| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, so those bytes reach the target. SRP_AER_REQ behaves the same way
and also reads req->lun.
The leak is 8 bytes per response. max_ti_iu_len also decides which slab
cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and
the read is entirely outside it:
BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0
Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of
allocated 8-byte region [ffff888104714da0, ffff888104714da8)
Without KASAN the returned bytes are whatever is next in the slab. One
run returned ".strtab".
rsp->data[3] in srp_process_rsp() has the same problem: only
resp_data_len is checked before it is read.
Drop a request that is shorter than the structure being parsed, and
check byte_len before the tsk_mgmt read. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
In the perf enable path, there are missing cases where
cscfg_csdev_disable_active_config() is not called:
- Branch broadcast is selected but not supported by the hardware
- etm4_enable_hw() fails
This can lead to a leak of config_desc->active_cnt.
Fix this by properly calling cscfg_csdev_disable_active_config()
in these error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
media: bcm2835-unicam: Fix asc leaked in error/remove path
v4l2_async_nf_add_fwnode_remote() allocates the asc, which is freed when
v4l2_async_nf_cleanup() is called.
Call v4l2_async_nf_cleanup() properly in the driver paths.
Discovered with kmemleak after rmmod:
unreferenced object 0xffff000084526b80 (size 64):
comm "modprobe", pid 185, jiffies 4295013512
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 e8 0d ff bf 00 00 ff ff ................
40 83 bc 84 00 00 ff ff 60 83 bc 84 00 00 ff ff @.......`.......
backtrace (crc ac584083):
[<00000000ffb081a7>] kmemleak_alloc+0x38/0x44
[<00000000d2fd9301>] __kmalloc+0x1b0/0x250
[<000000004dd5354d>] __v4l2_async_nf_add_fwnode+0x28/0x9c
[<0000000067587657>] __v4l2_async_nf_add_fwnode_remote+0x3c/0x64 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix stack out-of-bounds read in cc_params debugfs
get_param() reads a congestion parameter as a u32 but formats it with the
signed "%d" into an 11-byte stack buffer. A value with bit 31 set, such as
0x80000000, renders as "-2147483648\n" whose full length is 12. snprintf()
stores only 11 bytes yet returns 12, so simple_read_from_buffer() treats 12
bytes as valid and reads one byte past lbuf[].
Size the buffer for the widest unsigned decimal, format with "%u" to match
the u32, and use scnprintf() so the length passed to
simple_read_from_buffer() reflects the bytes actually stored. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, riscv: Fix extable handling for arena load_acquire
emit_atomic_ld_st() returns 1 to have build_body() skip the zext after
a sub-word load_acquire. The caller does "ret = ret ?:
add_exception_handler(...)", which skips add_exception_handler() on any
non-zero ret, so the extable entry is missing and a faulting
PROBE_ATOMIC load_acquire oopses.
REG_DONT_CLEAR_MARKER leaves rd stale on fault, and the verifier still
thinks the load overwrote it, so a program can leak it through a map.
Check ret >= 0 before calling add_exception_handler(), and pass rd for
LOAD_ACQ so the fault zeroes rd like a PROBE_MEM load. Return ret
unchanged for the zext skip. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zero queue and stack outputs on lock failure
Queue and stack pop/peek helpers accept an uninitialized output buffer
because the verifier expects the helper to initialize it. The empty-map
error path clears the buffer, but a failed lock acquisition returns
-EBUSY without writing it.
Clear the output before returning -EBUSY so BPF programs cannot observe
uninitialized stack contents after a failed helper call. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser
iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Copy per-CPU map value padding in copy_map_value_long()
In kernel, per-CPU map elements are stored with
round_up(map->value_size, 8) bytes. On UAPI lookup paths, it copies the
rounded size for each CPU into a temporary buffer.
However, copy_map_value_long() passes 'map->value_size' to
bpf_obj_memcpy(). When the map has special fields, bpf_obj_memcpy() copies
around those fields with memcpy(), and does not copy the tail padding
between 'map->value_size' and round_up(map->value_size, 8).
The temporary UAPI lookup buffers are allocated without __GFP_ZERO. As a
result, when the per-CPU map's value size is not equal to
round_up(map->value_size, 8), UAPI LOOKUP_ELEM and its variants can return
stale heap contents from that padding to user space. The same issue
applies to bpf_iter for per-CPU maps.
