| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in the VMware datastore driver of OpenStack glance_store. When an authenticated attacker provides a maliciously crafted image location URI pointing to an external server, the _retry_request function fails to validate the destination host before attaching sensitive authentication headers. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: accurately adjust free_sections during free_segment_range
In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs`
to restrict block allocation to the safe remaining main area while valid
blocks in the truncated range are evacuated by GC.
However, FREE_I(sbi)->free_sections tracks the total number of free
sections across the whole filesystem. If any sections within the
truncated range were already free upon entering free_segment_range(),
failing to deduct them from free_sections causes the filesystem to
overestimate available free sections in the active, reduced main area.
This leads to inconsistent free section accounting during GC data
migration and can trigger unexpected allocation failures or assertion
errors when space is tight.
Fix this by calculating the number of already-free sections in the
truncated range, deducting them from free_sections upon entering
free_segment_range(), and restoring them on exit. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size
The VP control IOCB selects its target virtual port by setting one bit
in vp_idx_map, a fixed 16-byte (128-bit) array in both
vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb()
computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map]
without checking that map stays within the array.
max_npiv_vports is taken from firmware and only sanitized to a
MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or
255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports.
A vp_index above 128 therefore yields map >= 16 and an out-of-bounds
write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB
fields (or the adjacent request-ring slot on the 64-byte layout).
Reject a vp_index that cannot be represented in the IOCB bitmap in
qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in
qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual
63 or 127 NPIV vports are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: bound firmware ID by TLV length
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate version TLV value lengths
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure. |
| The EmbedVideo Extension is a MediaWiki extension which adds a parser function called #ev and various parser tags for embedding video clips from various video sharing services. Prior to 4.1.0, with $wgEmbedVideoRequireConsent disabled (not the default), the urls for videos are passed into an iframe src attribute without sanitization. When given a malformed url or id, the src attribute can be escaped via double quotes, allowing for html/javascript injection. Version 4.1.0 contains a patch. |
| A Server-Side Request Forgery (SSRF) vulnerability exists in the Image API (v2) of OpenStack Glance. When the show_multiple_locations configuration option is enabled in glance-api.conf, an authenticated attacker can manipulate the locations attribute of an image in the queued state by sending a crafted HTTP PATCH request |
| An issue in Wellav Technologies Co., Ltd Wellav WES Emergency Broadcast Terminal WES100, WES270, WES280, and WES290 before 08-08-2023 allows a remote attacker to obtain sensitive information via the global API request wrapper function |
| Missing authorization in Microsoft Windows Search Component allows an authorized attacker to perform tampering locally. |
| Heap-based buffer overflow in Windows Remote Access Connection Manager allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft Windows Speech allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
msc313e_wdt_probe() doesn't set the driver data for the platform device.
As a result, dev_get_drvdata() in msc313e_wdt_suspend() and
msc313e_wdt_resume() will return NULL, leading to a NULL pointer
dereference afterward.
Set the platform device driver data in msc313e_wdt_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
bash -c '
MNT=/mnt/cifs
FILE="$MNT/repro"
# Generate four 1 MiB random blocks: [A][B][C][D].
dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none
# Expected contents after zeroing B: [A][zero][C][D].
cp /tmp/src /tmp/expected
dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \
conv=notrunc status=none
cp /tmp/src "$FILE"
# Populate FS-Cache, then discard the page cache.
sync
echo 1 > /proc/sys/vm/drop_caches
cat "$FILE" > /dev/null
sync
echo 1 > /proc/sys/vm/drop_caches
fallocate --zero-range -o 1M -l 1M "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Before this change, the readback differs from /tmp/expected:
readback: STALE DATA
After this change, it matches:
readback: OK |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
