| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote authenticated attacker to access or modify unauthorized resources due to the use of wildcards in RBAC permission definitions. |
| Beta9 turns each shell command in a tenant image definition into a Dockerfile RUN line and executes it with Buildah on the build worker. The worker image sets BUILDAH_ISOLATION=chroot, and no buildah invocation passes --isolation, so the step only changes its filesystem root. It keeps the worker pod's PID, network, IPC, and user namespaces, runs as uid 0, and holds CAP_DAC_OVERRIDE. PID 1 in that procfs is the worker entrypoint, so /proc/1/root is the worker container's filesystem and is writable. That filesystem contains the runc, buildah, and runsc binaries the worker uses to start tenant containers, the worker's Kubernetes service account token, and the host directories mounted into the pod. Worker pods are privileged. Clip v2 layered builds are the default, so a tenant with a workspace token reaches this by submitting one image build. The read-only proof confirmed the shared namespaces, CAP_DAC_OVERRIDE, and that the worker's runc binary is visible at /proc/1/root. Fixed in worker 0.1.756: Buildah RUN steps, including the WORKDIR mkdir, use OCI isolation with private PID, IPC, and network namespaces, and tenant ARG values are passed only into the build container. |
| SurrealDB from 3.1.0 before 3.3.0 contains an improper authentication vulnerability where the MCP BoundSubject fingerprint uses the access method name instead of per-user identity for JWT/Bearer access. Attackers with a valid low-privilege token for the same access method and a victim's mcp-session-id can hijack the session and execute MCP tools with the victim's roles and permissions. |
| Visual Studio Code Elevation of Privilege Vulnerability |
| A flaw has been found in icret EasyImage up to 2.8.7. The impacted element is an unknown function of the file app/del.php. Executing a manipulation of the argument hash can lead to improper privilege management. The attack can be launched remotely. The exploit has been published and may be used. This patch is called b12cb67d447bcbb67e21c8f011d0f5638229760c. A patch should be applied to remediate this issue. |
| A security flaw has been discovered in ken678 YznCMS up to 2.2.0. The affected element is the function Backend of the file app/admin/controller/auth/Group.php of the component Auth Group Handler. Performing a manipulation results in improper privilege management. The attack can be initiated remotely. Upgrading to version 2.2.1 is sufficient to fix this issue. The patch is named ed16cd7f7f73e0316ffa8a148d. You should upgrade the affected component. |
| The Rox Appointment Booking – Appointment Booking Scheduling Solution plugin for WordPress is vulnerable to Privilege Escalation via Mass Assignment in all versions up to, and including, 1.3.1 This is due to the public `/rox-appointment-booking/v1/public/booking` REST endpoint performing mass-assignment of the raw request body into a new customer row while `CustomerModel::$fillable` includes the internal `wp_user_id` column, allowing an unauthenticated attacker to persist an arbitrary WordPress user ID alongside an attacker-controlled email address with no authorization check. When an administrator subsequently opens the poisoned customer record and clicks Update Customer, `SaveCustomer::handleRequest()` passes the stored `wp_user_id` and attacker-supplied email to `wp_update_user()` — succeeding because `LinkedAccount::canChange()` unconditionally returns true when the acting user holds the `edit_users` capability — thereby overwriting the targeted administrator's email address and enabling full account takeover via a standard WordPress password-reset request. Successful exploitation requires an administrator to open and save the poisoned record, and the attacker must know or guess a valid administrator user ID (such as the default user ID 1). |
| Initialization of a Resource with an Insecure Default vulnerability in Hallo Welt! GmbH BlueSpice (container image bluespice/wiki) allows privilege escalation. The default value of $mwsgTokenAuthenticatorServiceCIDR in the container's LocalSettings.php was intended to restrict internal service authentication to the container network, but evaluated to an empty string when the environment variable WIKI_SERVICE_TOKEN_AUTH_ALLOWED was not set. An empty value disables the IP restriction in the token authenticator component (mwstake/mediawiki-component-token-authenticator). As a result, any user with read access to the wiki (anonymous users on publicly readable wikis) could obtain an application token from the REST API and use it to get a session with sysop privileges as the internal service user.
This issue affects BlueSpice: from 5.2.3 before 5.2.7, and the 5.2.7 container images published before 2026-10-19 15:37 UTC. |
| The Essential Addons for Elementor WordPress plugin before 6.8.8 does not correctly restrict who may set the role assigned to accounts created through its registration form, allowing authenticated users with Author-level access and above to cause newly registered accounts, including those created by unauthenticated visitors through the public registration form, to be granted a higher role such as Editor.
