| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libungif library before 4.1.0 allows attackers to cause a denial of service via a crafted GIF file that triggers a null dereference. |
| VERITAS Backup Exec 9.0 through 10.0 for Windows Servers, and 9.0.4019 through 9.1.307 for Netware, allows remote attackers to cause a denial of service (Remote Agent crash) via (1) a crafted packet in NDMLSRVR.DLL or (2) a request packet with an invalid (non-0) "Error Status" value, which triggers a null dereference. |
| The Q.931 dissector in Ethereal before 0.10.0, and Tethereal, allows remote attackers to cause a denial of service (crash) via a malformed Q.931, which triggers a null dereference. |
| The uipc system calls (uipc_syscalls.c) in OpenBSD 2.9 and 3.0 provide user mode return instead of versus rval kernel mode values to the fdrelease function, which allows local users to cause a denial of service and trigger a null dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| Null pointer dereference in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network. |
| The application does not validate the presence of required appearance (AP) data before accessing stamp annotation resources. When a PDF contains a stamp annotation missing its AP entry, the code continues to dereference the associated object without a prior null or validity check, which allows a crafted document to trigger a null pointer dereference and crash the application, resulting in denial of service. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker might be able to trigger a null pointer dereference. A successful exploit of this vulnerability might lead to denial of service. |
| A vulnerability exists in the RTU500 web server component that can cause a denial of service to the RTU500 CMU application if a specially crafted message sequence is executed on a WebSocket connection.
An attacker must be properly authenticated and the test mode function of RTU500 must be enabled to exploit this vulnerability.
The affected CMU will automatically recover itself if an attacker successfully exploits this vulnerability. |
| Cesanta Mongoose commit b316989 was discovered to contain a NULL pointer dereference via the scpy function at src/fmt.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted MQTT packet. |
| A null pointer dereference vulnerability in Macrium Reflect prior to 8.1.8017 allows a local attacker to cause a system crash or potentially elevate their privileges via executing a specially crafted executable. |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. |
| An uninitialized pointer dereference in the ngap_handle_pdu_session_resource_setup_response routine of OpenAirInterface CN5G AMF (oai-cn5g-amf) up to v2.0.0 allows attackers to cause a Denial of Service (DoS) via a crafted PDU Session Resource Setup Response. |
| If a DHCPv4 client sends a request with some specific options, and Kea fails to find an appropriate subnet for the client, the `kea-dhcp4` process will abort with an assertion failure. This happens only if the client request is unicast directly to Kea; broadcast messages do not cause the problem.
This issue affects Kea versions 2.7.1 through 2.7.9, 3.0.0, and 3.1.0. |
| NULL Pointer Dereference vulnerability in Avast Antivirus on MacOS, Avast Anitvirus on Linux when scanning a malformed Windows PE file causes the antivirus process to crash.This issue affects Antivirus: 16.0.0; Anitvirus: 3.0.3. |
| Due to the memory corruption vulnerability in SAP NetWeaver AS ABAP and ABAP Platform, an unauthenticated attacker can send a corrupted SAP Logon Ticket or SAP Assertion Ticket to the SAP application server. This leads to a dereference of NULL which makes the work process crash. As a result, it has a low impact on the availability but no impact on the confidentiality and integrity. |
| A vulnerability, which was classified as problematic, has been found in Khronos Group glslang 15.1.0. Affected by this issue is the function glslang::TIntermediate::isConversionAllowed of the file glslang/MachineIndependent/Intermediate.cpp. The manipulation leads to null pointer dereference. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| NULL pointer dereference for some Intel(R) MLC software before version v3.11b may allow an authenticated user to potentially enable denial of service via local access. |
