| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw in libcurl makes it wrongly reuse an existing HTTPS connection setup
for a given hostname even when using a different Native CA Store setting
(`CURLSSLOPT_NATIVE_CA`) than when the connection was created. |
| When `CURLOPT_PINNEDPUBLICKEY` is configured alongside options that disable
standard peer verification (`CURLOPT_SSL_VERIFYPEER = 0` and
`CURLOPT_SSL_VERIFYHOST = 0`), libcurl fails to enforce public key pinning on
connections established without a presented server certificate. Bypassing the
pinning check under these disabled-verification conditions allows
unauthenticated connections to succeed when they should be rejected. |
| When a libcurl-based application performs transfers via `SCP://` or `SFTP://`
and utilizes the `CURLOPT_SSH_KEYFUNCTION` callback, it may silently accept an
untrusted server. This vulnerability occurs when a server presents a host key
type that does not match the specific key type already recorded for that host
in the `known_hosts` file. Instead of rejecting the mismatch, the callback
mechanism fails to properly enforce the restriction, allowing the connection
to succeed without warning and risking a potential man-in-the-middle attack. |
| In this scenario, libcurl first uses a proper HTTP/3 server for the initial
transfers, and when it makes a second transfer to the same site it has been
replaced by the attacker's impostor machine - without a valid certificate.
When libcurl returns to the hostname the second time with a cached SSL session
(`CURLOPT_SSL_SESSIONID_CACHE` is not disabled) and early data enabled (the
`CURLSSLOPT_EARLYDATA` bit is set in `CURLOPT_SSL_OPTIONS`), libcurl might
send off the second request's bytes on that new connection *before* enforcing
the certificate verification failure. Potentially leaking sensitive
information. |
| When a user invokes curl using a schemeless URL combined with
`--proto-default` sftp (or scp), a disconnect occurs between the tool layer
and libcurl. The tool layer incorrectly infers the URL scheme, which
erroneously bypasses the initialization of critical SSH security options like
CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the
libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes
the connection via SFTP/SCP as specified. Because the tool layer skipped the
security configuration, these SSH host verification options are silently
omitted, causing curl to connect to an unverified SSH remote host without
throwing an error. |
| Successfully using libcurl to do a transfer to a specific HTTP origin
(`hostA`) with **Digest** authentication and then changing the origin to a
different one (`hostB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Authorization:` header field meant for `hostA`,
to `hostB`. |
| When doing TLS related transfers with reused easy or multi handles and
altering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentally
reuse a CA store cached in memory for which the partial chain option was
reversed. Contrary to the user's wishes and expectations. This could make
libcurl find and accept a trust chain that it otherwise would not. |
| When using `CURLOPT_PINNEDPUBLICKEY` option with libcurl or `--pinnedpubkey`
with the curl tool, curl should check the public key of the server certificate
to verify the peer.
This check was skipped in a certain condition that would then make curl allow
the connection without performing the proper check, thus not noticing a
possible impostor. To skip this check, the connection had to be done with QUIC
with ngtcp2 built to use GnuTLS and the user had to explicitly disable the
standard certificate verification. |
| Authentication bypass by spoofing vulnerability in Apache Syncope.
When the configured JWKS settings for internal JWT authentication are disclosed (at least protocol and key), an attacker can spoof another user's privileges after completing a successful authentication and obtaining a valid JWT.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2.
Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue. |
| An improper validation vulnerability exists within PingAM where a well-crafted request allows arbitrary or protected ID Token claims to be set or overridden. In certain configurations this could allow an attacker to bypass authentication controls via spoofing leading to privilege escalation or impersonation. |
| Traefik is an HTTP reverse proxy and load balancer. In Traefik v1.x, v2.x through v2.11.55, and v3.0.0 through v3.7.11, header names are canonicalized only on dashes, so X-Auth-User, X_Auth_User and X.Auth.User are treated as three distinct headers by Traefik, while backends that derive variable names from header names (CGI, WSGI, PHP, NGINX and others) collapse them into a single variable. A client can therefore smuggle a dot-form alias of a header that Traefik manages past the middleware managing it — for example supplying X.Authenticated.User alongside the canonical X-Authenticated-User written by the ForwardAuth middleware — causing such a backend to read the client-supplied value instead of the identity Traefik asserted. In the tested configuration (PHP 8.2 built-in SAPI over an HTTP/1 backend path), Go's lexical header ordering makes the attacker-supplied value win deterministically, so a client that ForwardAuth admits as a low-privilege identity can be treated by the backend as a different user or role. Any header Traefik sets is affected, not only ForwardAuth's. This is an incomplete fix for GHSA-x677-9fxg-v5c5, which blocked only the underscore form. Fixed in v2.11.56 and v3.7.12, which add the aliasHeadersStrategy entry-point option; because it defaults to 'keep' for backwards compatibility, it must be explicitly set to 'delete' or 'reject' for the fix to take effect. Unmaintained release lines will not receive a patch. |
| matrix-sdk-crypto is a no-network-IO implementation of a state machine that handles end-to-end encryption for Matrix clients. Starting in version 0.12.0 and prior to version 0.17.0, the matrix-sdk-crypto crate was missing a check for the user ID when decrypting an Olm-encrypted event containing the `sender_device_keys` property. This could be exploited to forge an encrypted to-device event, but only if the attacker colludes with the homeserver operator. This issue is fixed in matrix-sdk-crypto 0.17.0. There are no known workarounds for the issue. |
| A weakness has been identified in andreashappe cochise up to 0.4.1. Affected is the function asyncssh.connect of the file src/cochise/ssh_connection.py of the component SSH Host Key Handler. Executing a manipulation can lead to improper certificate validation. The attack may be launched remotely. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw was found in the OCAPI modules (ocapi_command, ocapi_info) of the
community.general Ansible collection. The shared OCAPI request helper disables
TLS certificate validation on every request and the modules expose no parameter
to re-enable it, while sending HTTP Basic-Auth credentials to an https endpoint.
