| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing. |
| Use after free in Windows DNS allows an unauthorized attacker to elevate privileges over a network. |
| Use after free in Windows DNS allows an authorized attacker to execute code over a network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to a heap-based buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: fix xattr race condition with multiple superblocks
Multiple superblocks with different namespaces can share the same
kernfs_node when kernfs_test_super() finds a matching root but
different namespace. This means multiple inodes from different
superblocks can reference the same kernfs_node->iattr->xattrs
structure.
The VFS layer only holds per-inode locks during xattr operations,
which is insufficient to serialize concurrent xattr modifications on
the shared kernfs_node. This can lead to race conditions in
simple_xattr_set() where the lookup->replace/remove sequence is not
atomic with respect to operations from other superblocks.
Fix this by protecting xattr operations with the existing hashed
kernfs_locks->open_file_mutex[] array, which is already used to
protect per-node open file data. The hashed mutex array provides
scalable per-node serialization (scaled by CPU count, up to 1024 locks
on 32+ CPU systems) with zero memory overhead.
Changes:
- Rename open_file_mutex[] to node_mutex[] to reflect dual purpose
- Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers
- Protect simple_xattr_set() calls in kernfs_xattr_set() and
kernfs_vfs_user_xattr_set() with the hashed mutex
- Update file.c to use new helpers via compatibility wrappers
- Update documentation to explain the extended lock usage |
| An authenticated authorization bypass vulnerability exists in MCP Toolbox for Databases due to missing scope enforcement across older protocol handlers.
While the 2025-11-25 protocol version handler correctly enforces per-tool restrictions defined by scopesRequired, older supported protocol versions (2025-06-18, 2025-03-26, and 2024-11-05) omit this check. An authenticated client with low-privilege tokens (e.g., read) can bypass the intended per-tool scope restrictions and execute high-privilege tools (e.g., admin) simply by specifying an older protocol version in the MCP-Protocol-Version header, or by omitting the header entirely (which causes the server to default to the vulnerable 2024-11-05 handler). |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows DNS allows an unauthorized attacker to execute code over a network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and obtain sensitive information due to an integer underflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to execute arbitrary code due to an out-of-bounds write. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to perform unauthorized operations and access sensitive information due to improper session management. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to improper validation of anti-CSRF tokens. |
| Heap-based buffer overflow in Windows Brokering File System allows an authorized attacker to elevate privileges locally. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to unbounded resource allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF)
When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535).
This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535.
However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel.
If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will
be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer
dereference because local TCP packets do not use frag_list.
Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from
ip6_default_advmss() when MTU is large.
Also update the stale comment in ip6_default_advmss() which suggested
that IPV6_MAXPLEN is returned to mean "any MSS". |
| In the Linux kernel, the following vulnerability has been resolved:
net: fib_rules: Don't dump dying fib_rule in fib_rules_dump().
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the
free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is
wrong: dp_peer->peer_id for an MLO peer always carries the
ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with
index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS
(256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The
intended bitmap entry also never gets cleared, so subsequent
ath12k_peer_ml_alloc() calls eventually run out of IDs.
The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and
is stored in ahsta->ml_peer_id. Use that instead.
While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so
the bitmap and ahsta->ml_peer_id stay in sync.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to a buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to a buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an infinite loop. |
| IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to a buffer overflow from improperly validating client data. By sending malformed requests to one of the host servers, a remote attacker could leverage this vulnerability to cause a denial-of-server (DoS) for that server. |
