' property to point to the aux ddc bus. | ||||
| CVE-2026-89816 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_crtc_commit leak if signaled when PAGE_FLIP_EVENT is used Commit 1c6ceeee6ebb ("drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits") fixed a very similar issue when the event was allocated by drm_atomic_helper_setup_commit() itself. However, if the event is allocated in prepare_signaling(), it will also be set to NULL in complete_signaling(), which prevents drm_crtc_commit from being put in __drm_atomic_helper_crtc_destroy_state(). Dropping the reference when the event is set to NULL at complete_signaling() fixes the leak. The leak can be reproduced by sending a signal to the thread using DRM_MODE_PAGE_FLIP_EVENT and using a sw_sync fence to cause the atomic ioctl to block at drm_atomic_helper_wait_for_fences(). It happened both with amdgpu and vkms. | ||||
| CVE-2026-89539 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: reject duplicate CREDS_VALUE options gssx_dec_option_array() walks the wire-supplied option array and, for every entry whose name matches CREDS_VALUE, calls gssx_dec_linux_creds() on the same struct svc_cred. That helper unconditionally installs a fresh groups_alloc() result into creds->cr_group_info without releasing whatever pointer was already there: for (i = 0; i < count; i++) { ... decode name ... if (length == sizeof(CREDS_VALUE) && memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) { err = gssx_dec_linux_creds(xdr, creds); ... } } A reply that carries two CREDS_VALUE entries therefore overwrites cr_group_info on the second iteration and orphans the group_info allocated by the first call. The earlier free_creds path only releases the last cr_group_info via free_svc_cred(), so the first allocation's refcount stays at one and its kvmalloc-backed storage is leaked. No in-tree caller of gssp_accept_sec_context_upcall() expects more than one CREDS_VALUE per reply. Fix by tracking whether a CREDS_VALUE option has already been decoded and returning -EINVAL on any subsequent match, so the free_creds path releases the single group_info that was installed. | ||||
| CVE-2026-89562 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: fix hardware header length for NBMA tunnels ip6gre_tnl_link_config_route() accumulates the lower device's hardware header length into dev->hard_header_len whenever header_ops is set. This is incorrect for both users of header_ops. ip6gretap and ip6erspan have a fixed Ethernet hardware header length. For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header, the optional FOU or GUE header, and the outer IPv6 header. The lower device header is headroom needed later, not part of the tunnel device's hardware header. Keep the lower device header in needed_headroom. Set hard_header_len to the tunnel header length only for ARPHRD_IP6GRE devices with header_ops, and leave the fixed Ethernet header length unchanged for tap and erspan devices. | ||||
| CVE-2026-89739 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.ep_list) | dwc3_debugfs_remove_endpoint_dir(dep) | kfree(dep) | // dep is freed | | dwc3_nostream_work | // use dep (use-after-free) Fix it by canceling the delayed work before kfree(dep) in dwc3_gadget_free_endpoints. | ||||
| CVE-2026-52924 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-09-15 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||
| CVE-2026-89448 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requesting ACS in detect_intel_iommu() don't include tboot, leading to a possible misconfiguration with ACS disabled (e.g. due to user opts) while iommu is later forced on by tboot_force_iommu(). Fix it by checking tboot in detect_intel_iommu(). | ||||
| CVE-2026-43502 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path. | ||||
| CVE-2021-36081 | 2 Linux, Tesseract-ocr | 2 Linux Kernel, Tesseract Ocr | 2026-09-14 | 7.8 High |
| Tesseract OCR 5.0.0-alpha-20201231 has a one_ell_conflict use-after-free during a strpbrk call. | ||||
| CVE-2026-81005 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path, ipmi_add_smi() logs "Unable to get the device id" and goes to out_err_started, where it invokes the lower driver's shutdown callback. try_smi_init() then logs the returned registration failure: ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5 ipmi_si IPI0001:00: Unable to register device: error -5 For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up the SI state machine data, frees smi_info->si_sm, and sets smi_info->si_sm and smi_info->intf to NULL. However, intf->in_shutdown is not set on this failed-registration rollback path. Therefore, the asynchronous redo_bmc_reg work item can still retry BMC device-id probing after the lower driver has already cleared its SI state machine data. In the observed case, that retry path reached start_next_msg(), which passed the NULL smi_info->si_sm pointer to the selected KCS state machine handler: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Workqueue: events redo_bmc_reg [ipmi_msghandler] RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si] Call Trace: start_next_msg+0x50/0x80 [ipmi_si] check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si] sender+0x69/0x80 [ipmi_si] i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler] __get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler] __bmc_get_device_id+0xef/0x950 [ipmi_msghandler] redo_bmc_reg+0x52/0x60 [ipmi_msghandler] process_one_work+0x1a7/0x360 Set intf->in_shutdown on the out_err_started path before invoking the lower driver's shutdown callback. This prevents later redo_bmc_reg retries from using an interface whose lower driver state has been cleaned up, and applies the same shutdown state to other IPMI interfaces as well. | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-64336 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. | ||||
| CVE-2026-89765 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: timers/itimer: Zero-init old itimerval before copy to userspace On native sparc64, struct __kernel_old_timeval contains a four-byte hole after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit. put_itimerval() fills only the named fields in a stack-allocated __kernel_old_itimerval and copies the entire object to userspace, so getitimer() can expose the two padding holes. Zero-initialize the aggregate before assigning the fields so implicit padding is deterministic before it crosses the user/kernel boundary. | ||||