| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
Both create_queue_cpsch() and create_queue_nocpsch() unconditionally
call mqd_mgr->restore_mqd() when a CRIU restore is in progress
(qd != NULL), with no NULL guard. On any system where restore_mqd is
not implemented for the given queue type, a user holding
CAP_CHECKPOINT_RESTORE can trigger a kernel NULL pointer dereference
and panic the machine by issuing KFD_IOC_CRIU_OP_RESTORE with a
crafted queue restore object. Note that checkpoint_mqd is likewise
unimplemented on GFX12, so no legitimate CRIU image can reach this
path — only a hand-crafted restore payload.
Add a NULL guard for restore_mqd immediately after mqd_mgr is
resolved, unwinding via the existing error labels and returning
-EOPNOTSUPP if the callback is not implemented. This mirrors the
existing checkpoint_mqd guard in checkpoint_mqd(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Guard against NULL driver_data in i915_pci_probe()
pci_match_device() can return the dummy pci_device_id_any entry
when a device is force-bound via sysfs driver_override, in which
case ->driver_data is unset (NULL). i915_pci_probe() casts it to
struct intel_device_info * unconditionally and dereferences
intel_info->require_force_probe, causing a NULL-ptr-deref.
(cherry picked from commit 2727922084672cc274ecea726ea00363c2893731) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check
qla_chk_edif_rx_sa_delete_pending() obtains the SCSI command via
GET_CMD_SP(sp) and immediately dereferences cmd->sc_data_direction.
That command pointer can be NULL: the firmware may post a status
completion for a command that has already been returned or aborted. The
caller qla2x00_status_entry() acknowledges this on the very same status
path, re-fetching GET_CMD_SP(sp) and bailing out with the "Command
already returned" message when it is NULL -- but that check runs only
after qla_chk_edif_rx_sa_delete_pending() has already dereferenced the
pointer, so a NULL cmd crashes the kernel in interrupt context.
Return early when cmd is NULL, before touching cmd->sc_data_direction. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix DMA mapping ownership on partial map failure
If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps
TX but leaves tx_sg_mapped set. If TX mapping fails on a later
transfer, mappings created for earlier transfers remain active.
In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they
are assigned only after every transfer has been mapped. The subsequent
spi_unmap_msg() may therefore unmap the TX mapping again or release
earlier mappings using a NULL or stale device. Using a NULL device can
trigger an oops. An empty SG table does not prevent the NULL dereference
because dma_unmap_sg_attrs() accesses the device before checking the
entry count.
Publish both mapping devices before mapping starts and unwind all
failures through __spi_unmap_msg(). This clears the mapping flags and
releases each mapping once with the device that created it.
Publishing the devices before the loop also refreshes them when no
transfer needs mapping. No mapping flag is set in that case, so current
users do not use the pointers as mapping owners. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb_cma: fix null nodemask dereference in hugetlb_cma_alloc_frozen_folio
alloc_buddy_hugetlb_folio_with_mpol() can pass a NULL nodemask to
alloc_fresh_hugetlb_folio() as a fallback to allocate from all nodes. If
order is gigantic, alloc_fresh_hugetlb_folio() propagates the NULL
nodemask down to hugetlb_cma_alloc_frozen_folio() via
alloc_gigantic_frozen_folio().
Additionally, hugetlb_cma_alloc_frozen_folio() previously attempted
allocation on hugetlb_cma[nid] without verifying if nid is included in the
caller's nodemask. Adding a node_isset(nid, *nodemask) check ensures the
initial preferred node allocation honors the memory policy / nodemask.
However, hugetlb_cma_alloc_frozen_folio() dereferences the nodemask in
node_isset(nid, *nodemask) and for_each_node_mask(node, *nodemask),
leading to a null pointer dereference kernel panic when nodemask is NULL.
