| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.23.2, when WITH_UNCOMPRESSED_CODEC is enabled, heif_context_add_image_tile() accepts an independently constructed tile whose component-plane dimensions do not match the tile geometry established by the prototype image. ImageItem_uncompressed::add_image_tile() passes that tile directly to unc_encoder::encode_tile(), which lacked the check_component_sizes() gate and sizes its output from the configured tile geometry while copying the tile's actual component-plane dimensions. An oversized component plane can therefore make unc_encoder_component_interleave::encode_tile() copy attacker-controlled data beyond the heap output buffer. This issue is fixed in version 1.23.2. |
| In Vinyl Cache before 9.0,2, workspace buffer overflow vulnerability was found in the .upper() and .lower() string type methods of VCL. This can be used as a remote denial of service (DoS) vector to make the child process segfault or assert, and then restart. Effectively exploiting this vulnerability requires prior knowledge about the VCL in use and the ability to craft a request that contains a string that is long enough to fill the remaining workspace at the call site while staying under the different request size limits (http_req_size, http_req_hdr_len, etc.). |
| An out-of-bounds write vulnerability exists in some of the Ethernet switches because of improper validation of the username field length during Web login processing. This may allow a remote attacker to submit a specially crafted overly long input, triggering a buffer overflow that can cause the authentication process to crash and result in a Denial of Service (DoS) attack. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34
Write of size 4 at addr c5e90480 by task binder/73
imx6q_cpufreq_probe from platform_probe+0x88/0xe4
platform_probe from really_probe+0x108/0x384
bind_store from kernfs_fop_write_iter+0x1b4/0x28c
The write lands one u32 past the end of the allocation.
soc_opp_count is only read a few lines below the loop that fills it, so it
never needed static storage. Make it a local. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix out-of-bounds access in mmio copy helpers
mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to
ALIGN(len, 4), so a length that is not a multiple of four reads past the
source buffer (write_copy) or writes past the destination (read_copy).
Copy the aligned body in the loop and handle the remaining tail through a
4-byte bounce buffer, keeping the register access width unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[]
band_idx comes from a 2-bit descriptor field (0-3) and was used directly
to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the
result. A corrupt or reserved descriptor value could index out of bounds
or hit a NULL phy on parts with fewer bands. Reject invalid band indices,
mirroring mt7996_rx_get_wcid(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix offset warn check for bpf_res_spin_lock
Sashiko pointed out correctly that the case statement for
BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK.
Fix it by checking res_spin_lock_off instead. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Move optimized uprobe from nop5 to nop10
Andrii reported an issue with optimized uprobes [1] that can clobber
redzone area with call instruction storing return address on stack
where user code may keep temporary data without adjusting rsp.
Fixing this by moving the optimized uprobes on top of 10-bytes nop
instruction, so we can squeeze another instruction to escape the
redzone area before doing the call, like:
lea -0x80(%rsp), %rsp
call tramp
Note the lea instruction is used to adjust the rsp register without
changing the flags.
We use nop10 and following transformation to optimized instructions
above and back as suggested by Peterz [2].
Optimize path (int3_update_optimize):
1) Initial state after set_swbp() installed the uprobe:
cc 2e 0f 1f 84 00 00 00 00 00
From offset 0 this is INT3 followed by the tail of the original
10-byte NOP.
After a previous unoptimization bytes 5..9 may still contain the
old call instruction, which remains valid for threads already there.
2) Rewrite the LEA tail and call displacement:
cc [8d 64 24 80 e8 d0 d1 d2 d3]
From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not
executable entry points while byte 0 is trapped.
3) Publish the first LEA byte:
[48] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this is:
lea -0x80(%rsp), %rsp
call <uprobe-trampoline>
Unoptimize path (int3_update_unoptimize):
1) Initial optimized state:
48 8d 64 24 80 e8 d0 d1 d2 d3
Same as 3) above.
2) Trap new entries before restoring the NOP bytes:
[cc] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this traps. A thread that had already executed the
LEA can still reach the intact CALL at offset 5.
3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped
and byte 5 as CALL.
cc [2e 0f 1f 84] e8 d0 d1 d2 d3
From offset 0 this still traps. Offset 5 is still the CALL for any
thread that was already past the first LEA byte.
4) Publish the first byte of the original NOP:
[66] 2e 0f 1f 84 e8 d0 d1 d2 d3
From offset 0 this is the restored 10-byte NOP; the CALL opcode and
displacement are now only NOP operands. Offset 5 still decodes as
CALL for a thread that was already there.
Tthere is only a single target uprobe-trampoline for the given nop10
instruction address, so the CALL instruction will not be changed across
unoptimization/optimization cycles.
Therefore, any task that is preempted at the CALL instruction is guaranteed
to observe that CALL and not anything else.
Note as explained in [2] we need to use following nop10:
PF1 PF2 ESC NOPL MOD SIB DISP32
NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1)
which means we need to allow 0x2e prefix which maps to INAT_PFX_CS
attribute in is_prefix_bad function.
Also changing the uprobe syscall error when called out of uprobe
trampoline to -EPROTO, so we are able to detect the fixed kernel.