An attacker positioned on the network path between the Ansible controller and the
OCAPI-managed storage/enclosure device can present any certificate, intercept the
session, capture the credentials, and tamper with responses. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Improper certificate validation in Loader in Google Chrome prior to 153.0.8010.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via crafted network traffic. (Chromium security severity: Low) |
| Improper certificate validation in CORS in Google Chrome prior to 153.0.8010.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via crafted network traffic. (Chromium security severity: Low) |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Maravel, a PHP framework oriented towards dependency injection, prior to version 10.74.0 has a high-severity Token Replay Vulnerability arising from a structural lifecycle mismatch between stateless token validation engines and high-performance relational caching layers. Any application with low cache memory that causes premature eviction to free up memory and applications running macropay-solutions/maravel-framework that utilize tymon/jwt-auth for API token authentication and blacklist management or any other package that does the same may be affected. This architectural risk might also impact native Laravel applications utilizing cache tags under specific volatile or eviction-capped environments. tymon/jwt-auth automatically probes for cache tag support. If found, it forcefully wraps 14-day token blacklist entries (jti) inside a relational tymon.jwt tag. In environments where the O(1) Atomic Lazy Eviction model is active — either natively inside Maravel-Framework v20.x or manually backported into v10.x via the explicit DI container singletons provided in PR #104 (App\Cache\TaggedCache and App\Cache\TagSet) — a strict global tracking ceiling (Container::TAGGED_CACHE_TTL_CAP_SECONDS) of 7,200 seconds (2 hours) is enforced to secure the system against memory index bloat. This ceiling forcefully truncates the 14-day blacklist lifespan down to a maximum of 2 hours, after which individual tracking keys naturally expire and disappear from the active cache window. Furthermore, because the optimized engine implements a generational version matrix to achieve O(1) flush speeds, any programmatic or manual invocation of a tag flush or reset (e.g., Cache::tags([...])->flush()) instantly bumps the internal atomic master version pointer. This shifts the computed cryptographic composite hash (sha1($this->tags->getNamespace())) for all overlapping components, rendering the entire existing index immediately unreachable. Consequently, through either natural 2-hour expiration or an intervening tag flush execution (like the cache naturally cleaning old values to free up memory), the invalidation state records are entirely wiped out. Because the tokens' physical cryptographic signatures remain structurally valid for up to 14 days, stolen, hijacked, or legitimately logged-out tokens are instantly and silently resurrected across the entire API gateway, leaving the application critically vulnerable to widespread Token Replay Attacks. Because this issue is caused by an upstream architectural assumption within the tymon/jwt-auth package rather than a core defect inside the framework, there is no direct framework version upgrade that can safely bypass this lifecycle collision without breaking business cache recycling bounds. Maravel version 10.74.0 introduced a way to backport the new fixed tagged cache from 20.x into 10.x by resolving TagSet and TaggedCache from DI, which is how this latent architectural lifecycle vulnerability was discovered. Users must apply the decoupled configuration workaround outlined below. As a workaround, make sure that cache memory size does not generate early natural evictions from cache to free up space, deleting blacklisted jwt ids before they expire. Applications must decouple flat authentication vectors from the relational tagging subsystem. This forces token identifiers to write directly to the primary cache keyspace as flat, un-tagged key-value pairs where they securely retain their unclipped 14-day lifecycle. |
| An issue was discovered in the mirage-crypto-ec function before 2.2.0 for OCaml. The ECDSA functions {P256,P384,P521}.Dsa.pub_of_octets accept 0x00, the encoding of the point at infinity, as a public key. With that public key, signatures can be forged without a private key. |