Fix this by checking if nodemask is NULL in
hugetlb_cma_alloc_frozen_folio() and defaulting it to
cpuset_current_mems_allowed. Enclose the allocation attempts within the
cpuset seqcount retry loop so that if the cpuset changes concurrently
during allocation, the attempts are retried using the updated nodemask.
This ensures that the initial node check and fallback loop safely honor
the task's cpuset without violating cpuset constraints or causing NULL
pointer dereferences or unexpected allocation failures.
From a userspace perspective, this bug allows an unprivileged user to
crash the kernel (trigger a panic) by requesting a gigantic hugepage
allocation with MPOL_PREFERRED_MANY on a system where CMA is only
configured on a subset of NUMA nodes.
This can be reproduced by booting a VM with two NUMA nodes, restricting
CMA to Node 1 (e.g., hugetlb_cma=1:1G default_hugepagesz=1G hugepagesz=1G
hugepages=0), and running a program that allocates a 1GB hugepage area
without reserving, restricts allocation to Node 0 using mbind() with
MPOL_PREFERRED_MANY, and triggers a page fault:
void *ptr = mmap(NULL, 1UL << 30, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB |
MAP_HUGE_1GB | MAP_NORESERVE, -1, 0);
unsigned long nodemask = 1; /* Node 0 */
mbind(ptr, 1UL << 30, MPOL_PREFERRED_MANY, &nodemask,
sizeof(nodemask) * 8, 0);
memset(ptr, 0, 1UL << 30); /* Trigger fault */
This results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:hugetlb_cma_alloc_frozen_folio+0x75/0x120
Call Trace:
<TASK>
only_alloc_fresh_hugetlb_folio.isra.0+0x2c/0x160
alloc_surplus_hugetlb_folio+0x6d/0x100
alloc_hugetlb_folio+0x3c5/0x660
hugetlb_no_page+0x3d9/0x650 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
Previously fsg_num_buffers_validate() was removed as it was not
necessary due to Kconfig setting the limits for n from 2 to 256 with
default as 2. However, setting the page content in such a way that
kstrtou8() reflects n value as either 0 or 1 bypasses these
restrictions leading to a null pointer dereference if n is 0. Fix
this by adding a check for n < 2 and returning -EINVAL if n is
either 0 or 1 consistent with Kconfig logic. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before
dw_edma_channel_setup() fills the back pointer. A shared interrupt can
therefore enter the handler with dw_irq->dw still NULL, leading to a
NULL pointer dereference.
Set the back pointer before installing each handler. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but
dev->state is checked after acquiring the lock. Therefore a concurrent
bind can change the device state between these operations, which can
leave ioctl with a stale NULL gadget pointer and causing a NULL pointer
dereference at gadget->ops->ioctl.
Read dev->gadget while holding dev->lock so that the gadget pointer
and device state are sampled consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
The ap_driver structure has two fields which are function pointers to
callbacks:
* .on_config_changed: called at the start of the AP bus scan function to
notify the device driver that the host AP
configuration has changed and the associated AP
devices will be added or removed accordingly. This
gives the implementor a chance to evaluate the
configuration changes and respond to them before
the associated devices are added or removed.
* .on_scan_complete: Called at the end of the AP bus scan function to
notify the device driver that the host AP
configuration has changed and the AP devices have
been added or removed accordingly. This gives the
implementor the opportunity to respond to the
changes after the associated devices are added or
removed.
These two callbacks are implemented in the vfio_ap device driver via the
vfio_ap_on_cfg_changed and vfio_ap_on_scan_complete functions respectively.
Within the call stack of these two callback functions the
matrix_mdev->kvm->lock mutex is taken without checking whether
matrix_mdev->kvm is NULL or not. If matrix_mdev->kvm has never been set,
trying to take the lock will trigger a NULL pointer dereference. This patch
adds checks for matrix_mdev->kvm == NULL before taking the
matrix_mdev->kvm->lock mutex.
