| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in xorg-x11-server. In the X Keyboard Extension (XKB), key name memory is allocated with an insufficient buffer size compared to the maximum supported range. An authenticated local client can exploit this flaw by sending requests that modify the keycode range, triggering a heap-based buffer overflow. This vulnerability can lead to arbitrary code execution or cause a Denial of Service (DoS) by crashing the X server. |
| A flaw was found in xorg-x11-server. The server writes pointer barrier events into a fixed-size buffer without properly validating boundaries. An authenticated client can trigger this issue by configuring excessive pointer barriers and generating cursor motion events, causing a buffer overflow. This vulnerability may lead to arbitrary code execution or cause the server to crash, resulting in a Denial of Service (DoS). |
| A flaw was found in xorg-x11-server. Due to an integer truncation issue during memory allocation calculations within the X Keyboard Extension (XKB), the server allocates an undersized buffer when resizing key types. An authenticated local client can exploit this vulnerability by sending specially crafted XKB requests, causing a heap-based buffer overflow. This can result in arbitrary code execution or a denial of service (DoS). |
| A flaw was found in xorg-x11-server. The GLX (OpenGL Extension to the X Window System) interface fails to verify that incoming data sizes do not exceed allocated buffer limits when handling large rendering requests. An authenticated local client can exploit this vulnerability by sending a specially crafted request, triggering a heap-based buffer overflow. Successful exploitation can result in arbitrary code execution with the privileges of the X server or cause a Denial of Service (DoS) by crashing the application. |
| A flaw was found in xorg-x11-server. A use-after-free vulnerability, where the application accesses memory after it has already been released, occurs in the Present extension because window notification entries are not properly unlinked before cleaning up window resources. An authenticated local X client can exploit this flaw by creating cross-window notifications and subsequently destroying the target window. Successful exploitation primarily results in a Denial of Service (DoS) via an X server crash, and may potentially lead to information disclosure. |
| A flaw was found in the X.Org X Server and XWayland. An error handling issue in the X Keyboard Extension (XKB) geometry processing fails to clear a memory pointer after an allocation failure, leading to a double-free condition during cleanup. A local user can exploit this vulnerability by sending a specially crafted request to the display server. This can cause memory corruption, potentially resulting in a Denial of Service (DoS) or arbitrary code execution with elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't free driver-owned scan requests
When an interface goes down while a scan is running, cfg80211 completes
the scan towards userspace and frees the scan request. However, the
driver can be convinced that it owns the request, since the cancellation
is (intended to be) asynchronous.
The WARN_ON() in the netdev notifier was meant to catch this, but it's
not actually avoidable, so it triggers and we get a UAF in scan_done().
There doesn't seem to be a great way around it, so just track that the
driver is still convinced it owns the request, and then just free it on
completion if it was already cancelled. Also remove the warnings since
they can trigger in the intended architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: downgrade zerocopy managed frags before mutating skb frags
On the out-of-place output path (esp->inplace == false) ESP rewrites the
skb frag array: esp_output_head() appends a trailer frag and
esp_output_tail() replaces the frags with a destination page, both
referenced with get_page().
When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the
payload frags are owned by the ubuf and must not be referenced or
unreferenced individually, but ESP mutates the frag array without ever
downgrading the skb. This breaks the managed-frag invariant two ways:
- esp_ssg_unref() walks the source scatterlist and drops a page
reference for every frag, including the ubuf-owned payload frags,
pushing their refcount below the GUP pin bias while the pages are
still pinned, i.e. a use-after-free of the zerocopy pages;
- esp_output_tail() installs its destination page as frag 0 with
get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so
skb_release_data() takes the skip_unref branch and never drops that
reference, leaking the x->xfrag page at packet rate.
Fix this the way every other frag-mutating site does (__ip_append_data(),
__ip6_append_data(), tcp_sendmsg_locked()) and call
skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes
a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS,
so the per-frag unref in esp_ssg_unref() and the frag release in
skb_release_data() are both balanced and no mixed-ownership frag array is
left behind. |
| The Yaad Sarig Payment Gateway For WC WordPress plugin before 2.2.13 does not verify authorization or that the requesting user owns the target order in several of its order payment-processing actions, allowing any authenticated user, including subscribers, to act on and alter orders belonging to other customers. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in SERVIT Software Solutions affiliate-toolkit affiliate-toolkit-starter allows Blind SQL Injection.This issue affects affiliate-toolkit: from n/a through 3.9.1. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Sarah Giles Dynamic User Directory dynamic-user-directory allows Blind SQL Injection.This issue affects Dynamic User Directory: from n/a through 2.4. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, net.jpountz.lz4.LZ4BlockInputStream refill() validates that the compressedLen field in a legacy LZ4Block header is nonnegative but allocates a compressed-input buffer of that attacker-controlled size before reading payload data, allowing a header-only stream to request a near-2 GiB allocation and exhaust the JVM heap. Canonical writers emit raw blocks when compression is not smaller than the original block, but vulnerable readers accept non-canonical oversized compressed blocks. This issue is fixed in version 1.11.2. |
| Clickjacking in EVP in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Use of released resource in Session in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| Observable discrepancy in Scroll in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted Chrome extension. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
reconnect.
Signal the channel and the primary server and capture the primary
server pointer before dropping the channel reference with
cifs_put_tcp_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