Pass round_up(map->value_size, 8) to bpf_obj_memcpy() from
copy_map_value_long(), so per-CPU maps both with and without special
fields copy the entire per-CPU slot. Remove the now redundant round_up()
from bpf_obj_memcpy()'s long_memcpy path. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - clear AES key schedule from stack
qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack.
That schedule contains key material and can remain in the stack frame.
Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store path halves the count for its input bound but passes the
full byte count as the utf8s_to_utf16s() output limit; use the
destination code-unit count in both directions. |
| vm2 is a sandbox for running untrusted Node.js code. In versions <= 3.11.7, NodeVM exposes the host `util` module to the sandbox as an unfiltered shallow copy (`Object.assign({}, util)` in `defaultBuiltinLoaderUtil`), and the deprecated `sys` builtin (an alias of host `util`) is exposed through the generic builtin loader. On Node.js >= 22.9 this hands sandboxed code `util.getCallSites()`, a programmatic stack-introspection API that returns the host process's full call stack, including absolute file paths, function names, and line numbers for vm2 bridge internals and the embedding application's entrypoint. This bypasses the host-frame redaction introduced for GHSA-v27g-jcqj-v8rw, which only applies to the `Error.prepareStackTrace` formatting channel. The issue is fixed in vm2 3.11.8. |
| Grav is a flat-file CMS. In versions 2.0.0-rc.1 through 2.0.21, the Twig content sandbox fails to restrict the dump and serialize filters (print_r, vardump, json_encode, yaml_encode, string): GravExtension::assertSandboxDumpSafe() determines sandbox state by calling SandboxExtension::isSandboxed() without a Source argument, which reports only the global sandbox flag that Grav never enables, so the guard added in GHSA-mc5q-6hpj-rp7j never executes. As a result, an authenticated user with page-edit rights can render {{ config|print_r }} in page content with Twig processing enabled and dump Grav's entire merged configuration — print_r reflects the real Config object held in a private property of the SandboxConfig facade, bypassing its path redaction — exposing plugin secrets such as SMTP credentials, API tokens, webhook secrets and cache backend passwords. Grav 1.7 is not affected because it ships no Twig content sandbox. The issue is fixed in 2.0.22, where the affected filters are registered with Twig's needs_is_sandboxed flag. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/efi: Avoid voluntary preemption with efi_mm installed
Gus reports a bad kernel memory access when using software PAN
(CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime
services:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 00000000f322ff30
Mem abort info:
ESR = 0x0000000096000004
FSC = 0x04: level 0 translation fault
Internal error: Oops: 0000000096000004 [#1] SMP
Workqueue: efi_rts_wq efi_call_rts
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : efi_call_rts+0xd8/0x288
Call trace:
efi_call_rts+0xd8/0x288 (P)
process_one_work+0x178/0x4f8
worker_thread+0x194/0x328
This is because the fpsimd context management code called from
__efi_fpsimd_begin() can preempt voluntarily, returning later to the EFI
code with an incorrect value for TTBR0_EL1 thanks to the deferred mm
switching used by the software PAN implementation.
