| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| containerd is an open-source container runtime. Prior to versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1, a crafted OCI index graph can force very high CPU/memory usage during PullImage (before container start), causing long ContainerCreating stalls and, at larger sizes, node/runtime instability. Versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1 fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: acpi: validate WGDS table revision index
Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when
firmware reports an invalid revision value. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: flush dirty data before punching a hole
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg->online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its percpu iostat, policy data, the parent blkg
reference, and the cgroup css reference — the latter preventing the
cgroup from ever being destroyed.
Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern
used in blkg_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix an off-by-1 boundary check
Before looking at the 11th byte, check the length is big enough. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate rx/tx MLME callback frame lengths before access
cfg80211_rx_mlme_mgmt() and cfg80211_tx_mlme_mgmt() call tracepoints
before rejecting frames shorter than the frame-control field. After
that, they only require len >= 2 before dispatching into subtype
handlers that assume their fixed fields are present.
The frames that trip this are not shorter than 2 bytes; they are short
relative to their subtype. mwifiex is a concrete in-tree example on the
length side: mwifiex_process_mgmt_packet() only requires a 4-address
ieee80211_hdr plus the 2-byte firmware length prefix before handing the
frame to cfg80211_rx_mlme_mgmt(). After stripping the length prefix and
removing addr4, pkt_len can be exactly 24: a bare 3-address management
header with no reason-code body. The existing WARN_ON(len < 2) does not
fire on such a frame, and cfg80211_process_deauth() then reads
u.deauth.reason_code as a two-byte access starting at offset 24,
immediately past the 24-byte buffer.
Add a frame-control length gate, then validate each subtype's minimum
frame size in an if/else-if chain that mirrors the dispatch logic. Trace
only after the frame is known to be well-formed.
Side effects of this change:
- The WARN_ON(len < 2) is dropped. It only guarded the frame_control
read, never the subtype fixed fields, and it does not fire on the
frames that actually trigger the out-of-bounds read (which are >= 2).
The len >= 2 check is kept as the guard before dereferencing
frame_control, but without the warning: these are exported callbacks
and a malformed frame from a driver should be dropped silently rather
than backtraced.
- cfg80211_tx_mlme_mgmt() previously routed every non-deauth subtype
through disassociation handling; it now silently ignores unrecognised
subtypes. |
| Dell Trusted Device Client, versions prior to 8.1.359.0, contain an Incorrect Permission Assignment for Critical Resource vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering. |
| libvips 8.19.0 contains a memory access vulnerability when processing little-endian PFM images. If the PFM text header length is not a multiple of four bytes, the mmap-based loader can expose pixel data at an address that is not properly aligned for float access. vips_avg_scan() subsequently dereferences the buffer through a float pointer, resulting in undefined behavior and process termination on strict-alignment architectures or UBSan-instrumented builds, leading to denial of service. |
| The Gutenverse – WordPress Blocks, Page Builder & Site Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Post Comment Block 'suffixMain' Attribute in all versions up to, and including, 4.0.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress core wp_kses_post sanitization does not mitigate this vulnerability because the payload is stored inside a Gutenberg block delimiter comment rather than as a raw HTML tag, and is only rendered as exploitable HTML at the PHP render stage. |
| The GeoDirectory – WP Business Directory Plugin and Classified Listings Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'business_hours' parameter in all versions up to, and including, 2.8.183 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is possible because the AJAX save handler validates only post authorship and a nonce with no additional capability check, allowing any subscriber-level user who owns a listing to exploit this vulnerability. |
| The Customer Reviews for WooCommerce plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.120.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to permanently delete arbitrary attachments from the Media Library — including administrator-owned product images, logos, and documents — by injecting their IDs into a review that is later trashed and purged. Exploitation requires a public review-form link (a 13-hex formId distributed to customers via e-mail), which exposes the nonce needed to reach the handler without any WordPress account or session. |
| The OpenStation — Desktop Windows, Dock & Virtual Desktops for WP Admin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.1.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to read the title, status, date, permalink, and a 300-character content excerpt of any private, draft, pending, or future post, as well as the content and AI-moderation verdicts of unapproved and spam comments. Any authenticated user with the 'read' capability can self-enable the required AI feature by visiting the /openstation/ portal and toggling their own ai.enabled setting via the POST /desktop-mode/v1/os-settings endpoint, removing any practical barrier to exploitation. |
| The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'output_format' parameter in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the Pro Export/Genius feature to be enabled on the site, as the vulnerable fpd_pr_export AJAX action is only registered when that feature is active. |
| The Better Messages – Chat Rooms, Group Chat, Private Messages & AI Chat Bots plugin for WordPress is vulnerable to generic SQL Injection via 'group_id' Message Meta Parameter in all versions up to, and including, 3.0.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires the BuddyBoss Platform plugin to be installed with its Social Groups component disabled, a state that persists on any site that has previously toggled the Groups component off since BuddyBoss does not drop the wp_bp_groups table upon deactivation. |
| The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'productTitle' in '_fpd_data' Order Item Meta in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The fpd_save_order AJAX action is registered for unauthenticated users via wp_ajax_nopriv_fpd_save_order with no nonce or capability check, and the strip_tags() sanitization applied at save time is bypassed by submitting JSON unicode escape sequences (e.g. \u003c, \u003e), which json_decode() silently converts back to literal angle brackets when the order is rendered in the admin view. |
| The AMP for WP – Accelerated Mobile Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via Regex Transformation in all versions up to, and including, 1.1.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The crafted payload uses only WordPress-permitted comment tags and attributes (an anchor with href and title), and the AMP sanitizer pipeline omits javascript: protocol blocking, meaning neither the comment save filter nor the AMP output stage removes the malicious URI introduced by the transformation. |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'jfb_xss' (URL Query Variable) Parameter via Calculated Field in all versions up to, and including, 3.6.5.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires the targeted page to host a form configured with both a URL Query Variable preset field and a Calculated Field that references it, which are standard plugin features. |
| The GeoDirectory – WP Business Directory Plugin and Classified Listings Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Text-type Custom Field (e.g., 'phone') in all versions up to, and including, 2.8.181 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload must be stored in a text-type custom field (such as a phone field) via the AJAX geodir_save_post endpoint, using entity-encoded angle brackets (e.g., <img src=x onerror=alert(1)>) to bypass the strpos()-gated tag-stripping check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: flush pending RCU callbacks on module unload
Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks
before freeing module text, preventing late callback execution in freed memory.
BUG: unable to handle page fault for address: ffffffffc1d59c40
PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0
Oops: 0010 [#1] SMP NOPTI
RIP: 0010:0xffffffffc1d59c40
Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16.
RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286
RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590
RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290
RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700
R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? rcu_do_batch+0x163/0x450
? rcu_core+0x177/0x1c0
? __do_softirq+0xc1/0x280
? asm_call_irq_on_stack+0xf/0x20
</IRQ>
? do_softirq_own_stack+0x37/0x50
? irq_exit_rcu+0xc4/0x100
? sysvec_apic_timer_interrupt+0x36/0x80
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? cpuidle_enter_state+0xd4/0x360
? cpuidle_enter+0x29/0x40
? cpuidle_idle_call+0x108/0x1a0
? do_idle+0x77/0xf0
? cpu_startup_entry+0x19/0x20
? secondary_startup_64_no_verify+0xbf/0xcb
(cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) |