This is an incomplete fix of CVE-2026-5193: the role-validation control added in 6.6.0 can be circumvented by a lower-privileged user, so versions 6.6.0 through 6.8.7 remain affected even on sites that are patched against that advisory. |
| The User Frontend – Membership, User Registration, User Profile, User Directory & Content Restriction with Frontend Post Submission plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.3.13 via the `post_content` parameter of the `submit_post()` function. The vulnerability exists because the protected-shortcode blocklist guard inspects the `sanitize_textarea_field()` copy of the submitted `post_content`, while the copy actually persisted to the database is processed through `wp_kses()`, whose `wp_kses_no_null()` step strips C0 control bytes — allowing an attacker to inject a single `\x01` byte inside the `[wpuf-registration]` tag name to defeat the `strpos()` blocklist check while the clean, functional shortcode is stored verbatim; `strip_shortcodes()` does not neutralize the stored shortcode either, because the Frontend container that registers it via `add_shortcode()` is only instantiated when `is_admin()` is false, and `admin-ajax` requests have `is_admin() === true`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject a `[wpuf-registration role="editor"]` shortcode into a published post, causing a live Editor-role registration form to be rendered publicly on the frontend that any visitor — or the attacker themselves — can submit to mint a WordPress Editor account with an immediately active privileged session when the default `autologin_after_registration` setting is enabled. |
| A security flaw has been discovered in BKWLD Decoy up to 5.11.1. The impacted element is an unknown function of the file Policy.php of the component Authorization Policy. The manipulation of the argument role results in improper privilege management. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The LogixFast Auth WordPress plugin before 1.0.4 does not deliver its password-reset one-time code to the resolved account's own email address, mailing it to the address supplied in the request instead, allowing unauthenticated attackers to reset any user's password, including an administrator's, and take over the account. |
| This issue was addressed by removing additional entitlements. This issue is fixed in macOS Golden Gate 27. An app may be able to access user-sensitive data. |
| The Essential Addons for Elementor – Popular Elementor Templates & Widgets plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 6.8.7 via the `page_id` parameter of the `register_user()` function. The vulnerability exists because the handler's post status deny-list rejects `future`, `draft`, and `pending` but admits `inherit` — the status carried by every WordPress revision — allowing an attacker to substitute a revision ID for a live page ID, while a flawed "last saved by administrator" check reads `post_author` on revisions (which reflects the editing administrator) rather than the `_edit_last` meta that is never copied to revisions, and the nonce gate is rendered ineffective because any unauthenticated visitor can freely obtain a valid nonce via the `wp_ajax_nopriv_eael_get_token` endpoint. This makes it possible for unauthenticated attackers to register an account with a role as high as Editor — gaining capabilities including `edit_others_posts`, `publish_pages`, `upload_files`, and `unfiltered_html` — by naming a revision whose `_elementor_data` contains an elevated role an administrator previously saved and later reverted on a page bearing the Login/Register widget. Successful exploitation requires that the site has "Anyone can register" enabled and that an administrator has at some point saved and then reverted a non-default "New User Role" on an affected page. |
| A SpaceSupporter could improperly modify an application's start command and buildpack—actions requiring SpaceDeveloper privileges. This privilege escalation enables unauthorized retrieval of service credentials through malicious start commands or custom buildpacks. |
| An issue in WCH CH340/CH341 USB-to-Serial Windows Driver setup package CH341SER.EXE version 4.0 allows a local attacker to escalate privileges. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From 1.87.0 until 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2, the proxy reuses one cryptographic context for at-rest secrets and session tokens, allowing an authenticated internal user to have crafted metadata containing a forged administrator credential encrypted and returned by the API-key flow. Replaying that ciphertext as a bearer token causes the proxy to trust the forged proxy administrator identity, permitting administrative access and arbitrary commands through the MCP stdio endpoint. Versions 1.87.0 through 1.90.x require EXPERIMENTAL_UI_LOGIN to be enabled, while versions after 1.91.0 are exploitable in the default configuration. This issue was fixed in LiteLLM 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2. |
| The Ak Framework plugin for WordPress, included in the Newsy - Viral News & Magazine WordPress Theme, is vulnerable to Privilege Escalation in all versions up to, and including, 2.9.8. This is due to missing capability checks in the ajax_refresh_nonce and ak_admin_ajax handlers before passing attacker-controlled option names and values to update_option(). This makes it possible for unauthenticated attackers to update arbitrary WordPress options including users_can_register and default_role to escalate privileges to administrator by enabling user registration with administrator as the default role. |
| Vulnerability in the Oracle SOA Suite product of Oracle Fusion Middleware (component: Fabric Layer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle SOA Suite. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle SOA Suite accessible data as well as unauthorized update, insert or delete access to some of Oracle SOA Suite accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N). |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Privilege Management vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