Note that the matrix_mdev->kvm->lock mutex taken in the
vfio_ap_mdev_hot_plug_config function is moved to the calling function
along with the matrix_dev->mdevs_lock which is needed there to access
the fields of the matrix_mdev. It makes little sense to make the change
the check for matrix_mdev->kvm there before taking the kvm->lock
mutex only to have to move it out via another patch, so it is done in
this patch.
It is important to make note of the following:
1. The matrix_dev->guests_lock is acquired at the start of both callback
functions. This ensures that matrix_mdev will not be removed via the
vfio_ap_mdev_remove function because it too takes matrix_dev_guests_lock
before removing the object; so, matrix_mdev will be available for the
duration of the callback functions.
2. The matrix_dev->mdevs_lock mutex must be taken in order to access
fields within the matrix_mdev structure
3. matrix_mdev->kvm->lock mutex must be taken before the
matrix_dev->mdevs_lock to prevent a lockdep splat.
4: The kvm->lock must be held while plugging the guest's AP configuration
into its SIE state description via the vfio_ap_mdev_update_guest_apcb
function.
5. The vfio_ap_mdev_update_guest_apcb checks matrix_mdev->kvm to verify it
is not NULL before doing the hot plug of the guest's AP configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec_file: Fix null-ptr-def in extra size calculation
A static Sashiko AI review identified a potential NULL pointer
dereference in kexec_extra_fdt_size_ppc64().
On platforms without any reserved memory regions,
get_reserved_memory_ranges() can return 0 while leaving 'rmem'
unallocated as NULL. Passing it directly leads to a kernel panic when
evaluating 'rmem->nr_ranges'.
Add a NULL check for 'rmem' to prevent this crash. |
| In the Linux kernel, the following vulnerability has been resolved:
media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref
airspy_disconnect() clears s->udev under v4l2_lock, but
airspy_stop_streaming() unconditionally calls airspy_ctrl_msg() and
airspy_free_stream_bufs() afterwards. If a streaming user closes the
device after disconnect, stop_streaming() runs and dereferences the
NULL s->udev:
airspy_stop_streaming()
airspy_ctrl_msg(s, CMD_RECEIVER_MODE, 0, 0, NULL, 0)
usb_sndctrlpipe(s->udev, 0) /* NULL deref */
airspy_free_stream_bufs(s)
usb_free_coherent(s->udev, ...) /* NULL deref */
The airspy driver uses vb2_fop_release() in its file_operations, so
replace video_unregister_device(&s->vdev) with
vb2_video_unregister_device(&s->vdev) and move it before clearing
s->udev. vb2_video_unregister_device() releases the vb2 queue, which
synchronously runs airspy_stop_streaming() if streaming is active, so
the URBs, coherent DMA stream buffers and the hardware stop control
message all execute while s->udev is still valid.
vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock)
internally, and stop_streaming() locks v4l2_lock, so the previous outer
mutex_lock(&s->vb_queue_lock) / mutex_lock(&s->v4l2_lock) pair around
the unregister sequence would self-deadlock and has been removed. A
short v4l2_lock critical section around s->udev = NULL remains so any
ioctl path that still holds the file descriptor sees coherent state.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()
dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the
buffer. validate_hash_algo() passes the result straight to
integrity_audit_msg() without checking. ERR_PTR is not NULL, so
integrity_audit_message() sees a valid pointer and calls strlen() on
it, which faults:
BUG: unable to handle page fault for address: ffffffffffffffdc
RIP: 0010:strlen+0x30/0xa0
Call Trace:
audit_log_untrustedstring+0x19/0x30
integrity_audit_message+0x366/0x4f0
ima_inode_setxattr+0x512/0x5f0
Check for IS_ERR() and use NULL instead, which makes the audit message
skip the name= field instead of crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: fix null pointer dereference in usb_put_function_instance()
usb_put_function_instance() attempts to dereference fd inside fi struct
to get mod in uvc_alloc_inst() error path. However, fd is not allocated
until later in try_get_usb_function_instance() after allocating fi in
uvc_alloc_inst() and thus guranteed to be null in error path. Fix this
by adding a null check for fi->fd that returns if fd is null. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: avoid deleting unlinked ASC entry on link error
v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.
