| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two bits the reset is actually responsible for instead.
RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they
belong to the caller, rds_conn_shutdown(), which waits for both to be
clear before calling the transport shutdown and this reset.
This also gives every bit in cp_flags a single well-defined writer
discipline, which the following patches rely on when they turn
RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the
teardown: a blanket store mid-teardown would destroy lock ownership
that an atomic clear preserves.
Oracle UEK carries the same conversion ("net/rds: Preserve essential
connection state flags"), motivated by its asynchronous shutdown
state machine, whose progress and destroy flags must survive the
reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL
because there the reset runs as the final step of a teardown that
owns both bits, making those clears its unlock. Upstream that
release belongs in rds_conn_shutdown(): once a later patch in this
series turns the two bits into locks held across the teardown, ending
ownership needs release semantics and a wake-up that a plain clear
inside the reset would not provide.
Based on Oracle UEK commit "net/rds: Preserve essential connection
state flags" by Gerd Rausch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
rds_tcp_reset_callbacks() quiesces the transmit path by setting the
path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to
be sampled clear before swapping the underlying socket and calling
rds_send_path_reset().
Sampling the bit clear is not the same as owning it: rds_send_xmit()
can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its
state recheck after taking the lock is a store-buffering pattern (the
resetter writes the state and reads the bit, the sender writes the
bit and reads the state) and acquire_in_xmit() is only an acquire
operation, so on weakly ordered architectures both sides can miss
each other's write and the transmit path then runs concurrently with
rds_send_path_reset() rewriting cp_xmit_* state - which is exactly
what the comment above rds_send_path_reset() tells its callers to
prevent.
Take the lock instead, hold it across the socket swap and
rds_send_path_reset(), and release it with a wake-up at the end. The
lock-ordering constraint documented above the wait still holds: the
lock is acquired before lock_sock(), so a sender inside tcp_sendmsg()
can never be waited on while we hold the socket lock.
Two details of the old code go away with the same change:
- t_sock is now read only after the lock is acquired. The old code
cached it before waiting; the teardown in rds_conn_shutdown()
releases that socket and clears t_sock, so a pointer cached before
the wait can be stale by the time the accept path resumes. Reading
it under RDS_IN_XMIT is what makes the exclusion complete once the
teardown owns the same lock, which the next patch arranges; until
then the teardown still only samples the bit, and the two paths
remain as exposed to each other as they are today.
- The old !osock early path called rds_send_path_reset() with no
serialization at all. It now runs under the lock like the normal
path. The conditional RDS_CONN_RESETTING transition of the
previous patch happens before the socket check either way: a path
found without a socket is either still connecting (its reconnect
worker blocked on t_conn_path_lock) and legitimately goes
RESETTING -> UP on the new socket, or it has been torn down
meanwhile and is dropped.
The in-function comment describing the old wait-based quiesce is
rewritten to describe the lock-based one, and the stale block comment
above the function (which still described a return value and an
incomplete list of t_sock writers) is refreshed to name all four
writers - the connect, accept, teardown and swap paths - and what
serializes each of them. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op. For the FIN case that is harmless - the socket the FIN
arrived on is the very socket the teardown just released. It is not
harmless for a dropper that attached something to the path first.
rds_tcp_accept_one() is such a dropper. Its path claim in
rds_tcp_accept_one_path() transitions RDS_CONN_DOWN ->
RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous
socket in softirq context, an administrative reset - can put the path
into RDS_CONN_ERROR between that claim and the state check that
follows, which accepts RDS_CONN_ERROR. The accept then installs the
freshly accepted socket with rds_tcp_set_callbacks() while the queued
teardown - which sampled tc->t_sock before this socket existed - is
still running. rds_connect_path_complete() fails its transition to
RDS_CONN_UP and drops the path again, queueing the pass that should
reap the socket it just installed. If the in-flight shutdown's final
transition consumes that drop's RDS_CONN_ERROR, the queued pass finds
the path in RDS_CONN_DOWN and does nothing. The installed socket is
never torn down: it sits established with its callbacks armed and its
rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that
nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some
later event drops it again. Reproduced with widened race windows as
an ever-growing receive queue on a socket owned by a path stuck in
RDS_CONN_DOWN, with the peer's send path wedged behind it.
