| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CGGMP24 is a state-of-art ECDSA TSS protocol that supports 1-round signing (requires 3 preprocessing rounds), identifiable abort, and a key refresh protocol. Prior to version 0.6.3, there is a missing check in the ZK proof that enables an attack in which single malicious signer can reconstruct full private key. This issue has been patched in version 0.6.3, for full mitigation it is recommended to upgrade to cggmp24 version 0.7.0-alpha.2 as it contains more security checks. |
| An issue in D-Link COVR 1100, 1102, 1103 AC1200 Dual-Band Whole-Home Mesh Wi-Fi System (Hardware Rev B1) truncates Wireless Access Point Passwords (WPA-PSK) allowing an attacker to gain unauthorized network access via weak authentication controls. |
| Improper fingerprint validation in the TeamViewer Client (Full & Host) prior Version 15.54 for Windows and macOS allows an attacker with administrative user rights to further elevate privileges via executable sideloading. |
| rfc3161-client is a Python library implementing the Time-Stamp Protocol (TSP) described in RFC 3161. Prior to version 1.0.3, there is a flaw in the timestamp response signature verification logic. In particular, chain verification is performed against the TSR's embedded certificates up to the trusted root(s), but fails to verify the TSR's own signature against the timestamping leaf certificates. Consequently, vulnerable versions perform insufficient signature validation to properly consider a TSR verified, as the attacker can introduce any TSR signature so long as the embedded leaf chains up to some root TSA. This issue has been patched in version 1.0.3. There is no workaround for this issue. |
| An acceptance of extraneous untrusted data with trusted data vulnerability has been identified in Moxa’s Ethernet switches, which allows attackers with administrative privileges to manipulate HTTP Host headers by injecting a specially crafted Host header into HTTP requests sent to an affected device’s web service. This vulnerability is classified as Host Header Injection, where invalid Host headers can manipulate to redirect users, forge links, or phishing attacks. There is no impact to the confidentiality, integrity, and availability of the affected device; no loss of confidentiality, integrity, and availability within any subsequent systems. |
| Authen::SASL::Perl::DIGEST_MD5 versions 2.04 through 2.1800 for Perl generates the cnonce insecurely.
The cnonce (client nonce) is generated from an MD5 hash of the PID, the epoch time and the built-in rand function. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
According to RFC 2831, The cnonce-value is an opaque quoted string value provided by the client and used by both client and server to avoid chosen plaintext attacks, and to provide mutual authentication. The security of the implementation
depends on a good choice. It is RECOMMENDED that it contain at least 64 bits of entropy. |
| The OpenSAML C++ library before 3.3.1 allows forging of signed SAML messages via parameter manipulation (when using SAML bindings that rely on non-XML signatures). |
| In Sipwise rtpengine before 13.4.1.1, an origin-validation error in the endpoint-learning logic of the media-relay core allows remote attackers to inject or intercept RTP/SRTP media streams via RTP packets (except when the relay is configured for strict source and learning disabled). Version 13.4.1.1 fixes the heuristic mode by limiting exposure to the first five packets, and introduces a recrypt flag that fully prevents SRTP attacks when both mitigations are enabled. |
| Authentication issue that does not verify the source of a packet which could allow an attacker to create a denial-of-service condition or modify the configuration of the device. |
| Hosts listed in TrustedOrigins implicitly allow requests from the corresponding HTTP origins, allowing network MitMs to perform CSRF attacks. After the CVE-2025-24358 fix, a network attacker that places a form at http://example.com can't get it to submit to https://example.com because the Origin header is checked with sameOrigin against a synthetic URL. However, if a host is added to TrustedOrigins, both its HTTP and HTTPS origins will be allowed, because the schema of the synthetic URL is ignored and only the host is checked. For example, if an application is hosted on https://example.com and adds example.net to TrustedOrigins, a network attacker can serve a form at http://example.net to perform the attack. Applications should migrate to net/http.CrossOriginProtection, introduced in Go 1.25. If that is not an option, a backport is available as a module at filippo.io/csrf, and a drop-in replacement for the github.com/gorilla/csrf API is available at filippo.io/csrf/gorilla. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| The Limit Login Attempts (Spam Protection) plugin for WordPress is vulnerable to IP Address Spoofing in versions up to, and including, 5.3. This is due to insufficient restrictions on where the IP Address information is being retrieved for request logging and login restrictions. Attackers can supply the X-Forwarded-For header with with a different IP Address that will be logged and can be used to bypass settings that may have blocked out an IP address or country from logging in. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
| RISC Zero is a general computing platform based on zk-STARKs and the RISC-V microarchitecture. Due to a missing constraint in the rv32im circuit, any 3-register RISC-V instruction (including remu and divu) in risc0-zkvm 2.0.0, 2.0.1, and 2.0.2 are vulnerable to an attack by a malicious prover. The main idea for the attack is to confuse the RISC-V virtual machine into treating the value of the rs1 register as the same as the rs2 register due to a lack of constraints in the rv32im circuit. Rust applications using the risc0-zkvm crate at versions 2.0.0, 2.0.1, and 2.0.2 should upgrade to version 2.1.0. Smart contract applications using the official RISC Zero Verifier Router do not need to take any action: zkVM version 2.1 is active on all official routers, and version 2.0 has been disabled. Smart contract applications not using the verifier router should update their contracts to send verification calls to the 2.1 version of the verifier. |
| A vulnerability exists in the too permissive HTTP response header web server settings of the SDM600. An attacker can take advantage of this and possibly carry out privileged actions and access sensitive information. |
| Due to the lack of randomness in assigning Object Identifiers in the SAP NetWeaver AS JAVA IIOP service, an authenticated attacker with low privileges could predict the identifiers by conducting a brute force search. By leveraging knowledge of several identifiers generated close to the same time, the attacker could determine a desired identifier which could enable them to access limited system information. This poses a low risk to confidentiality without impacting the integrity or availability of the service. |
| The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if
the patch files are signed before executing the containing run.sh
script. The signing process is kind of an HMAC with a long string as key
which is hard-coded in the firmware and is freely available for
download. This allows crafting malicious "signed" .patch files in order
to compromise the device and execute arbitrary code. |