If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.
Do not delete asc_subdev_entry from err_call_unbind. There is no list
insertion to undo on this path; the bound callback and sub-device
registration are the operations that need to be rolled back. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: handle region split failure in apply_min_nr_regions()
damon_apply_min_nr_regions() repeatedly split each region until its size
becomes small enough to meet the user-defined low limit of the number of
regions. The loop assumes the split operation (damon_split_region_at())
will always succeed and create the new region. But the operation could
silently fail for memory allocation failures, for example.
If such failure happens and the region was the last region, the linked
list-based next region fetching returns invalid pointer. As a result,
invalid memory dereference and corruption could happen. Even if the
corner case is handled, it imposes stress to the allocator by trying split
regions for other targets. Fix the issue by breaking all the loops for
any region split failure.
This means there could be a min_nr_regions violation. It will only rarely
happen since the allocation is arguably too small to fail. Even if it
happens, it is only temporal. damon_apply_min_nr_regions() will be called
again after the aggregation interval.
The user impact of the issue should be minor, since the allocation is
arguably too small to fail. But, it could still theoretically happen, and
the consequence is very bad.
This issue was discovered [1] by Sashiko. |
| A flaw has been found in Freedesktop Poppler 26.07.0. Impacted is the function JBIG2Stream::rewind of the file poppler/JBIG2Stream.cc. This manipulation causes null pointer dereference. It is possible to initiate the attack remotely. The exploit has been published and may be used. Upgrading to version 26.08.0 is recommended to address this issue. Patch name: 5e49250f13b0390edeb3f90eb4c02c9941f97067. Upgrading the affected component is advised. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
When the device is enumerated through its ACPI HID (IFX3100),
i2c_client_get_device_id() returns NULL: the ACPI-derived client name
does not match the driver's i2c_device_id table. dps310_probe() then
dereferences that NULL pointer in "iio->name = id->name" and crashes the
kernel during probe.
The IIO device name is always "dps310", so set it directly and drop the
now-unused device-id lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL
check and again when assigning it to req. The map slot is cleared by
qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock)
during queue teardown, while the response-queue interrupt that drives
qla2x00_error_entry() is still registered (the IRQ is released later in
qla25xx_free_rsp_que()). If the slot is set to NULL between the two
reads, req becomes NULL and is dereferenced.
Read the slot once into req and NULL-check the local before use. mq_lock
is a mutex and cannot be taken from interrupt context, so the single
read plus local check is the appropriate fix for the reported NULL
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: check MMIO mapping errors in probe
devm_platform_ioremap_resource() returns an error pointer when the register
resource cannot be mapped. ethosu_probe() stores it and continues until
initialization dereferences it through MMIO accessors.
Return the mapping error before initializing the device. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting
to clean up an endpoint that was never initialized.
When configuring the MIDI 2.0 gadget via configfs and setting the block
direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out
endpoint is explicitly skipped during the gadget bind phase
(f_midi2_bind()). As a result, the usb_ep->card field remains NULL.
Later, when the host sets the alternate setting, f_midi2_set_alt()
unconditionally stops both the IN and OUT endpoints by calling
f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both
endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized
midi1_ep_out, it attempts to dereference usb_ep->card to determine the
number of requests to free, leading to a crash.
Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs
in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during
f_midi2_init_ep() and remains 0 if the endpoint was never initialized,
safely avoiding the loop. For consistency, apply the same change to
f_midi2_alloc_ep_reqs().
Oops: general protection fault, probably for non-canonical address
0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777]
...
RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166
[inline]
RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0
drivers/usb/gadget/function/f_midi2.c:1246
...
Call Trace:
<TASK>
f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296
composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933
configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877 |
