| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmt/src/settings_mgmt.c allocate a key_name buffer (and, for read, a data buffer) via k_malloc() when CONFIG_MCUMGR_GRP_SETTINGS_BUFFER_TYPE_HEAP is enabled, relying on the end: label to k_free() them. When CONFIG_MCUMGR_GRP_SETTINGS_ACCESS_HOOK is also enabled and the application access hook rejects a request by returning status MGMT_CB_ERROR_RC, the handler executed return ret_rc; directly, bypassing end: and leaking the heap allocation on every rejected request.
The settings handlers are reachable over the unauthenticated SMP transport (Bluetooth LE, UART, or UDP, depending on product configuration). The access hook is the mechanism applications use to deny unauthorized settings access, and MGMT_CB_ERROR_RC is a common rejection style, so an attacker who can send settings read/write/delete commands that the hook rejects triggers a heap leak on each attempt.
Because the leaked memory is never reclaimed until reboot, a sustained stream of rejected requests monotonically exhausts the kernel heap until k_malloc() fails, denying mcumgr service and impacting any other heap consumer on the device — a denial of service. The impact is availability-only; there is no memory corruption or information disclosure. Only configurations that select the heap buffer type, enable the access hook, and register a hook that returns MGMT_CB_ERROR_RC are affected (the default stack buffer type cannot leak). |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: Fix memory leak in unittest_data_add()
In unittest_data_add(), if of_resolve_phandles() fails, the allocated
unittest_data is not freed, leading to a memory leak.
Fix this by using scope-based cleanup helper __free(kfree) for automatic
resource cleanup. This ensures unittest_data is automatically freed when
it goes out of scope in error paths.
For the success path, use retain_and_null_ptr() to transfer ownership
of the memory to the device tree and prevent double freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG")
made the __qlt_24xx_handle_abts() function return early if
tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean
up the allocated memory for the management command. |
| compression is a Node.js and Express compression middleware. In versions before 1.8.2, when a client aborts the connection while a compressed response is still being sent, the zlib stream created to compress that response is never destroyed, so each aborted compressed response leaks its native zlib memory. A remote unauthenticated attacker can repeatedly open requests and disconnect early, exhausting the available memory and crashing the server. All applications using compression are affected. The issue is fixed in compression 1.8.2, and users should upgrade to 1.8.2 or later. |
| strongSwan 5.0.2 through 6.0.7 allows PKCS#7 certificate enumeration in the openssl plugin that leads to a lack of release of memory after its effective lifetime. |
| libcharon in strongSwan 4.1.2 through 6.0.7 has a missing release of memory after its effective lifetime in the IKE message parser. |
| strongSwan 4.2.0 through 6.0.7 has a missing release of memory after its effective lifetime in the x509 plugin's attribute certificate parser. |
| Missing release of memory after effective lifetime in Windows DHCP Server allows an unauthorized attacker to deny service over a network. |
| Missing release of memory after effective lifetime in Windows DHCP Server allows an authorized attacker to deny service over an adjacent network. |
| Missing release of memory after effective lifetime in Windows DHCP Server allows an authorized attacker to deny service over a network. |
| Missing release of memory after effective lifetime in Active Directory Domain Services allows an unauthorized attacker to deny service over a network. |
| Missing release of memory after effective lifetime in Windows DHCP Client allows an unauthorized attacker to deny service over an adjacent network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a memory leak. |
| A Spring RSocket application is exposed to a memory leak via a malformed SETUP frame.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19
Spring Framework 6.1.0 - 6.1.28
Spring Framework 6.0.0 - 6.0.30
Spring Framework 5.3.0 - 5.3.49
Spring Framework 5.2.0.RELEASE - 5.2.25.RELEASE |
| rpcapd can allocate up to 65536 bytes per each RPCAP_MSG_UPDATEFILTER_REQ or RPCAP_MSG_STARTCAP_REQ message received from the client, but it never frees the memory, so it leaks memory even under normal use. A malicious client can cause the server to leak memory substantially faster. |
| Protocol::HTTP2 versions before 1.14 for Perl allow memory exhaustion via closed streams that stream_state never removes from the connection stream table.
When a stream reaches the CLOSED state, stream_state returns the concurrency slot and clears most of the stream's keys, but the entry itself stays in the connection stream table and nothing in the distribution removes it. Stream identifiers increase monotonically, so a peer can open and close streams on one connection indefinitely, each close leaving a residual entry that is retained for the life of the connection.
SETTINGS_MAX_CONCURRENT_STREAMS does not bound this. That setting caps how many streams are live at once and is enforced, while the growth is made of streams the cap has already released, so it accumulates with concurrency never exceeding one. The client keeps the same table and grows the same way against a hostile server.
Measured against a server built on this module, roughly 920 bytes are retained per closed stream for about 19 bytes on the wire, so 100,000 sequential streams on one connection grow server resident memory by about 88 MiB. The streams are ordinary requests that the application accepts and completes. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate Rock Ridge CE continuation extent against volume size
rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE
record and passes it to sb_bread() without checking that the block
number is within the mounted ISO 9660 volume. commit e595447e177b
("[PATCH] rock.c: handle corrupted directories") added cont_offset
and cont_size rejection for the CE continuation but did not validate
the extent block number itself. commit f54e18f1b831 ("isofs: Fix
infinite looping over CE entries") later capped the CE chain length
at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked.
With a crafted ISO mounted via udisks2 (desktop optical auto-mount)
or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at
an out-of-range block or at blocks belonging to an adjacent
filesystem on the same block device. sb_bread() on an out-of-range
block returns NULL cleanly via the block layer EIO path, so there
is no memory-safety violation. For in-range reads of adjacent-
filesystem data, the CE buffer is parsed as Rock Ridge records and
only the text of SL sub-records reaches userspace through
readlink(), which makes the info-leak channel narrow and difficult
to exploit; still, rejecting the malformed CE outright matches the
rejection shape already present in the same function for
cont_offset and cont_size.
Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next
to the existing offset/size rejection, printing the same
corrupted-directory-entry notice. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables. |