The optimized uprobe performance stays the same:
uprobe-nop : 3.129 ± 0.013M/s
uprobe-push : 3.045 ± 0.006M/s
uprobe-ret : 1.095 ± 0.004M/s
--> uprobe-nop10 : 7.170 ± 0.020M/s
uretprobe-nop : 2.143 ± 0.021M/s
uretprobe-push : 2.090 ± 0.000M/s
uretprobe-ret : 0.942 ± 0.000M/s
--> uretprobe-nop10: 3.381 ± 0.003M/s
usdt-nop : 3.245 ± 0.004M/s
--> usdt-nop10 : 7.256 ± 0.023M/s
[1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/
[2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: debug: fix off by on in rtw89_ppdu_str()
This > comparison should be >= to avoid an out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap
bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap
flags, but a read-only mapping can still retain VM_MAYWRITE. nd later
be upgraded with mprotect(PROT_WRITE). This can bypass the write check
that only runs at mmap time.
Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page
branch, matching the existing policy that userspace writes are not
expected for these pages. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate connected lane counts
The connected lane count is used by TX equalization code to index arrays
sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts
before they can be propagated. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet: pep: do not write beyond optlen in getsockopt
pep_getsockopt() clamps the reported length to the caller's buffer with
min_t(), but then stores the value with put_user(val, (int __user *)
optval), which always writes sizeof(int) bytes. A getsockopt() call with
an optlen smaller than sizeof(int) thus reports the clamped length yet
writes a full int, one to three bytes past the user buffer.
Write the value with copy_to_user() bounded by len, so at most optlen
bytes are copied, matching the length reported back to userspace. |
| Hamlib is a ham radio control library for radios, rotators, and amplifiers. Prior to 4.7.2, the unauthenticated rigctld send_raw command on TCP port 4532 reaches rigctl_send_raw() in tests/rigctl_parse.c, which writes a NUL byte at buf[buf_len + 1] outside its 200-byte stack buffer, and rig_send_raw() in src/rig.c, which copies reply_len - 1 bytes instead of the actual nbytes received. A remote client can send the CR terminator with a short payload to trigger both flaws in one command under the default no-password configuration. The out-of-bounds write can crash the daemon or corrupt adjacent stack memory, while the oversized copy can return up to 198 bytes of uninitialized stack data to the client. This issue is fixed in version 4.7.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local_page() usage in compress
Several compressed I/O paths discard the address returned by
kmap_local_page() and later access or unmap the page using page_address().
This is invalid for highmem pages, and local mappings must also be unmapped
using the address returned by kmap_local_page().
Map each destination page in ntfs_decompress() only while producing the
current sub-block. Use memcpy_from_page(), memcpy_to_page(), and
memzero_page() for the other page accesses. Remove unnecessary local
mappings from ntfs_write_cb(), where pages are accessed through the vmap()
mapping. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1, A crafted cineon file can supply a numberofelements value greater than the format maximum of eight. cineoninput::open() uses that unchecked value as the loop bound while filling the fixed strings[8] array, writing pointers beyond the stack buffer and into adjacent state, resulting in memory corruption and denial of service. The affected implementation is identified by src/cineon.imageio/cineoninput.cpp, CineonInput::open(), numberOfElements, and strings[8], which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1. |
| SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. In 0.9.10 and earlier, psd_private_sail_pixel_format() in src/sail-codecs/psd/helpers.c resolves a one-channel PSD in Bitmap color mode to SAIL_PIXEL_FORMAT_BPP1_INDEXED without requiring the file depth to be one, so the pixel buffer uses one-bit rows while sail_codec_load_frame_v8_psd() in src/sail-codecs/psd/psd.c accepts depth == 8 and writes one attacker-controlled byte per pixel. Loading a crafted PSD through sail_load_from_file() or sail_load_from_memory() therefore writes beyond each heap row, causing memory corruption, a reliable crash, or potential code execution. This mode/depth mismatch is distinct from GHSA-rcqx-gc76-r9mv and GHSA-wcj8-hxxf-pq2c. This issue is fixed in version 1.0.0. |
| Imager::File::PNG versions from 1.003 before 1.004 for Perl write past the end of the row buffer reading a PNG with a tRNS transparency chunk in read_direct8.
With a tRNS chunk, read_direct8() adds an alpha channel to the image it creates but still sizes the row buffer from the original channel count. libpng expands the transparency into that extra channel, so png_read_row() fills one channel more than the buffer holds, at one byte per sample, and writes width bytes past the end of the allocation. Palette images go to read_paletted() and 16-bit images to read_direct16(), which sizes its buffer from png_get_rowbytes() and allocates enough for the expanded row.
The same reader ships bundled in the Imager distribution.
Reading an attacker-supplied PNG through Imager->read() corrupts the heap, which can crash the process. |
| Memory Corruption when processing data with large offset and length values exceeds buffer limits during data copy operations. |
| snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in Snappy.compress(ByteBuffer, ByteBuffer) that writes past the end of the destination buffer. Attackers can supply incompressible data that exceeds the destination buffer's remaining capacity, corrupting off-heap memory and causing JVM termination. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_v3_module module. When using HTTP/3 with OpenSSL versions <= OpenSSL 3.5.0 under certain configurations, a limited heap buffer overflow could happen while processing a TLS handshake. This can happen in a non-deterministic manner that is beyond the attacker's control. This may cause a heap buffer overflow in the NGINX worker process leading to a restart and/or limited data corruption.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or limited data corruption. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
