| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, DOMHandler.startElement in lib/dom-parser.js inserts every parsed attribute through setAttributeNode, while NamedNodeMap.setNamedItem in lib/dom.js calls the linear getNamedItem or getNamedItemNS lookup for each insertion. A well-formed element with many distinct attributes therefore requires quadratic comparisons during DOMParser.parseFromString() and can stall a Node.js event loop before application validation. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - restore callback for non-parallel fallback
pcrypt installs pcrypt_aead_done() on the child AEAD request before
trying to submit it through padata. If padata_do_parallel() returns
-EBUSY, pcrypt falls back to calling the child AEAD directly.
That fallback must not keep the padata completion callback. Otherwise
an asynchronous completion runs pcrypt_aead_done() even though the
request was never enrolled in padata.
Restore the original request callback and callback data before calling
the child AEAD directly. This keeps the fallback path aligned with a
direct AEAD request while leaving the parallel path unchanged. |
| A non-global organization admin in one tenant can bypass tenant boundaries to delete, create, or modify resources in any other tenant by exploiting a mismatch between authorization (based on ?id=) and action (based on request body). |
| @fastify/busboy is a multipart form-data parser. In versions 3.1.0 through 3.2.0, a remote unauthenticated attacker can stall the Node.js event loop by sending a multipart request whose boundary is crafted to a specific length. The vendored streaming search stores its skip table in a fixed 256 entry byte array, and a boundary of exactly 252 bytes makes the search needle 256 bytes, which truncates the default skip distance to zero and turns the search into a CPU bound loop on a small body. A single small request can keep one core busy and deny service to other requests handled by the same process. The issue is fixed in @fastify/busboy 3.2.1, which widens the skip table so the skip distance is preserved. Users should upgrade to 3.2.1. |
| Kibana Agent Builder A2A JSON-RPC API endpoint derives the identifier of a stored conversation from a user-supplied input, and the ownership check on that identifier does not distinguish between a conversation that does not exist and one that exists but belongs to another user. As a result, an authenticated user holding only the Agent Builder read privilege can supply an identifier already in use by another user in the same space and cause that user's conversation to be replaced and reassigned to the requesting account. The original owner permanently loses access to the conversation and its history. The impact is limited to loss of integrity and availability of the affected conversation; the attacker does not read the overwritten content. |
| Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/J). Supported versions that are affected are 9.7.0-9.7.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Connectors. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all MySQL Connectors accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N). |
| Flowise versions before 3.1.3 contain an insecure direct object reference vulnerability in the GET /api/v1/organization/customer-default-source endpoint that allows authenticated attackers to access other customers' payment and profile data by manipulating the customerId parameter. Attackers can enumerate predictable customer IDs to retrieve sensitive information including email addresses, account balances, currency types, and billing configurations without authorization checks. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks. |
| EasyAdmin is a fast and modern admin generator for Symfony applications. From 4.0.0 until 4.29.16 and 5.5.1, EasyAdmin serves all backend requests through a single dashboard route and, for custom actions (Action::linkToRoute() and MenuItem::linkToRoute()), swaps the executed controller based on the routeName query parameter on the kernel.controller event. The swap happens after Symfony's security firewall has already evaluated access_control against the original dashboard URL, and the routeName value was not validated. As a result, a path-based access_control rule protecting the target route was never evaluated, so a low-privilege backend user who can reach a single EasyAdmin URL and knows a target route's name can execute that route's controller, bypassing the path-based rule. Only path-based protections are bypassed. Routes whose controller enforces its own authorization with #[IsGranted] or denyAccessUnlessGranted() remain protected because those checks are recomputed against the swapped-in controller. This issue is fixed in versions 4.29.16 and 5.5.1. |
| Net::DNS versions before 1.57 for Perl allow memory exhaustion via unbounded recursion in sig_data when re-encoding a message with a misplaced TSIG record.
sig_data signs a message by re-encoding it, and removes TSIG records only from the additional section. A TSIG decoded into the answer or authority section survives that step and is signed again, so encoding re-enters sig_data with no termination condition. Decoding does not reject such a message: a TSIG that is not the last record on the wire raises "misplaced or corrupt TSIG", but the error is caught, reported as a warning, and the record is left in the packet. RFC 8945 section 5.2 requires the message to be dropped.
The recursion is reached only when the decoded TSIG carries an empty MAC, since a MAC recovered from the wire short-circuits the signing step. It is reached only from code that re-encodes a message it decoded, such as a forwarder or a proxy. A decoded message that is never re-encoded is unaffected. Message direction does not matter: a query reaches the same path as a response.
Each cycle re-encodes the whole message, so fewer than 100 bytes on the wire exhaust available memory and terminate the process. |
| vhr through commit 03abbd3 fails to verify that the account ID in PUT /hr/pass requests belongs to the authenticated caller. Authenticated attackers can change arbitrary account passwords by supplying a target account ID and that account's current password in the request body. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix hard lockup on disconnect
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job. |
| A flaw was found in the first-broker-login flow of the Keycloak identity management service. When a user links a social identity provider account to their local account, the verification proof generated is not strictly bound to the specific upstream identity being verified. This allows an attacker with a different account on the same social provider to intercept the process and link their own account to the victim's local profile, gaining unauthorized access. |
| The MasterStudy LMS WordPress Plugin WordPress plugin before 3.7.46 does not properly verify authorization when retrieving order line-item data, allowing any authenticated user including Subscribers to read other instructors' course sales records by supplying another user's identifier. |
| The MasterStudy LMS WordPress Plugin WordPress plugin before 3.7.46 does not properly verify ownership of quiz question identifiers, allowing users with instructor access to read other instructors' quiz questions, including the correct answers and explanations. |
| The MasterStudy LMS WordPress Plugin WordPress plugin before 3.7.46 does not properly verify ownership of a curriculum object before acting on it, allowing authenticated users with the instructor role to delete or modify curriculum sections and materials belonging to courses owned by other instructors. |
| Jenkins Microsoft Entra ID (previously Azure AD) Plugin 710.v0b_ff8e9cc2d2 and earlier grants Entra group permissions using both the group's unique object ID and its display name, allowing attackers who can create an Entra group with a colliding display name to gain the permissions configured for a privileged group. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing barriers when accessing stream->subrequests locklessly
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock). |
| agentverus-scanner fails to analyze compiled Python bytecode files in companion code directories, allowing attackers to bypass security scanning by shipping malicious __pycache__ entries alongside benign source files. Attackers can execute arbitrary Python bytecode on import while the scanner reports a CERTIFIED verdict with high trust scores in both static and semantic analysis modes. |