Make the final transition only DISCONNECTING -> DOWN. If it fails
because the path is in RDS_CONN_ERROR, a drop raced the teardown:
cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one
piece of the skipped tail that must not be left behind - and return,
letting the pass the drop queued finish the job: it tears down
whatever attached to the path in the meantime, completes the
transition to RDS_CONN_DOWN, and re-arms the reconnect from its own
tail.
The timer quiesce in that branch matters because the racing drop does
not always queue that pass: rds_conn_path_drop() returns without
queueing when a destroy is pending - exactly the situation during a
netns teardown or module unload, when a FIN on the dying socket is
processed while rds_conn_path_destroy() flushes cp_down_w. If the
flushed pass is the one that takes this return, no later pass exists,
and rds_conn_path_destroy() would find cp_conn_w still armed
(WARN_ON) and then free a path whose reconnect timer can still fire.
With the cancel in the branch, every exit of a shutdown pass leaves
the timer quiesced no matter which pass completes the transition.
The FIN case keeps making progress, one pass later and still without
noisy logging. Any other state keeps today's rds_conn_path_error()
handling; no current cp_state writer can leave a DISCONNECTING path
in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from
a non-DISCONNECTING state), so that branch is defensive.
On kernels without the preceding patches the same hazard exists with
the sample-based quiesce; the fix applies there equally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: cope with concurrent instance destruction
Instances are refcounted. However, only memory release happens on the
1 -> 0 transition; the unlink from hashes can occur with any refcount.
Uncooperative userspace can force a situation where a queue is pending
for destruction from netlink event while a different socket with same
portid processes an UNBIND request.
With right timing, this will unhash the instance again:
Oops: general protection fault, [..]
Call Trace:
<TASK>
nfulnl_recv_config+0x31a/0xd50
nfnetlink_rcv_msg+0x7c2/0xeb0 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx
vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value
into v->config_ctx before checking it, so on failure the field briefly
holds an ERR_PTR:
ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd);
swap(ctx, v->config_ctx);
if (!IS_ERR_OR_NULL(ctx))
eventfd_ctx_put(ctx);
if (IS_ERR(v->config_ctx)) {
long ret = PTR_ERR(v->config_ctx);
v->config_ctx = NULL;
return ret;
}
Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if
eventfd_ctx_fdget() fails") added that clearing, and spelled out the
invariant the rest of the file relies on: "we consider 'v->config_ctx'
valid if it is not NULL". The window between the swap and the clearing
still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config
interrupt delivered inside the window hands the ERR_PTR to
eventfd_signal().
Check the fd before installing it instead. That closes the window and
matches how vhost_vring_ioctl() handles the same failure for the vq call
fd.
It also stops a rejected fd from tearing down a config interrupt that was
working: until now the swap replaced the live context and put it, so
after an EBADF the device silently stopped delivering config interrupts
until userspace installed a new fd. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reloc root cleanup in merge_reloc_roots()
If the root we got has zero root refs in its root item, we are resetting
the root's ->reloc_root without using barriers like we do everywhere else.
Sashiko complained about this while reviewing another patch, and it's
correct (see the Link tag below).
Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless
the root points to the reloc root we have.
Fix this by using clear_reloc_root(), which issues the memory barrier
after setting the root's ->reloc_root to NULL and before clearing the bit
BTRFS_ROOT_DEAD_RELOC_TREE from the root. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race
Commit ba7425312607 ("mm, slab: add an optimistic
__slab_try_return_freelist()") incorrectly assumed that nobody has freed
an object to the slab as long as slab->freelist is NULL and cmpxchg
succeeds.
