| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate inline dentry name lengths before conversion
Inline dentry conversion copies names out of the inline dentry area
before checking that each recorded name length fits in the available
filename slots.
A corrupted image can therefore make the conversion path read past
the inline filename storage while building the regular dentry block.
Validate each inline dentry name length against the inline filename
area before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-fs: avoid double-free on failed queue setup
virtio_fs_setup_vqs() allocates fs->vqs and fs->mq_map before calling
virtio_find_vqs(). If virtio_find_vqs() fails, the error path frees both
pointers and returns an error to virtio_fs_probe().
virtio_fs_probe() then drops the last kobject reference, and
virtio_fs_ktype_release() frees fs->vqs and fs->mq_map again. This leaves
dangling pointers in struct virtio_fs and can trigger a double-free during
probe failure cleanup.
Set fs->vqs and fs->mq_map to NULL immediately after kfree() in the
virtio_fs_setup_vqs() error path so that the later kobject release sees an
uninitialized state and kfree(NULL) becomes harmless.
This can be reproduced when a broken virtio-fs device advertises more
request queues than the transport actually provides. In that case
virtio_find_vqs() fails while setting up the extra queue, and the probe
path reaches the double-free cleanup sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources()
Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent
buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate handler object type in two places
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op)
Add overflow check for Index + Length to prevent integer overflow
when calculating the truncation length. This prevents negative
size parameter being passed to memcpy(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in acpi_ps_get_next_field()
Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix use-after-free in acpi_ds_terminate_control_method()
Fix use-after-free issue in acpi_ds_terminate_control_method() by
clearing references to method locals and arguments. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: acrn: Fix irqfd use-after-free during eventfd shutdown
acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free
the same struct hsm_irqfd:
CPU0 CPU1
---- ----
eventfd_release()
wake_up_poll(EPOLLHUP)
hsm_irqfd_wakeup()
queue_work(&irqfd->shutdown)
acrn_irqfd_deassign()
hsm_irqfd_shutdown()
list_del_init()
eventfd_ctx_remove_wait_queue()
eventfd_ctx_put()
kfree(irqfd)
hsm_irqfd_shutdown_work()
container_of(work, ..., shutdown)
irqfd->vm <-- use-after-free
The deassign path freed the irqfd while a shutdown work item was
already queued by EPOLLHUP (or vice versa), so the work item could
resurrect a dangling pointer through container_of().
Switch to the lifetime model used by KVM irqfds:
- Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds
under irqfds_lock and queue the cleanup work.
- hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the
eventfd waitqueue entry, drops the eventfd reference and frees the
irqfd.
- A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit()
ensures the cleanup work is queued at most once, no matter how many
of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to
call from the waitqueue callback, which runs with wqh->lock held and
IRQs disabled and therefore cannot take irqfds_lock.
- acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the
eventfd is fully detached on return. acrn_irqfd_deinit() deactivates
every irqfd, flushes the workqueue and only then destroys it, so no
path can queue_work() onto a torn-down workqueue.
- acrn_irqfd_assign() now installs the eventfd waitqueue entry and
publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is
never visible to deassign/deinit before its waitqueue entry is in
place, and any EPOLLHUP that fires in the assign window queues
cleanup work that blocks on irqfds_lock until publication is done. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Fix integer underflow in process_read and process_write
usr_len is read from a network-supplied message field (le16_to_cpu)
and used to compute data_len = off - usr_len without validating that
usr_len <= off. A malicious RDMA client can send usr_len > off causing
an integer underflow, resulting in data_len wrapping to a huge size_t
value which is then passed to the rdma_ev callback as a memory length,
leading to out-of-bounds memory access.
Fix by reading and validating usr_len <= off before rtrs_srv_get_ops_ids()
in both process_read() and process_write(), ensuring the early return
path acquires no reference and has no resource leak. |
| A flaw was found in the Fine-Grained Admin Permissions (FGAP v2) feature of Keycloak, an identity and access management solution. The issue occurs when the system checks if a delegated administrator has permission to assign a specific role to a user. Because the check does not look inside composite roles to see what other permissions they contain, an administrator with limited rights can assign a role that secretly includes full administrative control. This allows the attacker to gain complete management access over the entire realm. |
| Docmost is open-source collaborative wiki and documentation software. Prior to 0.90.1, an authenticated workspace ADMIN can use the workspace invitation flow to invite an external email address with the OWNER role because the role ceiling does not prevent ADMIN users from granting privileges above their own. When the invitation is accepted, the new account receives OWNER-level permissions, allowing the ADMIN to create a backdoor OWNER account or promote a colluding external user to the workspace's highest privilege level. This issue is fixed in version 0.90.1. |
| MinIO through 7aac2a2 does not verify that every x-amz-* header present on a request also appears in the client-supplied X-Amz-SignedHeaders list. extractSignedHeaders() in cmd/signature-v4-utils.go iterates only the claimed list and never enumerates the headers that actually arrived, and thus a header that arrives unsigned is neither hashed into the canonical request nor rejected. Because cmd/api-router.go dispatches CopyObject on the presence of x-amz-copy-source alone, the holder of a presigned PUT URL scoped to a single object can add that header to the unmodified URL and cause a server-side copy, executed as the signer, of any object the signing key can read. A grant to write one object becomes a read of every bucket that key can reach. Amazon S3 rejects the equivalent request with HTTP 403 AccessDenied. The minio/minio GitHub repository was archived in April 2026; pgsty/silo before 1233254 is also affected. |
| The Bookly plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 28.2 via the 'bookly_get_form_id', 'bookly_render_complete', 'bookly_add_to_calendar' and 'bookly_rollback_order' AJAX actions. This is due to the 'bookly_get_form_id' handler blindly storing the attacker-controlled 'order_id' from the submitted form_data into a new booking session, which the 'bookly_render_complete' handler then trusts to look up and return the corresponding Order's secret token without verifying that the current session created that order. This makes it possible for unauthenticated attackers to enumerate sequential order IDs, disclose other customers' order tokens, retrieve calendar/appointment information via 'bookly_add_to_calendar' and permanently delete arbitrary non-completed bookings via 'bookly_rollback_order', which cascade-deletes the customer_appointment and (when no other customers are attached) the underlying appointment. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Release m2m_ctx after Instance Removed from List
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs. |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. |
| In Netgate pfSense Plus before 26.07 and pfSense CE before 2.9.0, a Local File Inclusion (LFI) vulnerability in the Dashboard (index.php) widget sequence data handling allows an authenticated attacker to execute arbitrary PHP code. To exploit this, an attacker with privileges to modify Dashboard settings and write arbitrary files to the pfSense firewall system (e.g., /tmp/test.widget.php) can submit a crafted widget sequence value containing a path traversal payload (e.g., ../../../../../../../../../../../tmp/test). The Dashboard will subsequently read and execute the arbitrary PHP file as if it were a standard widget. |
| ServiceNow has remediated an authorization bypass security issue that was identified in the ServiceNow AI Platform. This security issue, if exploited, could enable an unauthenticated user to access data within the ServiceNow AI Platform that the user otherwise would not be entitled to access, potentially enabling further unintended access.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances. We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash. |
