| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Windows Microsoft DirectMusic allows an unauthorized attacker to execute code over a network. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Heap-based Buffer Overflow vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Heap-based Buffer Overflow vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Code execution. |
| vm2 through 3.11.6 contains a builtin-module denylist bypass in NodeVM. When the embedder uses the builtin wildcard together with negative entries (e.g. require: { builtin: ['*', '-fs', '-child_process'] }), negative entries are matched by exact module name in lib/builtin.js, so -fs removes only the builtin named fs and does not remove builtin subpaths such as fs/promises. Sandboxed code can therefore call require('fs/promises') or require('node:fs/promises') and reach the promise-based filesystem API despite fs being denied; node: prefix handling is likewise inconsistent (a -node:fs/promises entry does not block require('fs/promises')). Host file creation and writing were confirmed via fsp.writeFile(), and other fs/promises operations (cp, mkdir, rename, rm, rmdir, truncate, read operations, etc.) are also reachable. This issue is fixed in vm2 3.11.7. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_v3_module module. When using HTTP/3 with OpenSSL versions <= OpenSSL 3.5.0 under certain configurations, a limited heap buffer overflow could happen while processing a TLS handshake. This can happen in a non-deterministic manner that is beyond the attacker's control. This may cause a heap buffer overflow in the NGINX worker process leading to a restart and/or limited data corruption.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or limited data corruption. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability was determined in GPAC 26.07.0. This affects the function rmt_client_handle_ws_frame of the file src/utils/rmt_ws.c of the component WebSocket Handler. Executing a manipulation of the argument payload_size can lead to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version abi-16.26 is able to mitigate this issue. This patch is called 37bccbb30cf53a0e1a084cea9a1ce422b3ddfe12. Upgrading the affected component is recommended. |
| Freeciv versions before 3.2.6 contain a heap buffer overflow in worklist_load() when processing savegame files with declared worklist lengths exceeding the fixed array bound of 64 elements. Attackers can craft malicious savegame files that write past the entries array into adjacent heap-allocated struct fields, potentially corrupting memory when a user or server operator loads the file. |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to improper validation of message distribution list structures. |
| virtio-win provides Windows paravirtualized drivers for QEMU and KVM. From mm210 until mm320, the Viosock driver permits a low-privilege local process to submit an IOCTL_SELECT request with attacker-controlled VIRTIO_VSOCK_SELECT.Fdss[*].fd_count values that overflow the 32-bit sum used by VIOSockSelect for bounds checking. The wrapped sum can pass the FD_SETSIZE check even though an individual descriptor count is much larger than the expected limit. VIOSockSelectCopyFds then iterates using the unchecked count and writes beyond the allocated pPkt->Fds array in the NonPagedPool kernel heap. Successful exploitation can corrupt kernel memory and enable privilege escalation in a Windows guest running the driver. This issue is fixed in mm320. |
| Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.1848. |
| Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.1376. |
| SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. In 0.9.10 and earlier, the TGA_INDEXED_RLE path selected by image_type == 9 allocates an image buffer using the one-byte-per-pixel SAIL_PIXEL_FORMAT_BPP8_INDEXED format returned by tga_private_sail_pixel_format() in src/sail-codecs/tga/helpers.c, while sail_codec_load_frame_v8_tga() in src/sail-codecs/tga/tga.c derives a two-to-four-byte pixel_size from an attacker-controlled header bpp value from 9 through 32. Loading a crafted color-mapped run-length-encoded TGA through sail_load_from_file() or sail_load_from_memory() therefore writes attacker-controlled bytes beyond the heap pixel buffer. The pixel-count clamp added for CVE-2026-40494 does not constrain the per-pixel write width, so this issue is an incomplete fix of that vulnerability and can cause heap corruption, a reliable crash, or potential code execution. This issue is fixed in version 1.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: reject geometry changes while the VBI queue is busy
vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide
dev->width / dev->norm but only refuse the change when the *video* queue
(dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry:
cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm,
the VBI videobuf2 plane is sized from dev->width / dev->norm in
vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then
recomputes the destination offset from the *live* dev->width and the
latched lines_per_field on every URB completion:
offset = lines_completed * (dev->width << 1) + ...;
if (dma_q->current_field == 2)
offset += dev->width * 2 * dma_q->lines_per_field;
memcpy(plane + offset, p_buffer, lencopy);
Because the VBI node shares video_ioctl_ops with the video node, an
application can size a small VBI plane (REQBUFS/QBUF with a small width,
or with the NTSC standard), then enlarge dev->width (or switch dev->norm
to PAL) through the video node while the VBI stream is running -- the
change is allowed because only dev->vidq is checked -- and let the device
deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the
offset with the larger geometry and memcpy()s past the end of the smaller
plane that was already allocated, a heap out-of-bounds write whose offset
is attacker-chosen and whose contents come from the device. The
per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the
copy against the latched lines_per_field, not the plane's real capacity,
and vb2 does not re-run buf_prepare() for an already prepared buffer.
Refuse the format/standard change when the VBI queue is busy as well, so
the geometry cannot change underneath an allocated VBI buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here. |
| Heap-based buffer overflow in Windows Internet Key Exchange (IKE) Protocol allows an unauthorized attacker to deny service over a network. |
| In NLnet Labs Unbound up to and including 1.26.0, a 255 length query name with a large TCP response can lead to a heap buffer overflow during the RRSet canonicalisation routine. This is caused by missing to add the first owner name into the buffer length check. A malicious actor operating a malicious name server or tampering with an incoming response to Unbound (canonicalisation happens before DNSSEC validation), can trigger the vulnerability. |
| In NLnet Labs Unbound up to and including 1.26.0, a vulnerability was found in the DNSSEC validator that enables denial of service and possible remote code execution as a result of digesting DNSKEYs. A DNSKEY with an owner compression pointer to its own RDATA can overflow the digest buffer. Remote code execution is possible through attacker controlled data. An adversary can exploit the vulnerability by controlling a malicious zone and querying a vulnerable Unbound. |
| In NLnet Labs Unbound up to and including 1.26.0, a vulnerability was found in that can progressively corrupt heap memory and under certain systems and compilation options could lead to remote code execution. The vulnerability starts when CNAME synthesis during an upstream response needs to enforce(rewrite) a max TTL value in the packet buffer. Coupled with a compression pointer that points to the overwritten value and invalidates the domain name, it leads to an error path that does not properly move the buffer position and allows for the heap buffer overflow. Since this is heavily reliant on heap memory layout, results are memory corruption that eventually leads to a crash and under specific systems and compilation options remote code execution. |
| MikroTik RouterOS before 7.24 contains a heap memory corruption vulnerability in the userspace SMB daemon that allows remote attackers to corrupt adjacent heap memory by supplying a crafted uniPwdLen value in the SMB1 SessionSetupAndX handler. An attacker can send a malformed SMB1 request with a uniPwdLen field that triggers an integer underflow, causing the resulting value to be used as the copy length in a memory copy operation into a smaller heap buffer, corrupting adjacent heap memory. |
| Heap-based buffer overflow in Windows Network Connection Broker allows an authorized attacker to elevate privileges locally. |