Export limit exceeded: 425969 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (425969 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-34971 1 Bytecodealliance 1 Wasmtime 2026-04-15 7.8 High
Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.
CVE-2026-34515 2 Aio-libs, Aiohttp 2 Aiohttp, Aiohttp 2026-04-15 7.5 High
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, on Windows the static resource handler may expose information about a NTLMv2 remote path. This issue has been patched in version 3.13.4.
CVE-2026-34516 2 Aio-libs, Aiohttp 2 Aiohttp, Aiohttp 2026-04-15 7.5 High
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, a response with an excessive number of multipart headers may be allowed to use more memory than intended, potentially allowing a DoS vulnerability. This issue has been patched in version 3.13.4.
CVE-2026-34987 1 Bytecodealliance 1 Wasmtime 2026-04-15 9.9 Critical
Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.
CVE-2026-2285 1 Crewai 1 Crewai 2026-04-15 7.5 High
CrewAI contains a arbitrary local file read vulnerability in the JSON loader tool that reads files without path validation, enabling access to files on the server.
CVE-2026-2287 1 Crewai 1 Crewai 2026-04-15 9.8 Critical
CrewAI does not properly check that Docker is still running during runtime, and will fall back to a sandbox setting that allows for RCE exploitation.
CVE-2026-2286 1 Crewai 1 Crewai 2026-04-15 9.8 Critical
CrewAI contains a server-side request forgery vulnerability that enables content acquisition from internal and cloud services, facilitated by the RAG search tools not properly validating URLs provided at runtime.
CVE-2026-34988 1 Bytecodealliance 1 Wasmtime 2026-04-15 6.3 Medium
Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.
CVE-2026-35186 1 Bytecodealliance 1 Wasmtime 2026-04-15 7.5 High
Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.
CVE-2026-35195 1 Bytecodealliance 1 Wasmtime 2026-04-15 5.4 Medium
Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.
CVE-2026-27226 1 Adobe 2 Adobe Experience Manager, Experience Manager 2026-04-15 5.4 Medium
Adobe Experience Manager versions 6.5.23 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field.
CVE-2026-26205 1 Open-policy-agent 1 Opa-envoy-plugin 2026-04-15 N/A
opa-envoy-plugun is a plugin to enforce OPA policies with Envoy. Versions prior to 1.13.2-envoy-2 have a vulnerability in how the `input.parsed_path` field is constructed. HTTP request paths are treated as full URIs when parsed; interpreting leading path segments prefixed with double slashes (`//`) as authority components, and therefore dropping them from the parsed path. This creates a path interpretation mismatch between authorization policies and backend servers, enabling attackers to bypass access controls by crafting requests where the authorization filter evaluates a different path than the one ultimately served. Version 1.13.2-envoy-2 fixes the issue.
CVE-2025-9416 1 Oitcode 1 Samarium 2026-04-15 2.4 Low
A security flaw has been discovered in oitcode samarium up to 0.9.6. This vulnerability affects unknown code of the file /cms/webpage/ of the component Pages Image Handler. The manipulation results in cross site scripting. The attack may be performed from a remote location. The exploit has been released to the public and may be exploited.
CVE-2025-9039 1 Amazon 1 Ecs 2026-04-15 4.3 Medium
We identified an issue in the Amazon ECS agent where, under certain conditions, an introspection server could be accessed off-host by another instance if the instances are in the same security group or if their security groups allow incoming connections that include the port where the server is hosted. This issue does not affect instances where the option to allow off-host access to the introspection server is set to 'false'. This issue has been addressed in ECS agent version 1.97.1. We recommend upgrading to the latest version and ensuring any forked or derivative code is patched to incorporate the new fixes. If customers cannot update to the latest AMI, they can modify the Amazon EC2 security groups to restrict incoming access to the introspection server port (51678).
CVE-2025-8715 1 Postgresql 1 Postgresql 2026-04-15 8.8 High
Improper neutralization of newlines in pg_dump in PostgreSQL allows a user of the origin server to inject arbitrary code for restore-time execution as the client operating system account running psql to restore the dump, via psql meta-commands inside a purpose-crafted object name. The same attacks can achieve SQL injection as a superuser of the restore target server. pg_dumpall, pg_restore, and pg_upgrade are also affected. Versions before PostgreSQL 17.6, 16.10, 15.14, 14.19, and 13.22 are affected. Versions before 11.20 are unaffected. CVE-2012-0868 had fixed this class of problem, but version 11.20 reintroduced it.
CVE-2025-8713 1 Postgresql 1 Postgresql 2026-04-15 3.1 Low
PostgreSQL optimizer statistics allow a user to read sampled data within a view that the user cannot access. Separately, statistics allow a user to read sampled data that a row security policy intended to hide. PostgreSQL maintains statistics for tables by sampling data available in columns; this data is consulted during the query planning process. Prior to this release, a user could craft a leaky operator that bypassed view access control lists (ACLs) and bypassed row security policies in partitioning or table inheritance hierarchies. Reachable statistics data notably included histograms and most-common-values lists. CVE-2017-7484 and CVE-2019-10130 intended to close this class of vulnerability, but this gap remained. Versions before PostgreSQL 17.6, 16.10, 15.14, 14.19, and 13.22 are affected.
CVE-2025-8709 2 Langchain, Langchain-ai 2 Langchain, Langchain 2026-04-15 7.3 High
A SQL injection vulnerability exists in the langchain-ai/langchain repository, specifically in the LangGraph's SQLite store implementation. The affected version is langgraph-checkpoint-sqlite 2.0.10. The vulnerability arises from improper handling of filter operators ($eq, $ne, $gt, $lt, $gte, $lte) where direct string concatenation is used without proper parameterization. This allows attackers to inject arbitrary SQL, leading to unauthorized access to all documents, data exfiltration of sensitive fields such as passwords and API keys, and a complete bypass of application-level security filters.
CVE-2025-7488 2026-04-15 4.3 Medium
A vulnerability has been found in JoeyBling SpringBoot_MyBatisPlus up to a6a825513bd688f717dbae3a196bc9c9622fea26 and classified as critical. This vulnerability affects the function Download of the file /file/download. The manipulation of the argument Name leads to path traversal. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available.
CVE-2025-6985 1 Langchain-ai 1 Langchain 2026-04-15 7.5 High
The HTMLSectionSplitter class in langchain-text-splitters version 0.3.8 is vulnerable to XML External Entity (XXE) attacks due to unsafe XSLT parsing. This vulnerability arises because the class allows the use of arbitrary XSLT stylesheets, which are parsed using lxml.etree.parse() and lxml.etree.XSLT() without any hardening measures. In lxml versions up to 4.9.x, external entities are resolved by default, allowing attackers to read arbitrary local files or perform outbound HTTP(S) fetches. In lxml versions 5.0 and above, while entity expansion is disabled, the XSLT document() function can still read any URI unless XSLTAccessControl is applied. This vulnerability allows remote attackers to gain read-only access to any file the LangChain process can reach, including sensitive files such as SSH keys, environment files, source code, or cloud metadata. No authentication, special privileges, or user interaction are required, and the issue is exploitable in default deployments that enable custom XSLT.
CVE-2025-6268 2026-04-15 4.3 Medium
A vulnerability classified as problematic has been found in Luna Imaging up to 7.5.5.6. Affected is an unknown function of the file /luna/servlet/view/search. The manipulation of the argument q leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.