Since EFI runtime services cannot preempt voluntarily and because the
fpsimd switching code does not rely on the TTBR0_EL1 mappings, simply
reorder the fpsimd switch so that it occurs before we change the
page-table. |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.1.0, the rmcp crate's StreamableHttpClientTransport in crates/rmcp/src/transport/common/reqwest/streamable_http_client.rs builds its default_http_client with reqwest's automatic redirect policy and applies caller-supplied values from StreamableHttpClientTransportConfig.custom_headers without marking them as sensitive. When a malicious or compromised MCP endpoint returns a cross-origin 307 or 308 redirect, reqwest follows the redirect and apply_custom_headers causes custom API keys or authentication tokens to be replayed to the new origin, where an attacker can capture and reuse them. The separate auth_header path is not affected because it uses the standard Authorization header, which reqwest strips on cross-origin redirects. This issue is fixed in version 2.1.0. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, when a Django `Model` instance is assigned to a public view attribute, djust serialized it to the client with no sensitive-field denylist — sending fields such as `password` (the hash), privilege flags (e.g. `is_staff` / `is_superuser`), tokens, and other PII to the browser. Because exposing model objects to templates is a normal djust pattern, this could leak credentials/PII without the developer realizing the full object crossed the wire. This is fixed in djust 1.0.7. Model serialization applies a secure-by-default sensitive-field denylist (password/hash/token/secret-style fields and known privilege flags are withheld) with an identity-subset fallback. As a workaround, keep `Model` instances on `_private` attributes and expose only the specific fields needed, until patched. |
| GravitLauncher is an open-source Minecraft launcher based on sashok724's v3. Prior to 5.7.12, an unauthenticated remote actor can send a raw HTTP request target without a leading slash to the default LaunchServer file server on port 9274. FileServerHandler.channelRead0 in components/launchserver/src/main/java/pro/gravit/launchserver/socket/handlers/fileserver/FileServerHandler.java strips the first request-target character and resolves the remaining path against updatesDir without re-normalizing and verifying containment. This leaves parent-directory components in a no-leading-slash request and allows reading any file accessible to the LaunchServer process, including .keys/ecdsa_id, .keys/legacySalt, and LaunchServer.json. Disclosure of those files can expose signing keys, refresh-token material, and database credentials, enabling forged administrative access tokens and full authentication bypass. A normalizing L7 proxy may block the primary request form, but direct exposure and L4/TCP proxies remain affected, and netty.fileServerEnabled is enabled by default. This issue is fixed in 5.7.12. |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.7. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TCP to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in takeover of Siebel CRM Deployment. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 2.14.5 to 2.16.0 and from 3.0.9 to 3.0.11, a client configured with a client-wide Realm and redirect following can disclose credentials after a cross-origin redirect because the Interceptors authentication path falls back to the client configuration after redirect handling clears the per-exchange realm. If the attacker-controlled target returns 401, the client can send Basic or Digest credentials or a Negotiate or NTLM token to that origin. Per-request realms are stripped correctly, and this issue is a residual bypass of the earlier cross-origin credential-stripping fixes. This issue is fixed in versions 2.16.1 and 3.0.12. |
| Grav is a flat-file CMS. In Grav 1.7.0 through 1.7.53.2 and 2.0.0 through 2.0.21, when the debugger is enabled (system.debugger.enabled: true, which is not the default), the Clockwork profiler endpoint is exposed without authentication: InitializeProcessor::handleDebuggerRequest() intercepts any path containing /__clockwork/ during bootstrap and passes it to Debugger::debuggerRequest(), which performs no user lookup, IP restriction, or Clockwork authenticator check, and also supports anonymous pagination over the entire stored history. With the shipped censored: false default, each stored record contains raw request cookies (including Grav's session cookie, whose value is the PHP session id, allowing an attacker to resume another user's session, including an authenticated admin's), the full parsed request body (Grav's login form posts data[username]/data[password], so passwords are stored in plaintext because Clockwork's password filter only inspects top-level keys), and the site's entire system and plugin configuration, including operator-saved secrets such as SMTP credentials, third-party API keys, and licence keys. Authorization and X-API-Token headers are stored even when censored: true. On Grav 2.0, setting provider: debugbar does not avoid the issue because Grav forces the Clockwork provider for requests preferring a JSON response. The issue is fixed in 1.7.53.4 and 2.0.22, which restrict /__clockwork/ to server-local requests or requests presenting the new system.debugger.token secret and strip cookies and credential headers from stored records. Workarounds include setting debugger.enabled: false or blocking /__clockwork/ at the web server or CDN. |
| Craft CMS 5.0.0-RC1 through versions before 5.11.0 incorrectly authorize the GraphQL draftCreator and revisionCreator fields: instead of requiring the user-data scope enforced by Gql::canQueryUsers() (usergroups.*:read), these fields are gated only on the elements.drafts:read / elements.revisions:read scopes, and their resolver returns a raw User element whose email, username, fullName, and addresses fields have no per-field authorization. A client holding only the drafts or revisions scope — including an unauthenticated client when the operator has enabled the public GraphQL schema with those scopes — can therefore harvest the email addresses, usernames, full names, and postal addresses of all draft/revision creators (typically site editors and administrators). The issue is fixed in 5.11.0. |
