| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: clean up device list on probe failure
sony_input_configured() adds some controllers to sony_device_list before
HID core registers their input devices. input_register_device() can fail
after the callback returns successfully. sony_probe() then observes that
HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware.
The devres-managed sony_sc is freed while its list node remains linked, so
the next matching controller traverses freed memory.
Initialize the list node and device ID to inactive states. Make list
removal idempotent and run the driver-private cleanup on every probe
failure path. This also makes a second cleanup safe when
sony_input_configured() already unwound a partial initialization before
sony_probe() handles the missing input claim.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against the HID input registration and probe unwind paths. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create()
nfsd4_create() stores the return value of nfsd4_acl_to_attr() in
status, but the switch(create->cr_type) block unconditionally
overwrites it in every branch. ACL translation errors are silently
discarded, and the CREATE proceeds without the requested ACL.
Add an early exit check after nfsd4_acl_to_attr(), matching the
pattern already used in nfsd4_setattr().
[ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix clock domain mismatch in clients_still_reclaiming()
clients_still_reclaiming() computes a deadline from nn->boot_time
(CLOCK_REALTIME, ~1.7 billion) but compares it against
ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot).
The comparison is always false — it would take ~54 years of uptime
for BOOTTIME to exceed the REALTIME-derived deadline.
This means any client can hold the server in grace indefinitely by
sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim
operations for all other clients.
Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time
and use it for the deadline computation. boot_time (CLOCK_REALTIME)
is preserved for its cl_boot clientid-nonce role. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: close shrinker/GC/fsnotify vs per-net shutdown race in filecache
The shrinker, GC worker, and fsnotify/lease callbacks can unhash an
nfsd_file from the rhashtable and then call
nfsd_file_dispose_list_delayed() to move it to the per-net dispose list.
If nfsd_file_cache_shutdown_net() runs concurrently, its rhashtable walk
misses the already-unhashed file, and its drain of the per-net dispose
list can run before the file has been queued. The file then sits on
the per-net list with no thread to drain it, leaking both the file and
its associated state.
The GC worker and shrinker already hold nfsd_gc_lock while walking the
LRU, but in the original code they release it before calling
nfsd_file_dispose_list_delayed(). The fsnotify/lease path
(nfsd_file_close_inode) has no synchronization at all.
Fix this by:
1. Widening nfsd_gc_lock in both nfsd_file_gc() and nfsd_file_lru_scan()
to cover the nfsd_file_dispose_list_delayed() call.
2. Wrapping nfsd_file_close_inode() in nfsd_gc_lock so that all three
callers of nfsd_file_dispose_list_delayed() hold the lock.
3. Adding a spin_lock/unlock(nfsd_gc_lock) barrier in
nfsd_file_cache_shutdown_net() after the purge, so that any
in-progress disposal has fully completed before the per-net list
is drained.
All operations inside the lock are non-sleeping (rhashtable lookups,
atomic bit/refcount ops, list moves, svc_wake_up), so the spinlock is
appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: universal-pidff: stop the device when force-feedback init fails
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in
mcp->rxbuf for the duration of a transfer but never clears it when the
transfer finishes or times out. Once the caller frees or reuses the
buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious
MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to
memcpy device data into the freed memory, causing a write
use-after-free.
Route all return paths through a single exit point that clears
mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard
in the raw_event handler can reject any report arriving after the
transfer has ended. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: skip sufficiently large global buffers when resizing
z_erofs_gbuf_nrpages is advanced only after every global buffer has been
grown. If a resize fails after some buffers were enlarged, a retry
revisits those enlarged buffers.
Retrying the same size then returns -ENOMEM because alloc_pages_bulk()
has no pages to add and the unchanged return value is treated as a
failure. Retrying an intermediate size allocates a temporary pointer
array smaller than gbuf->nrpages and copies more existing pointers than
the array can hold.
Skip buffers that already satisfy the request. Once all remaining
buffers have caught up, advancing z_erofs_gbuf_nrpages again describes
the guaranteed minimum size across the pool. |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()
ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
check when reading idev->cnf.rpl_seg_enabled.
When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
dev->ip6_ptr already NULL.