However, as reported by Hyunwoo Kim [1], other CPUs might have freed
an object to the slab, insert the slab to the partial list, then
allocated an object from the slab, and be in the middle of removing
the slab from the list under n->list_lock.
Since __refill_objects_node() puts the slab back on pc.slabs
outside n->list_lock, it might insert the slab into that list while
the slab is concurrently being removed from n->partial.
This led to a list corruption [1]:
list_add corruption. next->prev should be prev
(ffff888100000248), but was dead000000000122.
(next=ffffea000416e410).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted
7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy)
RIP: 0010:__list_add_valid_or_report+0x80/0xd0
...
Call Trace:
alloc_from_new_slab+0x183/0x300
___slab_alloc+0x31c/0x890
__kmalloc_noprof+0x3d4/0x800
lsm_blob_alloc+0x2d/0x50
security_msg_msg_alloc+0x26/0x90
load_msg+0x1aa/0x210
do_msgsnd+0x91/0x800
do_syscall_64+0x109/0x5d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Kernel panic - not syncing: Fatal exception
This is a classic ABA problem where cmpxchg succeeds but the state has
changed since __refill_objects_node() took the freelist from the slab.
As Vlastimil Babka mentioned [2], it should be rare to return more than
one slab (due to the racy read of slab->counters in
get_partial_node_bulk()). Therefore, instead of introducing additional
complexity, acquire and release n->list_lock twice in the worst case.
Return the slab directly to the partial list and hold n->list_lock
across the cmpxchg and add_partial(). This is similar to the initial
version of commit ba7425312607 [3]. This is enough to avoid the race as
the list manipulation is serialized by n->list_lock. While at it,
bring back unlikely() hint now that the condition is unlikely. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| A race condition in the ZPA tunnel handler of affected versions of Zscaler Client Connector (ZCC) allows a heap corruption, resulting in a denial of service (client crash) and potentially arbitrary code execution in the context of the ZCC process. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: handle data disappearing from under the TLS ULP
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place. |
| In the Linux kernel, the following vulnerability has been resolved:
rseq: Prevent hard lockup on granted time slice extension
__exit_to_user_mode_loop() invokes rseq_grant_timeslice_extension() with
interrupts enabled. If the extension is granted it invokes
hrtimer_rearm_deferred_tif() to ensure that a pending deferred hrtimer
rearm is handled before exiting to user space.
Though this invokes __hrtimer_rearm_deferred() which expects to be invoked
with interrupts disabled as it takes hrtimer_cpu_base::lock with
raw_spin_lock(). That's a livelock waiting to happen and caught by lockdep:
WARNING: ./include/linux/hrtimer_rearm.h:17 at irqentry_exit, CPU#1: slice_test
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
Prevent this by disabling interrupts around the invocation of
hrtimer_rearm_deferred_tif() in rseq_grant_timeslice_extension().
[ tglx: Massaged change log ] |
| A vulnerability was identified in Linux Kernel up to 4.19.316/5.4.278/5.10.220/5.15.161. This impacts the function tcp_getsockopt/tcp_setsockopt of the component TCP Handler. Such manipulation leads to race condition. A high complexity level is associated with this attack. The exploitability is said to be difficult. The vulnerability was introduced in 2.6.12, commit 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2"). Upgrading to version 4.19.317, 5.4.279, 5.10.221, 5.15.162 and 6.1 will fix this issue. The name of the patch is fcd31dd8291b23d713245947ec2b2d99ef07aef2/3b32f265805a49071e2c4568a524398ba22bf93c/d529193eae979a7bf2255cd9fe68b7af7a1c91b3/5bb642cc3355ffd3c8bca0a8bd8e6e65bcc2091c/f49cd2f4d6170d27a2c61f1fecb03d8a70c91f57. The affected component should be upgraded. |
| Race condition in the JavaScript Engine component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