Reproduced by flooding the receiving interface with ping6 traffic while
flapping its MTU between 1500 and 1200:
BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
Read of size 4 at addr 00000000000006b4 by task ping6/394
CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
Call Trace:
<IRQ>
kasan_report+0xc6/0x100
ipv6_rpl_srh_rcv+0xb3/0x1070
ip6_protocol_deliver_rcu+0x759/0x9a0
ip6_input_finish+0xa8/0x1b0
ip6_input+0xe1/0x490
ipv6_rcv+0x33d/0x460
__netif_receive_skb_one_core+0xd6/0x130
process_backlog+0x2cc/0xa00
__napi_poll.constprop.0+0x56/0x270
net_rx_action+0x327/0x730
handle_softirqs+0x11e/0x630
do_softirq+0xb3/0xf0
</IRQ>
Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
ipv6_rthdr_rcv(), which already has an idev lookup.
Fix the NULL dereference on the RPL path by checking idev in
ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
an argument and no longer call __in6_dev_get(), so the packet is now
dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: defer rq_argp and rq_resp free until after RCU grace period
svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously
via kfree(), but defers the rqstp struct free via kfree_rcu(). After
svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is
a window where RCU readers that started before list_del_rcu() can still
traverse the thread list and find the rqstp. These readers (e.g.
nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has
already been freed — a use-after-free.
Fix this by moving the kfree of rq_argp and rq_resp into an explicit
call_rcu() callback alongside the struct free. Resources not accessed
by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain
synchronously freed. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix gssx_dec_option_array error path bugs
Four coupled defects in the gssx XDR option-array decoder make the
error paths unsafe: a NULL deref in the caller, a refcount leak on
the decoded group_info, and a latent use-after-free that the leak
fix would otherwise expose.
gssx_dec_option_array() sets oa->count = 1 before allocating
oa->data. If that allocation fails, -ENOMEM is returned with
oa->count == 1 and oa->data == NULL. All other error paths jump
to free_oa: which frees oa->data and NULLs it but also leaves
oa->count == 1. The caller trusts the count:
gssp_accept_sec_context_upcall()
gssx_dec_accept_sec_context()
gssx_dec_option_array() /* fails, count=1 data=NULL */
data = res.options.data[0].value /* NULL deref */
Independently, free_creds: releases the partially decoded svc_cred
with a bare kfree(creds). gssx_dec_linux_creds() installs a
groups_alloc() result into creds->cr_group_info; that object is
kvmalloc-backed and refcounted, and only put_group_info() reaches
kvfree(). A plain kfree(creds) drops the wrapper and leaks the
group_info allocation.
The natural fix for the leak is to call free_svc_cred(creds) before
kfree(creds), but free_svc_cred() invokes put_group_info() on
creds->cr_group_info unconditionally when non-NULL. The existing
out_free_groups: path in gssx_dec_linux_creds() already called
groups_free() on that pointer without clearing it, so once
free_svc_cred() is wired in, the subsequent put_group_info() would
touch freed memory.
Fix all four together:
- Move the oa->count = 1 assignment below the oa->data allocation
so it is never set when oa->data is NULL.
- Reset oa->count to 0 at free_oa: so count and data stay
coherent and the caller sees an empty option array.
- Call free_svc_cred(creds) before kfree(creds) at free_creds:
so the refcounted cr_group_info is released. free_svc_cred()
either NULL-guards each field explicitly (cr_group_info has
an if() check) or delegates to a helper that is NULL-safe
itself (kfree for the string fields, gss_mech_put() which
guards with if(gm) at gss_mech_switch.c:342), so it is safe
to call on a partially decoded svc_cred where only
cr_uid/cr_gid/cr_group_info have been written and everything
else is zero from kzalloc.
- In gssx_dec_linux_creds()'s out_free_groups: path, release
cr_group_info with put_group_info() rather than groups_free()
so the teardown matches free_svc_cred()'s refcount-aware path,
and clear the pointer so a later free_svc_cred() on the same
creds does not release it a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id
svc_rdma_free() caches rdma->sc_cm_id->device before teardown,
then calls rdma_destroy_id(sc_cm_id) which frees the cm_id.
rpcrdma_rn_unregister() follows, but between those two calls
the transport's sc_rn entry is still installed in the device's
rd_xa. A concurrent ib_unregister_device walk can dispatch
svc_rdma_xprt_done() against the now-freed sc_cm_id.
Move rpcrdma_rn_unregister() before rdma_destroy_id() so the
transport's notification entry is removed from the xarray before
the cm_id it references is destroyed.
Also guard the sc_cm_id dereference with a NULL check: the
following patches introduce paths that reach svc_rdma_free()
with sc_cm_id == NULL (listener create failure, ADDR_CHANGE
replacement failure). |
